Honeywell HFD280 Bedienungsanleitung

Honeywell Luftreiniger HFD280

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Honeywell HFD280 (18 Seiten) in der Kategorie Luftreiniger. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/18

IMPORTANT SAFETY

INSTRUCTIONS

READ AND SAVE THESE

SAFETY INSTRUCTIONS

BEFORE USING THIS

AIR CLEANER

When using electrical appliances, basic

precautions should always be followed to

reduce the risk of fire, electric shock, and

injury to persons, including the following:

1. Read all instructions before operating the

air cleaner.

2. Place air purifier where it is not easily knocked

over by persons in the household.

3. Always turn the air cleaner controls to the

OFF position and unplug from the wall outlet

when not in use.

4. To disconnect the air cleaner, press the

Power button to turn the unit off, grip the plug

and pull it from the wall outlet. Never pull by

the cord.

5. Do not use any product with a damaged cord

or plug or if product malfunctions, is dropped

or damaged in any manner. Keep the cord

away from heated surfaces.

6. Do not use air cleaner outdoors.

7. Never use air cleaner unless it is fully

assembled.

8. Do not run power cord under carpets, and do

not cover with throw rugs. Arrange cord such

that it will not be tripped over.

9. Do not use air cleaner where combustible

gases or vapors are present.

10. Do not expose the air cleaner to rain, or use

near water, in a bathroom, laundry area or

other damp location.

11. The air cleaner must be used in its upright

position.

12. Do not allow foreign objects to enter ventilation

or exhaust opening as this may cause electric

shock or damage to the air cleaner. Do not

block air outlets or intakes.

13. Locate air cleaner near the outlet and avoid

using an extension cord.

14. This appliance has a polarized plug (one blade

is wider than the other). To reduce the risk

of shock, this plug is intended to fit only one

way in a polarized outlet. If the plug does not

fit fully in the outlet, reverse the plug. If it still

does not fit, contact a qualified electrician.

DO NOT attempt to defeat this safety feature.

15. A loose fit between the AC outlet (receptacle)

and plug may cause overheating and a

distortion of the plug. Contact a qualified

electrician to replace loose or worn outlet.

16. Do not sit, stand or place heavy objects on the

air purifier.

17. Disconnect power supply before servicing.

Note: For FCC compliance information,

please see last page of this manual.

WARNING: To Reduce The Risk of

Fire or Electric Shock, Do Not Use This

Air Purifier With Any Solid-State Speed

Control Device.

AIRGENIUS 4

COMPACT TOWER

AIR CLEANER/ODOR

REDUCER

For Model Series

HFD28X

Honeywell is a trademark of Honeywell International Inc., used under license by Helen of Troy Limited.

Honeywell International Inc. makes no representation or warranties with respect to this product.

OPERATION

• Ensure the air cleaner is plugged into a working

electrical outlet.

• Press the power button ( ) once. The unit will start at

the “general cleaning” level and remain on this setting until

another cleaning level is chosen (Fig. 2).

• Press the ( ) button to select a different cleaning level.

Portable air purifiers are more effective in rooms where

all doors and windows are closed. In general, it is

recommended that you run your air purifier while you are

at home to clean the air. Fig. 2

YOUR AIR PURIFIER

HOW YOUR AIR CLEANER WORKS

This model air cleaner incorporates a 3-stage cleaning

system to clean the air that passes through the filters

in the unit (Fig. 1).

Stage 1: Washable or Odor-Reducing Pre-filter

(your choice) attaches to the rear grille.

Captures larger airborne particles and traps

odors and VOCs (when used with Optional

Kpre-filter).

Stage 2: Permanent Washable ifD® Filter.

Captures microscopic airborne particles.

Stage 3: Electronic Ionizer boosts the cleaning power.

Fig. 1

SET-UP

• Select a firm, level and flat location. For best airflow, locate the unit 6 inches from any wall or furniture.

• When operating, large volumes of air are drawn toward the air cleaner. Surrounding areas should be

cleaned and/or vacuumed frequently to prevent build-up of dust and other contaminants. This may also

help prolong the life of the filter. If the unit is placed on a light colored carpet, a small mat or rug should

be used underneath to prevent staining. This is especially important in homes with contamination from

smoking or fireplaces.

ENERGY STAR®

This product earned the ENERGY STAR® by meeting strict energy efficiency guidelines set by

the U.S. EPA. The U.S. EPA does not endorse any manufacturer claims of healthier indoor air

from the use of this product.

The energy efficiency of this ENERGY STAR® qualified model is measured based on a ratio

between the model’s CADR for Dust and the electrical energy it consumes, or CADR/Watt.

Front Grille

Permanent Washable

ifD® Filter

OPTIONAL:

Odor-Reducing

Pre-filter

(packed in plastic bag)

Installed

Washable

Pre-filter

Rear

Grille

2 3

ENHANCED ODOR REDUCTION

The washable mesh pre-filter came installed in your air purifier and removes larger particles from the air

that passes through the filter. You may use this washable mesh pre-filter, or you have the choice to use

the Optional Odor & VOC Reducing KPre-filter that is packed in a bag that came with the air purifier. In

addition to capturing larger particles, the KPre-filter will also trap common household odors and gases.

If you choose to use the KPre-filter, you must remove the installed washable mesh pre-filter then insert

the KPre-filter. Note: the KPre-filter cannot be washed and should be replaced every 3 months for

optimum performance.

NOTE: Please only use one pre-filter in your air cleaner at a time. You will need to choose whether you

want to use the permanent washable pre-filter or the replaceable Odor & VOC Reducing

Pre-filter.

Both are included with your air cleaner at the time of purchase.

(air intake is at the rear

grille and output is from

the front grille)

CONTROLS THAT DO THE THINKING FOR YOU CONTROLS THAT DO THE THINKING FOR YOU (CONTINUED)

Auto-off Timer

Sleep/Quiet

Setting

General Cleaning

Setting

Check Filters

Reset Button

Allergen Reduction

Setting

Max Cleaning Setting

Purification Level

Button

Oscillation Button

Light Dimmer

Button

Power Button

HFD28X Series

Purification Level Button – Once you have pressed the Power Button, use the Purification Level Button

() to select the desired air cleaning level. Your air cleaner will start on the General Cleaning setting each

time you turn the air cleaner on. Continue to press the ( ) button to cycle through cleaning levels to reach

the desired setting. Here is a handy reference to help get the most out of your air cleaner’s performance:

LEVEL 4 - MAX

Best for power cleaning the air when unpleasant odors are noticeable, your room is particularly dusty, or you

can sense that airborne particles are present. This setting cleans the air the fastest of all the settings and can

circulate the air frequently in the room.

LEVEL 3 - ALLERGEN

This setting makes the air cleaner perform at the proper level for reducing many types of airborne allergens.

It ensures the allergen capturing efficiency and rate are best for the particle sizes being captured. Best for

fighting airborne allergens during high allergen season, particularly in the spring and fall to help reduce

airborne pollen. Also great for year-round reduction of pet dander allergens.

LEVEL 2 - GENERAL

Best for General Cleaning. Use this setting to help reduce airborne dust and smoke particles, like those from

cooking or tobacco smoke.

LEVEL 1 - SLEEP

Best for ultra quiet operation, perfect for nighttime use when sleeping.

Oscillate Button – To help circulate fresher, cleaner air through the room, this unit has an oscillation feature.

To turn Oscillation on, simply press the Oscillation button ( ) once. To turn Oscillation off, press the

button again.

Auto-off Timer Button – Push the ( ) button if you would like your air cleaner to run and then automatically

shut-off after a certain amount of time (choose from between 2, 4 and 8 hours). This is convenient if you

would like your air cleaner to run during the night but then shut-off automatically in the morning (choose the

8 hour setting).

Dimmer Button – () allows you to adjust the brightness of the LED display on the control panel. You may

wish to adjust the brightness depending on the room where the unit is placed.

• The unit always turns on with brightness on HIGH

• The LED lights cannot be turned completely off

• Press the ( ) button once and LED display will dim to Low setting

• Pressing the ( ) button a 2nd time will turn the LED light brightness back to HIGH.

Check Filters Button – When it is time to check and clean the filters, an indicator light will illuminate.

When this light comes on, you will need to clean the primary ifD® filter and clean or replace the pre-filter.

(See Filter Cleaning instructions on pages 6-7). It is recommended that you periodically check the filters.

Depending on operating conditions, the filters should be cleaned every 3 months. If you have chosen to

use the Odor & VOC Reducing

Pre-filter, it is not washable and should be replaced after 3 months. After

you have cleaned or replaced the filters, you will need to RESET the Electronic Filter Check.

To RESET the Electronic Filter Check:

After the ifD® filter and pre-filter have been cleaned/replaced and re-installed in the unit, plug the unit into the

power outlet with the unit still in POWER OFF mode, press and hold the CHECK FILTERS RESET button for 3

seconds. The CHECK FILTERS red LED will flash twice and shut off indicating the filter check has been reset. The

red LED will no longer be illuminated. The cleaning intervals are intended as guidelines only. Performance of any

filter media is dependent upon the concentration of contaminants going through the system. High concentrations

of contaminants such as dust, pet dander and smoke particles will reduce the useful performance of the filter

and they may need to be cleaned more frequently.

REMOVING THE FILTERS

CAUTION: Turn off the unit and wait 60 seconds before removing

the grille to clean filters.

The ifD® filter comes installed inside the air cleaner.

• Turn-off the air cleaner. Wait 60 seconds and unplug the unit before

removing the grille.

• Press down on the tab on the rear grille and pull the grille down and

toward you. Remove the grille.

• With one hand, hold the air purifier steady and use other hand to grasp

ifD® filter by the molded plastic handle at top and pull out. (Fig. 3)

• To place the ifD® filter back into the air cleaner housing, insert at

bottom and ensure it is pushed in as far as it can go, then push in

from the top. You will hear an audible “click”.

• Return the rear grille to the purifier housing. You will hear an audible “click” when the grille is

installed correctly.

Fig. 3

Produktspezifikationen

Marke:	Honeywell
Kategorie:	Luftreiniger
Modell:	HFD280

Brauchst du Hilfe?

Wenn Sie Hilfe mit Honeywell HFD280 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Luftreiniger Honeywell

Honeywell F116A1120 Bedienungsanleitung

28 August 2024

Honeywell F120 Bedienungsanleitung

28 August 2024

Honeywell F118 Bedienungsanleitung

28 August 2024

Honeywell HPA5200 Bedienungsanleitung

27 August 2024

Honeywell HPA5100 Bedienungsanleitung

27 August 2024

Honeywell HPA-245 Bedienungsanleitung

27 August 2024

Honeywell HHT-080 Bedienungsanleitung

27 August 2024

Honeywell HPA180 Bedienungsanleitung

27 August 2024

Honeywell QuietClean HFD230 Bedienungsanleitung

27 August 2024

Honeywell HHT-081 Bedienungsanleitung

27 August 2024

Bedienungsanleitung Luftreiniger

Neueste Bedienungsanleitung für -Kategorien-

Trotec TAC 5000 Bedienungsanleitung

16 Oktober 2024

Duux DXPU07 Bright Bedienungsanleitung

16 Oktober 2024

Taurus AP2030 Bedienungsanleitung

16 Oktober 2024

TruSense Z-2000 Bedienungsanleitung

16 Oktober 2024

Ulsonix AIRCLEAN 20G Bedienungsanleitung

16 Oktober 2024

Philips AC5602 Bedienungsanleitung

15 Oktober 2024

Winix AUS-5500 Bedienungsanleitung

14 Oktober 2024

Homedics AR-35 Bedienungsanleitung

14 Oktober 2024

Vax AP02 Bedienungsanleitung

10 Oktober 2024

Whynter AFR-300 Bedienungsanleitung

10 Oktober 2024