Harvia Xenio CX004WIFI Bedienungsanleitung

Harvia Nicht kategorisiert Xenio CX004WIFI

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Harvia Xenio CX004WIFI (36 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/36
Harvia Xenio WiFi
CX004WIFI
14122021 / Y05-0954
EN Instructions for Installation and Use of Control Panel
FR Instructions d’installation et d’utilisation du
panneau de commande
CX004WIFI
2
READ THE WARNINGS AND MANUAL CAREFULLY BEFORE USING
THE PRODUCT!
The sauna heater is designed for the heating of a sauna room to bathing
temperature. It is not to be used for any other purpose!
The control unit is meant for controlling the functions of sauna and a sauna
heater. It is not to be used for any other purpose!
This device is allowed to use by 8 years old or older children and persons with reduced
physical, sensory or mental capabilities, or persons with lack of experience and
knowledge, if they are supervised or they have been instructed to use the device safely
and if they are aware of the dangers involved. Children should not play with the device.
Children should not clean or do operations to the device without supervision.
INSTALLATION AND MAINTENANCE
The electrical device may only be connected to the electrical network in
accordance with the current regulations by an authorised, professional
electrician. After completing the installation, the person in charge of the
installation should give these instructions to the owner of the sauna or to the
person in charge of its operation.
All maintenance that requires special skills must be performed by a trained
professional.
Always disconnect the device from the electricity network before carrying out
any maintenance work!
• Check the device for visible damage before installing and using the device. Do not use a
damaged device.
• It is absolutely necessary to install the device according to values stated in the
instructions of installation and use. Neglecting them causes a risk of re.
• If suitable accessories are installed in the device, follow the accessory-specific operating
and installation instructions!
• Clean the product by using a lightly moistened cloth. Use only mild cleaning agents, never
solvents or corrosive chemicals.
• This product should not be disposed of with general household waste. When recycling your
product, take it to your local collection facility or contact the place of purchase.
EN WARNINGS AND NOTES
This user manual is intended for the owner or the person in charge of the
product, as well as for the electrician in charge of the electrical installation of the
product. After completing the installation, the person in charge of the installation
should give these instructions to the owner of the product or to the person in
charge of its operation. Please read more instructions for installation, use and
recycling from www.harvia.com. (Original user manual from manufacturer).
3
• The device must be installed in such a way that the warning texts are easy to read
after installation.
• The device must not be installed in a wall recess, unless otherwise stated in the
instructions.
• Do not place the supply air vent so that the air flow cools the temperature sensor (see
temperature sensor installation instructions!)
• If the supply cord is damaged, it must be replaced by the manufacturers’ service person
or a similarly qualied person in order to avoid a hazard.
• Use of a PVC-insulated cable as a connection cable for the heater is prohibited due to
its thermal fragility.
• Do not connect power supply to electric heater via a residual current device.
• If device is connected to water supply, there must be a floor drain on the floor of the
sauna room and/or washroom in case of hose breaks or leaks.
• If device is used in public saunas without a timer, the indicator light, which tells if the
device is on, must be placed in the room where the device is controlled.
INSTRUCTIONS FOR USE AND BATHING
Always check that there are no objects on the heater or near the heater before
switching it on.
Beware of hot heater. The stones and metal parts of the heater may burn the
skin.
Do not cover!
• Sea air and a humid climate may corrode the metal surfaces of the device.
• Do not hang clothes to dry in the sauna, as this may cause a risk of fire. Excessive moisture
content may also cause damage to the electrical equipment.
• Do not press the overheating protection button before the cause of the fault has
been found. Only persons authorised to carry out electrical installations can reset the
overheat protector, unless otherwise stated in the instructions manual.
• Always check that the heater has switched off and stopped heating after the on-time
period has elapsed.
• In public saunas, where the heater is used without a timer or continuously for longer
than the timer of the heater or the control unit allows with the factory settings, the
device must be constantly supervised.
• The sauna room and surroundings of the heater must always be checked before the
heater is switched on again or it is switched on with the remote-control system.
• The sauna room and surroundings of the heater must always be checked before
the device is brought into standby mode required by remote control or pre-timed
operation.


Produktspezifikationen

Marke: Harvia
Kategorie: Nicht kategorisiert
Modell: Xenio CX004WIFI

Brauchst du Hilfe?

Wenn Sie Hilfe mit Harvia Xenio CX004WIFI benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Harvia

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-