Honeywell HHT-090 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Honeywell HHT-090 (20 Seiten) in der Kategorie Luftreiniger. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE
SAFETY INSTRUCTIONS
BEFORE USING THIS AIR
PURIFIER
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Read all instructions before operating the air
purifier.
2. Place air purifier where it is not easily knocked
over by persons in the household.
3. Always turn the air purifier controls to the OFF
position and unplug from the wall outlet when
not in use.
4. To disconnect the model HHT-090 series air
purifiers, press the Power button to turn the
unit off, grip the plug and pull it from the wall
outlet. Never pull by the cord.
5. Do not use any product with a damaged cord
or plug or if product malfunctions, is dropped
or damaged in any manner. Keep the cord
away from heated surfaces.
6. Do not use air purifier outdoors.
7. Never use air purifier unless it is fully
assembled.
8. Do not run power cord under carpets, and do
not cover with throw rugs. Arrange cord such
that it will not be tripped over.
9. Do not use air cleaner where combustible
gases or vapors are present.
10. Do not expose the air purifier to rain, or use
near water, in a bathroom, laundry area or
other damp location.
11. The air purifier must be used in its upright
position.
12. Do not allow foreign objects to enter ventilation
or exhaust opening as this may cause electric
shock or damage to the air purifier. Do not
block air outlets or intakes.
13. Locate air purifier near the outlet and avoid
using an extension cord.
14. This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
shock, this plug is intended to fit only one way
in a polarized outlet. If the plug does not fit
fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature.
15. A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
16. Do not sit, stand or place heavy objects on the
air purifier.
17. Disconnect power supply before servicing.
WARNING: To Reduce The Risk of Fire or
Electric Shock, Do Not Use This Air Purifier
With Any Solid-State Speed Control Device.
PERMANENT
HEPA TOWER
AIR PURIFIERS
For Model Series
HHT-090
HHT-090_OM_Trilingual.qxd 10/21/05 11:37 AM Page 1
YOUR AIR PURIFIER
HOW YOUR AIR PURIFIER WORKS
This model air purifier incorporates a 3-stage cleaning
system to help clean the air that passes through the filter
in the unit (Fig. 1).
Stage 1: Washable Particle Pre-Filter
Stage 2: 99% HEPA-Type Filter with antimicrobial treatment
Stage 3: Electronic Ionizer
Fig. 1
SET-UP
Select a firm, level and flat location. For proper airflow, locate the unit at least 3 feet (1 M) from any
wall or furniture.
When operating, large volumes of air are drawn toward the air purifier. Surrounding areas should be
cleaned and/or vacuumed frequently to prevent build-up of dust and other contaminates. This may also
help prolong the life of the filter. If the unit is placed on a light colored carpet, a small mat or rug
should be used underneath to prevent permanent staining. This is especially important in homes with
contamination from smoking or fireplaces.
Control Panel
HEPA-
Type
Filters
(2)
Pre-filter (1)
Rear
Grille
HHT-090_OM_Trilingual.qxd 10/21/05 11:37 AM Page 2
OPERATION
Ensure the air purifier is plugged into a working electrical outlet.
Press the power button ( ) once. The unit will automatically start at medium
power (Fig. 3).
Press the power button again to select a different cleaning level.
It is recommended you run your air purifier 24 hours a day to ensure
continuous cleaning.
Portable air purifiers are more effective in rooms where all doors and
windows are closed.
Fig. 3
IONIZER FEATURE
The Ionizer helps boost the performance of the air purifier and helps freshen the
air.
Press the Ionizer Control button ( ) (Fig. 4). The button will illuminate and the
ionizer will turn on.
To turn the Ionizer feature off, simply press the button again. The button will no
longer be illuminated.
Fig. 4
INSTALL HEPA-TYPE FILTERS
The HEPA-Type Filters are supplied within the air purifier. They are wrapped to ensure purity.
Turn off and unplug the air purifier.
Remove the rear grille by pressing the notch on the top of the rear grille and
pulling the grille towards you.
Remove the filters by gently pushing along the edge of the filter frame and
pulling it forward. Repeat for the second filter.
Remove the protective wrap from the filters.
Place the filters back into the air purifier housing and snap the rear grille back
into place.
Note that the pre-filter needs to be in position along the rear grille before snapping
the grille back into place.
Fig. 2
HHT-090_OM_Trilingual.qxd 10/21/05 11:37 AM Page 3


Produktspezifikationen

Marke: Honeywell
Kategorie: Luftreiniger
Modell: HHT-090

Brauchst du Hilfe?

Wenn Sie Hilfe mit Honeywell HHT-090 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Luftreiniger Honeywell

Bedienungsanleitung Luftreiniger

Neueste Bedienungsanleitung für -Kategorien-