Harley-Davidson J01186 (2001) Bedienungsanleitung

Harley-Davidson Motorrad J01186 (2001)

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Harley-Davidson J01186 (2001) (1 Seiten) in der Kategorie Motorrad. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
INSTRUCTIONS
-J01186 REV. 2-23-01
SCREAMIN’ EAGLE ROLLER ROCKER ARM KIT
General
These roller rocker arms are designed to fit 1984 and later
1340 Evolution Big Twins, 1986 and later 883 and 1200
Evolution XL and 1999 and later Twin Cam 88 Engines.
Kit contents:
Description Part No.
Roller rocker arms (2) 17376-98
(front-intake, rear-exhaust)
Roller rocker arms (2) 17377-98
(rear-intake, front-exhaust
Installation NOTE
A Service Manual for your motorcycle is available from your
Harley-Davidson Dealer.
A Service Manual is needed to install this kit. The rider's
safety depends upon the correct installation of this kit. If
the procedure is not within your capabilities or you do
not have the correct tools, have your Harley-Davidson
dealer perform the installation. Improper installation of
this kit could result in death or serious injury.
1. Remove existing rocker arms per applicable Service
Manual instructions.
2. Install new roller rocker arms per applicable Service
Manual. The new rocker arms install the same as
original equipment rocker arms.
NOTE
To avoid possible interference between the pushrods and
upper pushrod covers, shifting the rocker arm supports
toward the engine’s cam side may be required. To check the
clearance between the pushrods and covers, rotate the
engine so that the cylinder you are checking has both values
in the closed position.
NOTE
See Figure 1. On Twin Cam 88 Engines clearance between
the top rocker covers and the roller rocker arms must be a
minimum of .060 inches. It may be necessary to remove
some of the rib material inside the rocker covers to achieve
the required clearance.
1CAUTION
®
Kit Number 17378-98
i01665
Check these locations to see that
they meet the required clearance.
Figure 1. Twin Cam 88 Engine Clearance


Produktspezifikationen

Marke: Harley-Davidson
Kategorie: Motorrad
Modell: J01186 (2001)

Brauchst du Hilfe?

Wenn Sie Hilfe mit Harley-Davidson J01186 (2001) benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten