Hager EE002 Bedienungsanleitung

Hager Schalten EE002

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hager EE002 (2 Seiten) in der Kategorie Schalten. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
5.48 General Catalogue • Modular Devices • Technical
Light Sensitive Switches
Light Sensitive Switches
Using light sensitive switches can prevent the unnecessary use of
lighting circuits where suf cient daylight exists. The bene t of  
modular devices is the facility to set the ambient lighting level at
which the device will operate, and as the device is tted at the
distribution point prevent unauthorised tampering. The remote pho-
tocell unit can be mounted up to a distance of 50 metres from the
device. Two devices are available the standard EEN100 light sensitive
switch and an enhanced programmable version the EE171 that also
allows time clock control.
Principle of Operation
Both devices control lighting systems according to natural
illumination;
• The user sets the working level:
• The photo cell measures the external light level
The output of the EEN100 is:
• ON, when the measured level is lower than the pre-set
light level
• OFF, when the measured level is higher than the pre-set
light level
The output of the EE171 during the programmed ON time period is:
• ON, when the measured level is lower than the pre-set
light level
• OFF, when the measured level is higher than the pre-set
light level
The output of the EE171 during the programmed off time period is:
• OFF, regardless of the lighting level
The light sensitive switches include a built in time delay which avoids
unnecessary switching due to temporary factors such as car
headlight beams etc...
Description
The programmable light sensitive switch EE171 has two main
functions:
• Light sensitive switch comprising
1 Override selector switch to allow permanent ON or OFF, auto or
test mode
2 Lighting range selector
3 Potentiometer to set light level
4 Indicator to show output switching status
• A programmer to establish the automatic operating cycle
The programmer comprises 4 keys:
5 to choose whether the circuit is on or off.ON / OFF
6 to set the program and scroll program stepsProg
7 Reset
8 and to change settings+ -
Lux
T
6:00 8:00 17:00 23:00
ON ON
OFF OFF OFF
11
10
12
N
5
1 2
L
6
6E0585a
230 V 50 Hz
μ 16A 250V
10 11 12
AC1
test
aut o
2000
50
Lux
100
5
127 8 9 10 11
61 2 3 4 5
127 8 9 10 11
61 2 3 4 5
on/off Prog
+
3
4
2
1
3
4
2
1
6
5
7
8
L
N
10 1211
5 61 2
5.49
Sales Service Centre • 01952 675612 Technical Support Helpline • 01952 675689
Light Sensitive Switches continued.
Mounting the Cell
To ensure correct operation of the light sensitive switch, the cell must
not be in uenced by arti cial light or direct solar radiation and should  
be sheltered from dust and humidity. In case of disconnection of the
link between the cell and the light sensitive switch, the output of the
device will be switched on. Make sure the light sensitive switch is
unplugged before connecting the cell.
EE002 EE003
Type Flush Mounting Surface Mounting
Dimensions (mm) 89 x 48 x 32 25 x 25 x 20
Hole 25mm
Connection Cable 1m 2 x 0.75mm20.75 to 4mm2
Protection Class IP54 IP54
Working &
Storage
Temperature
-30ºC to +60ºC -30ºC to +60ºC
Adjustment of the Working Level
The test position of the override selector 1 makes setting the
preset level easier by removing the ON and OFF delay.
Select the sensitivity range which suits your application (selector 1)
5 to 100 lux (low light level) application examples; public lighting,
shop windows, signals...
50 to 2000 lux (high light level) application examples; controls of
shades
At the appropriate moment of the day, put the selector 1 in test
position; turn the potentiometer 2 up to the switching point (the
indicator 4 lights); put the selector back to position ‘auto’ the normal
operating mode of the device.
Technical Specification
Electrical Specification
Voltage Rating 230V +10 -15% 50Hz
Consumption 1.5VA Max
Output 1 Voltage Free Changeover
Contact
Max Breaking Capacity AC1 16A 250V~
Incandescent Lamp 2000W 230V~
Halogen Lamp 1000W 230V~
Fluorescent Lamp
Uncompensated
1000W 230V~
Compensated in Series (10µF) 1000W 230V~
// Compensated (15µF) 200W 230V~
Duo 1000W 230V~
Functional Characteristics
Sensitivity Range 5 to 100 lux, 50 to 2000 lux
Cycle Weekly
Programs 8 Pre-de ned Program
Program Setting 1 Minute Increments*
Accuracy +6min / annum*
Operating Reserve Lithium Battery Total of 3 Years
Supply Failure*
On and Off Delay 15 to 60s
Working Temperature -30ºC to +60ºC (cell)
-10ºC to +50ºC (modular device)
Storage Temperature -20ºC to +60ºC
Protection Class (cell) IP54
Insulation Class II
Connection Capacity
Modular Device 0.5 to 4mm2
Cell 0.75 to 2.5mm2
Max Length between Cell and
Modular Device
50m
Mounting of the Cell with 2
Screws
2.5mm
* EE171 only
Modular
Devices


Produktspezifikationen

Marke: Hager
Kategorie: Schalten
Modell: EE002

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hager EE002 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schalten Hager

Bedienungsanleitung Schalten

Neueste Bedienungsanleitung für -Kategorien-