Hawking Technologies HPOW5 Bedienungsanleitung

Hawking Technologies Zugangspunkt HPOW5

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hawking Technologies HPOW5 (125 Seiten) in der Kategorie Zugangspunkt. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/125



High Power Outdoor WiFi Access Point/Bridge HPOW5/HPOW10D

transmied, transcribed, stored in a retrieval system, or translated into any language or computer language, in any

form or by any means, electronic, mechanical, magnec, opcal, chemical, manual or otherwise, without the prior

wrien permission of this company

LIMITED WARRANTY

Hawking Technology guarantees that every HPOW5 Hawking High Power Outdoor WiFi Access Point/Bridge and

HPOW10D Hawking High Power Outdoor WiFi Direconal Access Point/Bridge is free from physical defects in

material and workmanship under normal use for one (1) year from the date of purchase. If the product proves

defecve during this one-year warranty period, call Hawking Customer Service in order to obtain a Return

Authorizaon number. Warranty is for repair or replacement only. Hawking Technology does not issue any

refunds. BE SURE TO HAVE YOUR PROOF OF PURCHASE. RETURN REQUESTS CAN NOT BE PROCESSED WITHOUT

PROOF OF PURCHASE. When returning a product, mark the Return Authorizaon number clearly on the outside of

the package and include your original proof of purchase.

IN NO EVENT SHALL HAWKING TECHNOLOGY’S LIABILTY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT,

INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS

ACCOMPANYING SOFTWARE OR ITS DOCUMENTATION. Hawking Technology makes no warranty or

representaon, expressed, implied or statutory, with respect to its products or the contents or use of this

documentaon and all accompanying soware, and specically disclaims its quality, performance, merchantability,

or tness for any parcular purpose. Hawking Technology reserves the right to revise or updates its products,

soware, or documentaon without obligaon to nofy any individual or enty. Please direct all inquiries to:

techsupport@hawkingtech.com

Federal Communicaon Commission

Interference Statement

FCC Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a

residenal installaon. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons.

However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does

cause harmful interference to radio or television recepon, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separaon between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected.

4. Consult the dealer or an experienced radio technician for help.

FCC Caution

This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm

spacing must be provided between computer mounted antenna and person’s body (excluding extremities of

hands, wrist and feet) during wireless modes of operation.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the

authority to operate equipment.

Federal Communication Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid

the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be

less than 20cm (8 inches) during normal operation.

The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause radio interference in which case the

user may be required to take adequate measures.

Table of Contents

Chapter I: Product Information ..................................................................................................................... 7

1-1 Introduction ........................................................................................................................................ 7

1-2 Safety Information ............................................................................................................................ 10

1-3 System Requirements ....................................................................................................................... 10

1-4 Package Contents ..............................................................................................................................11

1-5 Product Overview ............................................................................................................................. 11

Chapter II: System and Network Setup ....................................................................................................... 13

2-1 Build Network Connection ................................................................................................................ 13

2-2 Definitions of HPOW5/HPOW10D Supported Modes ...................................................................... 14

2-3 Connecting to the HPOW5/HPOW10D via Web Browser . ................................................................ 18

2-3-1 Windows XP IP address setup .................................................................................................... 18

2-3-2 Windows 7/8 IP address setup .................................................................................................. 21

2-3-3 Mac OS X IP Address Setup ........................................................................................................ 23

2-3-4 Accessing the Web Page User Interface .................................................................................... 23

Chapter III: Setup Wizard ............................................................................................................................ 25

3-1 Router AP Setup ................................................................................................................................ 25

3-1-1 Internet Connecon Type........................................................................................................... 26

3-1-2 DNS ............................................................................................................................................ 26

3-1-3 LAN setup ................................................................................................................................... 27

3-1-4 DHCP Server ............................................................................................................................... 27

3-1-5 Wireless Setup ........................................................................................................................... 27

3-1-6 Wireless Security ........................................................................................................................ 29

3-2 AP Mode Setup ................................................................................................................................. 32

3-2-1 LAN setup ................................................................................................................................... 33

3-2-2 DNS ............................................................................................................................................ 33

3-2-3 Wireless Setup ........................................................................................................................... 33

3-2-4 Wireless Security ........................................................................................................................ 35

3-3 WDS Mode Setup .............................................................................................................................. 38

3-3-1 LAN Setup ..................................................................................................................................39

3-3-2 DNS ............................................................................................................................................ 39

3-3-3 Wireless Setup ........................................................................................................................... 39

3-3-4 WDS Setup/Wireless Security .................................................................................................... 41

3-4 Client Bridge + Repeater AP Mode ................................................................................................... 43

3-4-1 LAN setup ................................................................................................................................... 44

3-4-2 DNS ............................................................................................................................................ 44

3-4-3 DHCP Server ............................................................................................................................... 44

3-4-4 Wireless Staon Setup ............................................................................................................... 45

3-4-5 Wireless Security ........................................................................................................................ 46

3-4-6 Repeater AP Setup ..................................................................................................................... 49

3-4-7 Repeater Wireless Security ........................................................................................................ 49

3-5 CPE + Repeater AP Mode (WISP) ...................................................................................................... 52

3-5-1 Internet Connecon Type........................................................................................................... 53

3-5-2 DNS ............................................................................................................................................ 53

3-5-3 LAN setup ................................................................................................................................... 53

3-5-4 DHCP Server ............................................................................................................................... 54

3-5-5 Wireless Staon Setup ............................................................................................................... 54

3-5-7 Repeater AP Setup ..................................................................................................................... 57

3-5-8 Wireless Security ........................................................................................................................ 58

Chapter IV: System Settings ........................................................................................................................ 60

4-1 WAN Setup ........................................................................................................................................ 60

4-1-1 Internet Connecon Type: Stac IP ........................................................................................... 60

4-1-2 Internet Connecon Type: Dynamic IP (Default) ....................................................................... 60

4-1-3 Internet Connecon Type: PPPoE .............................................................................................. 60

4-1-4 Internet Connecon Type: PPTP ................................................................................................ 61

4-1-5 DNS ............................................................................................................................................ 63

4-1-6 NAT ............................................................................................................................................ 63

4-1-7 MAC Clone . ................................................................................................................................ 63

4-2 CPE (WISP) Setup .............................................................................................................................. 64

4-2-1 Internet Connecon Type: Stac IP ........................................................................................... 64

4-2-2 Internet Connecon Type: Dynamic IP (Default) ....................................................................... 64

4-2-3 Internet Connecon Type: PPPoE .............................................................................................. 64

4-2-4 Internet Connecon Type: PPTP ................................................................................................ 65

4-2-5 DNS ............................................................................................................................................ 67

4-2-6 NAT ............................................................................................................................................ 67

4-2-7 MAC Clone . ................................................................................................................................ 67

 Support WEP and AES data encrypon over WDS link

Quality of Service

 Download and Upload trac control

 IEEE802.11e WMM

System Administraon

 Intuive Web Management Interface

 Password Protected Access

 Firmware upgrade via Web

 Reset to Factory Defaults

 Proles Conguraon Backup and Restore

 One-buon-click to reset factory default

 Two administrator accounts

 Remote Link Test Display connect stascs –

 Full Stascs and Status Reporng

 NTP Time Synchronizaon

 Even Log

 Support SNMP v1, v2c, v3

 SNMP Traps to a list of IP Address

 Support MIB II

 Ping Watchdog

 CLI access via Telnet and SSH

 Administrave Access : HTTP and HTTPS

 UPnP (Universal Plug and Play)

1-2 Safety Informaon

In order to keep the safety of users and property, please follow these safety instrucons:

1. This access point is designed for outdoor use and is weather resistan t.

2. DO NOT put this access point at or near hot or humid places, like kitchens or bathrooms. Also, do not leave this

access point in the car in summer.

3. DO NOT pull any connected cable with force; disconnect them from the access point rst.

4. If you want to place this access point in a high place or hang on the wall, please make sure the access point is

rmly secured. Falling can damage the access point and its accessories and the warranty will be void.

5. Accessories of this access point, like antennas and power supply, are a danger to small children under 3 years

old. KEEP THIS ACCESS POINT OUT OF THE REACH OF CHILDREN!

6. The access point will become warm when used for a long period of me (This is normal and is not a

malfuncon). DO NOT put this access point on paper, cloth, or other ammable materials.

7. There are no user-serviceable parts inside the access point. If you have found that the access point is not

working properly, please contact technical support or your place of purchase and ask for help. DO NOT

disassemble the access point, or warranty will be void.

8. If the access point falls into water when it’s powered on, DO NOT use your hands to pick it up. Switch the

electrical power o before you do anything, or contact an experienced technician for help.

9. If you smell something strange, or see smoke coming out from the access point or power supply, remove the

power supply or switch the electrical power o immediately, and call techsupport or your place of purchase for

help.

1-3 System Requirements

 One computer (Mac or PC).

 Internet Web Browser (Internet Explorer, Safari, etc.)

 A Wired or Wireless network adapter (e.g. Airport card, built-in Ethernet adapter, etc.)

1-4 Package Contents

Before you start to use this access point, please check if there’s anything missing in the package, and contact your

place of purchase or contact Hawking Technologies.

• 1x HPOW5/HPOW10D

• 1x RJ45 Cable

• 1x Power Adapter (Power Supply)

• 1x Power Over Ethernet (PoE) Adapter

• 1x Wall Mounng Kit

• 2x Cable Ties for Stand/Pole mounng

• 1x Setup CD (includes Manual/QIG)

• 1x Quick Installaon Guide (QIG)

1-5 Product Overview

(1) LAN2’s Ethernet port

(2) LED Indicator for LAN2

(3) Reset Buon. Press and hold the reset buon for at least 15 seconds to factory reset the device.

(4) LAN1 (PoE) Ethernet port

(5) LED indicator for LAN1

(6) Power LED

(7) Grounding Connecon: Grounding cable can protect this device from lightning strikes and buildup of

stac electricity. Grounding cable not included in the package. We suggest 16- AWG grounding cable. 18

(8) LED for strong/weak WiFi Signal Indicator for Client Bridge, Repeater AP, WISP + Repeater AP modes

(9) Ethernet cable guide ports. These can be popped out to guide your Ethernet cables out of the device.

Guide your Ethernet cables through here so you can close the outside latch.

Chapter II: System and Network Setup

2-1 Build Network Connecon

Please follow the following instructions to build the network connecon between your new HPOW5/HPOW10D

access point and your computers and other network devices:

1. Remove cover from device. Press the center tab (you may need a athead screwdriver) and the cover should

be able to be removed with a small amount of force.

2. Connect the A/C power adapter to the wall socket, and then connect it to the ‘Power’ socket of the PoE

injector. Connect a Ethernet cable from the “P + Data Out” port on the PoE injector into the

HPOW5/HPOW10D LAN1(POE) Port.

3. Connect your HPOW5/HPOW10D from the “10/100 Data in” on the PoE injector to your computer/network.

4. Congure the IP Address of your computer to be in the same range as the HPOW5/HPOW10D ( )

see secon 2-3

Log into the setup page to congure the HPOW5/HPOW10D

2-2 Denions of HPOW5/HPOW10D Supported Modes

Modes

The HPOW5/HPOW10D supports 6 dierent modes.

When Router AP mode is chosen, the system can be congured as a Wireless Router. In this mode, the device is

supposed to be connected to internet via ADSL/Cable Modem. The NAT is enabled and PCs in LAN/WLAN port

share the same IP to ISP through the WAN port. The connecon type can be setup in WAN page by using stac IP,

Dynamic IP, PPPoE or PPTP client. Go to

secon 3-1

When AP mode is chosen, the system can be congured as a standard wireless access point. In this mode, the

device can be used as an Access Point for wireless client connecon. All Ethernet ports wand wireless interfaces

are bridged together. Go to secon 3-2

When WDS mode is chosen, the system can be congured in WDS Mode. In this mode, WDS (Wireless Distribuon

Service, creates a wireless backbone link between mulple access points that are part of the same wireless

network. This allows a wireless network to be expanded using mulple access points without the need for a wired

backbone to link them. We can only guarantee WDS will only work with the HPOW5 and the HPOW10D devices.

Do not use other devices to set up a WDS network. Go to

secon 3-3

When Client Bridge + Repeater AP Mode is chosen, the system can be congured in bridged mode. In this mode,

the device can connect to other Access Points via a wireless link and be used to bridge wired clients to the

network. Go to

secon 3-4

In this mode, the device can connect to other Access Points via a wireless link and be used to bridge wired clients

to the network and work as a wireless repeater for wireless devices. All Ethernet ports and repeater access points

are bridged together. Go to

secon 3-4

When CPE + Repeater AP Mode is chosen, the system can be congured in Wireless repeater mode. In this mode,

the device can wirelessly connect to a WISP (wireless internet service provider), ie. Another wireless AP, HotSpot,

etc. It can then wirelessly repeat the signal and can even act as a router for these signals. NAT is enabled and

wired and wireless computers can share the same IP range. Go to secon 3-5

2-3 Connecng to the HPOW5/HPOW10D via Web Browser

Aer the network connecon is built, the next step you should do is setup the access point with proper network

parameters, so it can work properly in your network environment.

Before you can connect to the access point and start conguraon procedures, your computer must be set to

stac IP. Please follow the following instrucons to congure your computer to use a stac IP address:

If the operang system of your computer is….

Windows XP - please go to secon 2-3-1

Windows Vista/7 - please go to secon 2-3-2

Mac OS - please go to secon 2-3-3

2-3-1 Windows XP IP address setup

1. Click ‘Start’ buon (it should be located at lower-le corner of your computer), then click control panel. Double-

click icon, click and then double-click Network and Internet Connecons Network Connecons, Local Area

Connecon, Local Area Connecon Status window will appear, and then click ‘Properes’

2. Select ‘Use the following IP address’, then input the following sengs in respecve eld:

IP address: 192.168.2.20

Subnet Mask: 255.255.255.0

click ‘OK’ when nished.

2-3-2 Windows 7/8 IP address setup

1. Click ‘Start’ buon (it should be located at lower-le corner of your computer), then click control panel. Click

View Network Status and Tasks Change Adapter Sengs. Local Area Network, then select , then click Right-click

‘Properes’. Local Area Connecon Properties window will appear, select ‘Internet Protocol Version 4 (TCP / IPv4),

and then click ‘Properes’

2. Select ‘Use the following IP address’, then input the following sengs in respecve eld:

IP address: 192.168.2.20

Subnet Mask: 255.255.255.0

click ‘OK’ when nish.

2-3-3 Mac OS X IP Address Setup

1) Go to your system preferences, go to network.

2) Select your Ethernet adapter. IPv4 Manually Make sure next to “Congure ”, you have it set under “ ”

IP Address 192.168.2.20

Subnet Mask: 255.255.255.0

Click ‘Apply’ when nished

2-3-4 Accessing the Web Page User Interface

Aer the IP address setup is complete, please open your web browser.

In the address eld, please type: ‘192.168.2.254’ and press enter.

The following message should be shown:

For username and passwords, see the table below:

Root Account

Admin Account

Username:

root

admin

Password:

default

admin

Chapter III: Setup Wizard

This secon will outline how to access the setup wizard for each of the modes in the HPOW5/HPOW10D

3- Router AP Setup 1

When Router AP mode is chosen, the system can be congured as a Wireless Router. In this mode, the device is

supposed to be connected to internet via ADSL/Cable Modem. The NAT is enabled and PCs in LAN/WLAN port

share the same IP to ISP through the WAN port. The connecon type can be setup in WAN page by using stac IP,

Dynamic IP, PPPoE or PPTP client. This secon provides a detailed explanaon for users on how to congure

Router AP mode.

Log into the sengs page, go to system and select “Operang Mode”

Choose Router AP Mode and click save & reboot. The device will now reboot. Aer the device has nished

reboong, you will have to make change See below. s to your computer’s physical connecon.

The physical setup is slightly dierent than the standard setup. Plug your computer into LAN2 on the access point.

Plug your ISP’s modem into the PoE ‘10/100 data in’ port.

Now, open your browser and go to 192.168.2.254. It should take you back into the sengs page. Go to system

and select “Setup Wizard”. Click “Next”

3-1- Internet Connecon Type 1

Choose your mode. Most ISPs use “Dynamic IP”. If you are unsure, please contact your ISP. Refer to

Secon 4-1

for a more in-depth explanaon of these sengs.

3-1- DNS 2

Choose your DNS type. By default, it will be received automacally but if you have a preferred DNS or you have to

specify one, please choose “specify” and enter in your values.

3-1- LAN setup 3

You can change the default IP of the device here if required. By default, the IP is 192.168.2.254

3-1- DHCP Server 4

In router mode, by default, IP addresses will be assigned to any LAN/WLAN clients that are connected to the

device. You can disable this feature. By default, DHCP is enabled and the IP range is 192.168.2.10 192.168.2.70 –

3-1- Wireless Setup 5

This page is used to dene the parameters for the wireless LAN clients

Channel Bandwidth: Set channel width of wireless radio. Do not modify the default value if you do not

understand the funcon, default seng is ‘20/40 MHz’

Extension Channel: Only for Channel Bandwidth 20/40. Select the desired channel bonding for control

ESSID: This is the wireless broadcast name. By default, it is ‘Hawking_Outdoor’ but you can

change it to whatever you want.

3-1- Wireless Security 6

This page allows you to set up wireless security to prevent any unauthorized access to your wireless network.

Next to security type, choose your type of security (Hawking recommends WPA-2PSK)

3-1-6- Disable wireless security1

When you select this mode, data encrypon is disabled, and every wireless device in proximity will be able to

connect your wireless access point if no other security measure is enabled

Use this opon only when you want to allow any user to use your wireless access point, and you are not

concerned about unauthorized access to your les and/or transfers over your network.

3-1-6- WEP - Wired Equivalent Privacy2

When you select this mode, the wireless access point will use WEP encrypon, and the following setup menu will

be shown on your web browser:

Cipher Suite: AES Advanced Encrypon Standard is short for , The AES cipher is specied as a number

of repeons of transformaon rounds that convert the input plain text into the nal

output of ciphertext. Each round consists of several processing steps, including one that

depends on the encrypon key. A set of reverse rounds are applied to transform

ciphertext back into the original plaintext using the same encrypon key. is short TKIP

for , TKIP scrambles the keys using a hashing algorithm Temporal Key Integrity Protocol

and, by adding an integrity-checking feature, ensures that the keys haven’t been

tampered with.

Key Type Select the type of pre-shared key, you can select ASCII (8 or more alphanumerical

characters, up to 63), or Hex (64 characters of 0-9, and a-f).

Pre-shared Enter the informaon for pre-shared key; the format of the informaon shall according

to the key type selected. Pre-shared key can be either entered as a 256-bit secret in 64

HEX digits format, or 8 to 63 ASCII characters

Hawking recommends using WPA2-PSK w/ AES cipher suite as your default level of security.

Click Finish and the device will automacally restart and save your sengs. Aer you have nished, you can

connect the device to your network via LAN2 to use this as a Router AP. You can add a network switch to LAN2 if

you need more Ethernet ports. Please change your computer IP address back to “Obtain an IP automacally”.

3- AP Mode Setup2

When AP mode is chosen, the system can be congured as a standard wireless access point. In this mode, the

device can be used as an Access Point for wireless client connecon. All Ethernet ports wand wireless interfaces

are bridged together. This secon provides a detailed explanaon for users on how to congure AP mode.

Log into the set ngs page, go to system and select “Operang Mode”

Choose AP Mode and click save & reboot. The device will now reboot.

Now, open your browser and go to 192.168.2.254. It should take you back into the sengs page. Go to system

and select “Setup Wizard”. Click “Next”

3-2- LAN setup 1

You can change the default IP of the device here if required. By default, the IP is 192.168.2.254

3-2- DNS 2

Choose your DNS type. By default, it will be received automacally but if you have a preferred DNS or you have to

specify one, please choose “specify” and enter in your values.

3-2- Wireless Setup 3

This page is used to dene the parameters for the wireless LAN clients

Band: Please select the wireless band you wish to use. By selecng dierent band seng, you’ll

be able to allow or deny the wireless client of a certain band.

If you select 802.11b only wireless clients using the wireless band you select 802.11b will

be able to connect to this access point. ( Maximum transfer rate 11Mbps)

If you select 802.11b/g, then only wireless clients using 802.11b and 802.11g band will

be able to connect to this access point. (Maximum transfer rate 11Mbps for 802.11b

clients, and maximum 54Mbps for 802.11g clients)

If you want to allow 802.11b, 802.11g, and 802.11n clients to connect to this access

point, select 802.11b/g/n (Maximum transfer rate 11Mbps for 802.11b clients,

maximum 54Mbps for 802.11g clients, and maximum 300Mbps for 802.11n clients)

(Default).

If you select 802.11n, the only wireless clients using 802.11n band will be able to connect

to this access point. (M aximum 300Mbps for 802.11n clients)

Country: This device only supports United States WiFi channels.

Channel: Please select a channel from the dropdown list of ‘Channel Number’, You can choose any

channel number you want to use, and almost all wireless clients can locate the channel

you’re using automacally without any problem. However, it’s sll useful to remember

the channel number you use, as some wireless clients support manual channel number

selecng, and this would help in certain scenarios when there are radio communicaon

conicts

By default, it is on AUTO but if you have a specic channel you wish to use, you can

select it here.

Tx Power: You can adjust the output power of the access point to get the appropriate coverage for

your wireless network. Specify power levels between level 1 and level 9. Level 9 is the

maximum seng.

Channel Bandwidth: Set channel width of wireless radio. Do not modify the default value if you do not

understand the funcon, default seng is ‘20/40 MHz’

Extension Channel: Only for Channel Bandwidth 20/40. Select the desired channel bonding for control

ESSID: This is the wireless broadcast name. By default, it is ‘Hawking_Outdoor’ but you can

change it to whatever you want.

3-2- Wireless Security 4

This page allows you to set up wireless security to prevent any unauthorized access to your wireless network.

Next to security type, choose your type of security (Hawking recommends WPA-2PSK)

3-2-4- Disable wireless security1

When you select this mode, data encryption is disabled, and every wireless device in proximity will be able to

connect your wireless access point if no other security measure is enabled

Use this option only when you want to allow any user to use your wireless access point, and you are not

concerned about unauthorized access to your files and/or transfers over your network.

3-2-4- WEP - Wired Equivalent Privacy2

When you select this mode, the wireless access point will use WEP encryption, and the following setup menu will

be shown on your web browser:

Key Length: There are two types of WEP key length: 64-bit and 128- -bit. Using ‘128 bit’ is safer than

’ bit’, but will reduce some data transfer performance.64-

WEP Auth Method: Open system - there is no authencaon to access AP or wireless NIC

Shared - only those with the same key with the AP can connect to it.

Key Index: You can set up to four sets of WEP key, and you can decide which key is being used by

default here. If you don’t know which one you should use, select ‘Key 1’.

WEP Key 1- 4: You can chose either HEX or ASCII for your WEP key value, for 64bit encrypon strength

can use 10 digits for HEX (0~9, a~f and A-F) or 5 digits for ASCII (0~9, a~z and A~Z), for

128bit encrypon strength can use 26 digits for HEX (0~9, a~f and A-F) or 13 digits for

ASCII (0~9, a~z and A~Z), for 152bit encrypon strength can use 32 digits for HEX (0~9,

a~f and A- or 16 digits for ASCII (0~9, a~z and A~Z) F)

3-2-4- -Fi Protected Access (WPA-PSK or WPA2-PSK):3 Wi

When you select this mode, the wireless access point will use WPA encryption, and the following setup menu will

be shown on your web browser:

Cipher Suite: AES Advanced Encryption Standard is short for , The AES cipher is specified as a number

of repetitions of transformation rounds that convert the input plain text into the final

output of ciphertext. Each round consists of several processing steps, including one that

depends on the encryption key. A set of reverse rounds are applied to transform

ciphertext back into the original plaintext using the same encryption key. is short TKIP

for , TKIP scrambles the keys using a hashing algorithm Temporal Key Integrity Protocol

and, by adding an integrity-checking feature, ensures that the keys haven’t been

tampered with.

Key Type Select the type of pre-shared key, you can select ASCII (8 or more alphanumerical

characters, up to 63), or Hex (64 characters of 0-9, and a-f).

Pre-shared Enter the information for pre-shared key; the format of the information shall according

to the key type selected. Pre-shared key can be either entered as a 256-bit secret in 64

HEX digits format, or 8 to 63 ASCII characters

Hawking recommends using WPA2-PSK w/ AES cipher suite as your default level of security.

Click Finish and the device will automatically restart and save your settings. After you have finished, you can

connect the device to your network via the 10/100 Data IN port on the PoE adapter or the LAN2 port to add this

access point to your network. Please change your computer IP address back to “Obtain an IP automatically”.

3- WDS Mode Setup3

When WDS mode is chosen, the system can be configured in WDS Mode. In this mode, WDS (Wireless Distribution

Service, creates a wireless backbone link between multiple access points that are part of the same wireless

network. This allows a wireless network to be expanded using multiple access points without the need for a wired

backbone to link them. We can only guarantee WDS will only work with the HPOW5 and the HPOW10D devices.

Do not use other devices to set up a WDS network. This section provides a detailed explanation for users on how

to configure this mode.

Log into the settings page, go to system and select “Operating Mode”

Choose WDS Mode and click save & reboot. The device will now reboot.

Now, open your browser and go to 192.168.2.254. It should take you back into the settings page. Go to system

and select “Setup Wizard”. Click “Next”

3-3- LAN Setup 1

You can change the default IP of the device here if required. By default, the IP is 192.168.2.254. Note: The IP

address of each remote WDS peer must be unique.

3-3- DNS 2

Choose your DNS type. By default, it will be received automatically but if you have a preferred DNS or you have to

specify one, please choose “specify” and enter in your values.

3-3- Wireless Setup 3

This page is used to define the parameters for the wireless LAN clients. These settings should match the remote

WDS peer devices

Band: Please select the wireless band you wish to use. By selecting different band setting, you’ll

be able to allow or deny the wireless client of a certain band.

If you select 802.11b only wireless clients using the wireless band you select 802.11b will

be able to connect to this access point. ( Maximum transfer rate 11Mbps)

If you select 802.11b/g, then only wireless clients using 802.11b and 802.11g band will

be able to connect to this access point. (Maximum transfer rate 11Mbps for 802.11b

clients, and maximum 54Mbps for 802.11g clients)

If you want to allow 802.11b, 802.11g, and 802.11n clients to connect to this access

point, select 802.11b/g/n (Maximum transfer rate 11Mbps for 802.11b clients,

maximum 54Mbps for 802.11g clients, and maximum 300Mbps for 802.11n clients)

(Default).

If you select 802.11n, the only wireless clients using 802.11n band will be able to connect

to this access point. (M aximum 300Mbps for 802.11n clients)

Country: This device only supports United States WiFi channels.

Channel: Please select a channel from the dropdown list of ‘Channel Number’, You can choose any

channel number you want to use, and almost all wireless clients can locate the channel

you’re using automatically without any problem. However, it’s still useful to remember

the channel number you use, as some wireless clients support manual channel number

selecting, and this would help in certain scenarios when there are radio communication

conflicts

By default, it is on AUTO but if you have a specific channel you wish to use, you can

select it here.

Tx Power: You can adjust the output power of the access point to get the appropriate coverage for

your wireless network. Specify power levels between level 1 and level 9. Level 9 is the

maximum setting.

Channel Bandwidth: Set channel width of wireless radio. Do not modify the default value if you do not

understand the function, default setting is ‘20/40 MHz’

Extension Channel: Only for Channel Bandwidth 20/40. Select the desired channel bonding for control

ESSID: This is the wireless broadcast name. By default, it is ‘Hawking_Outdoor’ but you can

change it to whatever you want.

3-3- WDS Setup/Wireless Security 4

3-3-4- WDS Setup1

This page allows you to setup the WDS Link. Enter the Remote WDS peer’s MAC Address and select an appropriate

security type for WDS Link. Note that the remote WDS peer should also be using this device’s MAC address.

Reference Status, Overview to get the wireless MAC Address.

Service: Enable/disable to turn on/off WDS mode

WDS Peer’s MAC Address: Enter the MAC address of the WDS Peer (aa.bb.cc.dd.ee.ff)

3-3-4- Wireless Security2

This page allows you to set up wireless security to prevent any unauthorized access to your wireless network.

Next to security type, choose your type of security (Hawking recommends WPA-2PSK)

3-3-4-2- Disable wireless security 1

When you select this mode, data encrypon is disabled, and every wireless device in proximity will be able to

connect your wireless access point if no other security measure is enabled

Use this opon only when you want to allow any user to use your wireless access point, and you are not

concerned about unauthorized access to your les and/or transfers over your network.

3-3-4-2- WEP - Wired Equivalent Privacy 2

When you select this mode, the wireless access point will use WEP encrypon, and the following setup menu will

be shown on your web browser:

Key Length: There are two types of WEP key length: 64-bit and 128- -bit. Using ‘128 bit’ is safer than

’64 bit’, but will reduce some data transfer performance.-

WEP Auth Method: Open system - there is no authencaon to access AP or wireless NIC

Shared - only those with the same key with the AP can connect to it.

Key Index: You can set up to four sets of WEP key, and you can decide which key is being used by

default here. If you don’t know which one you should use, select ‘Key 1’.

WEP Key 1- 4: You can chose either HEX or ASCII for your WEP key value, for 64bit encrypon strength

can use 10 digits for HEX (0~9, a~f and A-F) or 5 digits for ASCII (0~9, a~z and A~Z), for

128bit encrypon strength can use 26 digits for HEX (0~9, a~f and A-F) or 13 digits for

ASCII (0~9, a~z and A~Z), for 152bit encrypon strength can use 32 digits for HEX (0~9,

a~f and A-F) or 16 digits for ASCII (0~9, a~z and A~Z)

3-3-4-2- AES3

When you select this mode, the wireless access point will use WPA encrypon, and the following setup menu will

be shown on your web browser:

AES Advanced Encrypon Standard is short for , The AES cipher is specied as a number of repeons of

transformaon rounds that convert the input plain text into the nal output of ciphertext. Each round consists of

several processing steps, including one that depends on the encrypon key. A set of reverse rounds are applied to

transform ciphertext back into the original plaintext using the same encrypon key.

AES Key Enter the informaon for pre-shared key; the format of the informaon shall according

to the key type selected. Pre-shared key can be either entered as a 256-bit secret in 64

HEX digits format, or 8 to 63 ASCII characters

Click Finish and the device will automacally restart and save your sengs. Aer you have nished, at least one of

the WDS devices must be connect to your network via the 10/100 Data In port on the PoE adapter or the LAN2 ed

port to add this WDS device to your network. The other WDS peers just need to be powered on via the P-Data Out

port on the PoE adapter and can be stand alone. Please change your computer IP address back to “Obtain an IP

automacally”.

3- Client Bridge + Repeater AP Mode4

When Client Bridge + Repeater AP Mode is chosen, the system can be congured in bridged mode. In this mode,

the device can connect to other Access Points via a wireless link and be used to bridge wired clients to the

network. It can also act as a wireless repeater. All Ethernet ports and repeater access points are bridged together.

This secon provides a detailed explanaon for users on how to congure this mode.

Log into the sengs page, go to system and select “Operang Mode”

Choose Client Bridge + Repeater AP Mode and click save & reboot. The device will now reboot.

Now, open your browser and go to 192.168.2.254. It should take you back into the sengs page. Go to system

and select “Setup Wizard”. Click “Next”

3-4- LAN setup 1

You can change the default IP of the device here if required. By default, the IP is 192.168.2.254

3-4- DNS 2

Choose your DNS type. By default, it will be received automacally but if you have a preferred DNS or you have to

specify one, please choose “specify” and enter in your values.

3-4- DHCP Server 3

In router mode, by default, IP addresses will be assigned to any LAN/WLAN clients that are connected to the

device. You can disable this feature. By default, DHCP is enabled and the IP range is 192.168.2.10 192.168.2.70. –

If you want to use this device as a simple client bridge and/or a standard wireless repeater, you should disable this

service.

3-4- Wireless Staon Setup 4

This page allows you to search for an available Access Point to Connect

Staon ESSID: Wireless Name of the network you wish to connect to. You can manually enter the name

or click on “Site Survey” for the device to scan for wireless networks.

Site Survey: Press this buon for the device to automacally scan for wireless networks

3-4-5- Disable wireless security1

This means the network you are choosing has no security enabled at all. If you are unsure what kind of security the

remote network is using, please contact the site administrator since this is unique to that network.

3-4-5- WEP - Wired Equivalent Privacy (Open/Shared)2

When you select this mode, the wireless access point you are connecng to is using WEP encrypon. If you are

unsure what kind of security the remote network is using, please contact the site administrator since this is unique

to that network.