Harman Kardon HKTS 65 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Harman Kardon HKTS 65 (12 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĂĽr 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
HKTS 65BQ
Home theater speaker system
Owner’s Manual
HKTS 65BQ
2
Introduction, Description and Features,
and Included Items
Introduction
Thank you for purchasing the Harman Kardon® HKTS 65 speaker system, with which
you’re about to begin many years of listening enjoyment. The HKTS 65 has been custom
designed to provide all the excitement and power of the cinema experience in your own
living room.
While sophisticated electronics and state-of-the-art speaker components are hard at
work within the HKTS 65, hookup and operation are easy, thanks to simple controls and
color-keyed cables and connections.
To obtain maximum enjoyment from your new home theater speaker system, we urge you
to take a few minutes to read through this manual. It will help ensure that the connections
you make to your receiver (or preamp/processor), ampliî…°er and other devices are correct.
In addition, a few minutes spent learning the functions of the various controls will enable
you to take advantage of all the power and reî…°nement the HKTS 65 is able to deliver.
If you have any questions about this product, its installation or its operation, please
contact your dealer. He or she is your best local source of information.
Description and Features
The HKTS 65 is a complete six-piece home theater speaker system that includes:
• A 200-watt wireless powered subwoofer with an 8-inch (200mm) low-frequency
transducer
• Four identical, two-way, video-shielded, dual at-panel midrange satellite speakers
for the front left and right, and surround left and right speaker positions
• A dedicated, voice-matched, video-shielded, dual at-panel midrange center speaker
• Removable bases for the satellite speakers and wall-mount brackets for the satellite
and center speakers
• All of the cables you need to connect all of the speakers to your receiver or preamp/
processor and ampliî…°er
The speaker cables all use a color-coding system to conform to the Consumer Electronics
Association (CEA®) standard. This color-coding system minimizes confusion when
connecting the speakers, especially when you are connecting them to a Harman Kardon
receiver.
We have equipped the HKTS 220SUB wireless subwoofer and transmitter with Wireless
Code switches that allow the subwoofer to avoid interference from other wireless devices
while it’s operating wirelessly. Other conveniences include a level control, a phase switch
for î…°ne-tuning bass response to suit your listening environment and taste, and an
efî…°cient switching system that senses the presence of an audio signal and automatically
switches the subwoofer from standby mode to on.
We have included wall-mount brackets for the satellite and center speakers and shelf
stands for the satellite speakers. Optional HKFS 3 î…±oor stands are available separately
from your Harman Kardon dealer.
Harman Kardon engineers invented the high-î…°delity receiver over î…°fty years ago. With
state-of-the-art features and time honored circuit designs, the HKTS 65 is a perfect
complement to a Harman Kardon receiver or any home theater system.
Included Items
SAT-TS60 Satellite
speakers x 4
CEN-TS60 Center
speaker x 1
Satellite wall-mount
bracket x 4
Center speaker wall-mount
bracket x 1
Bracket stop
plate x 4
16.5-foot (5m)
speaker cables x 2
32.8-foot (10m)
speaker cables x 2
13.1-foot (4m)
speaker cable x 1
HKTS 220SUB wireless
subwoofer x 1
Subwoofer wireless
transmitter x 1
Wireless transmitter
power supply x 1
Transmitter power
supply AC cord x 1
(varies with region)
LFE cable x 1
Trigger cable x 1
3
HKTS 65BQ
Subwoofer Rear-Panel Controls and Connections
Subwoofer Rear-Panel Controls and Connections
Subwoofer Unit
Phase switch: This switch determines whether the subwoofer transducer’s piston-like
action moves in and out in phase with the satellite speakers. If the subwoofer were to
play out of phase with the satellite speakers, the sound waves from the satellites could
cancel out some of the subwoofer’s sound waves, reducing bass performance and sonic
impact. This phenomenon depends in part on the placement of all the speakers in the
room. In most cases, the Phase switch should be left in the “Normal” position. However,
it does no harm to experiment, and you can leave the Phase switch in the position that
maximizes bass response and impact.
Bass Boost switch: Set this switch to “On” to enhance the subwoofer’s low-frequency
performance. Set this switch to “Off” for normal low-frequency performance.
Power On Mode switch: When this switch is set in the “Auto” position and when the
Power switch is set to “On,” the subwoofer will automatically turn itself on when it
receives an audio signal and will enter the standby mode after it has received no audio
signal for about 15 minutes. When this switch is set in the “On” position, the subwoofer
will remain on whether or not it is receiving an audio signal. An LED on the subwoofer’s
top panel indicates whether the subwoofer is in the on or standby state:
• When the LED glows white, the subwoofer is turned on.
• When the LED is not illuminated, the subwoofer is in the standby mode. When the
Power switch is set to “Off,” the LED will not be illuminated, no matter what setting
the Power On Mode switch is in.
Subwoofer Level control: Use this control to adjust the subwoofer’s volume. Turn
clockwise to increase the volume; turn counterclockwise to decrease the volume.
Input Mode switch: When this switch is in the “Normal” setting, the input signal from
the Line-Level L/R In connectors is active. When this switch is in the “LFE” setting, the
input signal from the Line-Level LFE In connector is active.
External Trigger Input connector: Use the supplied trigger cable to connect the External
Trigger Input connector to the trigger output of another compatible component. Whenever
the subwoofer detects a trigger signal between 3V and 30V (AC or DC), its ampliî…°er will
turn on. The ampliî…°er will turn off after the trigger signal ceases, even when the Power
On Mode switch is in the “Auto” position.
Line-Level LFE In connector: The signal from this connector bypasses the subwoofer’s
internal low-pass crossover. When you’re connecting the subwoofer to the dedicated
subwoofer output of a receiver/processor that has its own low-pass crossover network,
use the Line-Level LFE In connector. You must also set the subwoofer’s Input Mode
switch in the “LFE” position.
Line-Level L/R In connectors: The signals from these connectors pass through the
subwoofer’s internal low-pass crossover. When you’re connecting the subwoofer to
the preamp or subwoofer outputs of a receiver/processor that does not have its own
low-pass crossover network, use both Line-Level L/R In connectors. You must also set
the Input Mode switch in the “Normal” position. If your receiver/processor has only one
subwoofer output, you can use either the L or R connector.
Wireless Code switch: This switch selects between four different channels for the
wireless subwoofer signal.
IMPORTANT: Be sure to set the subwoofer’s Wireless Code switch to the same channel
that you set the transmitter module’s Wireless Code switch. See Wireless Code Settings,
on page 10, for more information.
Power switch: Set this switch in the “On” position to turn the subwoofer on. The
subwoofer will then be either on or in the standby mode, depending on the setting of the
Power On Mode switch.
Power Cord (non-detachable): After you have made and veriî…°ed all the connections
described in this manual, plug this cord into an active, unswitched electrical outlet for
proper operation of the subwoofer. DO NOT plug this cord into the accessory outlets
found in some audio components.
Phase Switch
Bass Boost Switch
Power On Mode Switch
Subwoofer Level Control
Input Mode Switch
External Trigger Input
Line-Level LFE In Connector
Line-Level L/R In Connectors
Wireless Code Switch
Power Switch Power Cord


Produktspezifikationen

Marke: Harman Kardon
Kategorie: Lautsprecher
Modell: HKTS 65

Brauchst du Hilfe?

Wenn Sie Hilfe mit Harman Kardon HKTS 65 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Harman Kardon

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĂĽr -Kategorien-