Graupner MICRO MAGIC 2014 Bedienungsanleitung

Graupner Diversen MICRO MAGIC 2014

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Graupner MICRO MAGIC 2014 (15 Seiten) in der Kategorie Diversen. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/15

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY

#0057088

Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! No liability for printing errors. We reserve the right to introduce

modifications. Sous réserve de modifications! Nous ne sommes pas responsables d’éventuelles erreurs d’impression! 11/2006

Building instructions for the racing MICRO MAGIC model boat, Order No. 2014

Description of the model

The racing MICRO MAGIC has been developed to reflect progress in the MICRO MAGIC regatta scene. In its

standard form the boat represents a modified version of the original model designed for the ambitious regatta

skipper; it is intended to complement the earlier MICRO MAGIC, which has proved to be very popular. The

racing MICRO MAGIC includes a carbon fibre rig with a slim 5 mm Ø mast, improved sails and a completely

new set of high-quality plastic fittings. A new feature - unprecedented in a kit model - is the variable-position

keel (fore-and-aft direction), which enables the operator to adjust the model very quickly to suit varying sailing

conditions, and to satisfy the operator’s personal preferences. The revised keel fin and rudder are of slightly

reduced area and thinner profiles in order to reduce water resistance. The slightly heavier ballast bulb is also

longer, resulting in enhanced directional stability. The boat is designed for an RC system consisting of fairly

small, lightweight components, and the internal arrangement has been optimised with such a system in mind.

An additional micro-servo can also be fitted to provide jib sheet trim control from the transmitter, so that the sail

trim can be fine-tuned while the boat is on the water. The sail adjustment system has been designed for

reduced friction, with a double control arm and return pulleys, with the result that a lighter servo can also be

employed safely.

The shape of the bow and stern have been re-worked slightly to give the boat a more modern appearance, but

the basic lines of the original hull have been left unchanged in order to stay within the German class rules.

Specification

Overall length approx. 535 mm

Beam approx. 180 mm

Overall height approx. 980 mm

All-up weight approx. 850 g

Sail area approx. 1450 cm²

Important safety notes

You have purchased a kit which can be assembled to produce a fully working RC model when fitted out with

the appropriate accessories. As manufacturers, we at GRAUPNER are not in a position to influence the way

you install, operate and maintain the model, nor the other components used in connection with the model. For

this reason we are obliged to deny all liability for loss, damage or costs which are incurred due to the

incompetent or incorrect use and operation of our products, or which are connected with such operation in any

way. Unless otherwise prescribed by binding law, the obligation of the GRAUPNER company to pay

compensation, regardless of the legal argument employed, is excluded. This includes personal injury, death,

damage to buildings, loss of trade or turnover, interruption of business or other indirect or direct damages which

are caused by the operation of the model.

Under all circumstances and in all cases the company’s overall liability is limited to the amount which you

actually paid for this model.

The model is operated at the sole risk of the operator. To avoid injury to persons and damage to

property please handle your model boat carefully and operate it conscientiously at all times.

Before you run the boat for the first time it is important to check that your private third party insurance policy

provides cover when you are operating model boats of this kind. If you are not sure, take out a special

insurance policy designed to cover the risks of RC modelling.

These safety notes are important, and must be kept in a safe place. If you ever dispose of the model, be sure to

pass them on to the new owner.

Guarantee conditions

The guarantee covers replacement of any parts which can be shown to exhibit manufacturing faults or material

defects within the guarantee period of 24 months from the initial date of purchase. No other claims will be

considered. Cost of transport, packing and freight are payable by the purchaser. We accept no liability for

damage in transit. When you send the product to GRAUPNER, or to the approved Service Centre for your

country, you must include a clear and concise description of the fault together with the invoice showing the date

of purchase. The guarantee is invalid if the component or model fails due to an accident, incompetent handling

or incorrect usage.

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY

#0057088

Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! No liability for printing errors. We reserve the right to introduce

modifications. Sous réserve de modifications! Nous ne sommes pas responsables d’éventuelles erreurs d’impression! 11/2006

The following points are important and must be observed at all times:

• This model is not suitable for young persons under fourteen years of age.

• The keel ballast bulb is made of lead! This material is toxic, and must not be allowed to enter the body.

Sanding dust and slivers of the metal are particularly dangerous, as they can easily be ingested. After

working on the lead weight, clean the work place immediately, and wash your hands thoroughly. If possible

wear gloves when handling this material.

• If you need to dispose of the lead weight at any time, be sure to take it to your local toxic waste collection

point. It must never be discarded in the household refuse. If you are not sure where you can take scrap

lead, ask your local authority for information.

• The projecting parts of the model may be sharp, and the aerials and masts may cause eye injuries.

• If the model is to be built by a youngster, a parent or guardian must monitor the assembly process, as tools

and adhesives can be hazardous.

• Please operate the model carefully when there are persons or animals in the water; always keep a safe

distance between the boat and man or beast.

• Never run your boat in a protected site, an animal or plant sanctuary or a site of special scientific interest

(SSSI). Check with your local authority that the stretch of water you wish to use is suitable for model boats.

• Do not sail the vessel in salt water.

• Never run your boat in adverse conditions, e.g. rain, storm, strong wind (above Beaufort 4), choppy water

or strong currents.

• As the model is propelled solely by the wind, it should only be sailed in wind strengths of 1 to 3 on the

Beaufort scale (leaves moving in the wind). If the wind is stronger, the boat could heel severely and be

impossible to control. Gusty conditions should also be avoided.

• The model requires a breeze in order to move, i.e. in flat calm conditions the boat will just remain stationary

on the water. Please bear this in mind before sailing the model.

• Before you operate the boat, please check that the radio control system is working reliably.

• It is important to check the range of the radio control system: switch the radio control system on, hold the

transmitter in your hands, and walk about 50 m away from the boat. All the radio-controlled functions

should continue to work normally at this range.

• Ensure that the channel you intend to use is not already occupied by another modeller. Never run the boat

if you are not certain that your channel is free.

• Note that other radio equipment and transmitting stations may cause serious interference to the model’s

receiving system. If possible, ensure that no such apparatus is in use in the vicinity while you are operating

the boat.

• Switch the model’s radio system off before carrying out any work on the boat.

• Dry cells and rechargeable batteries must never be short-circuited, nor allowed to come into direct contact

with water.

• Remove all batteries from the model and the transmitter when you know you will not be using them in the

near future.

• Do not subject the model to high levels of humidity, heat, cold or dirt.

• Secure the model and the transmitter when transporting them, as they may be seriously damaged if they

are free to slide about.

• Never operate the model on moving water (e.g. a river), as it could easily be washed away downstream if

the wind conditions change.

• If you have to salvage the model, take care not to risk your own life or that of others.

• Check regularly that the boat is completely watertight, as it may sink if too much water enters the hull.

Check the model for damage before every run, and ensure that water cannot penetrate the hull.

• Allow the boat to dry out thoroughly after use.

Care and maintenance

• Clean the model carefully after every run, and remove any water which gets inside the hull. If water gets

into any of the RC components, dry them out and send them to your nearest GRAUPNER Service Centre

for checking.

• Clean the model and the transmitter using suitable cleaning agents only. We recommend wiping with a lint-

free cloth. Never use chemical cleaners, solvents, petrol, white spirit or similar.

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY

#0057088

Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! No liability for printing errors. We reserve the right to introduce

modifications. Sous réserve de modifications! Nous ne sommes pas responsables d’éventuelles erreurs d’impression! 11/2006

Notes on building the model

• This model is not intended for the beginner to modelling, and for this reason the instructions do not cover

every single step of construction, as we assume that the experienced model builder will be familiar with

these standard techniques.

• We recommend that you visit the Internet website www.micromagic-rc-segeln.de for the latest information

on assembling and setting up the model.

• If you do not understand the technical terms relating to sailing boats, you can download a sketch showing

the basic terminology from the Internet site mentioned above.

• Before you start building the boat, please take the time to study the plan and read right through the

instructions, referring constantly to the Parts List. In general terms the instructions and parts list reflect the

sequence of assembly.

• The laser-cut wooden components are retained in their sheets by small lugs. Cut them through from both

sides using a sharp knife, then break the parts away from the waste material.

• All the laser-cut parts have a black outline caused by the cutting process. You can easily sand this off if

you wish.

• The wooden internal parts for the hull are accurately pre-cut, but it is still important to trim them to match

the shape of the hull and deck precisely. If the bulkheads are a tight fit, they will show through on the

outside of the hull, so it is important to trim the parts as carefully and as accurately as you can.

• TIP: the rigging cord is easier to thread through small holes and openings if you first apply a drop of cyano

to the end to harden it, then cut off the frayed extremity.

• Compare the laser-cut parts with the sketches at the end of these instructions to help you identify them

and assign the part numbers.

• Wooden parts which have been coated with GLATTFIX sanding sealer cannot be glued satisfactorily using

UHU acrylit or STABILIT express, so keep the sealer away from the joint areas. You should also avoid

smearing excess adhesive onto the model’s surfaces, as this will often prevent paint adhering properly.

This applies in particular when you are gluing the vacuum-moulded plastic parts.

• Please bear in mind that many tools can be dangerous if misused or handled carelessly.

• Deploy the receiver aerial as high up in the hull as possible. Reception will be very poor if it is positioned

below the waterline, and effective range will be greatly reduced.

• It is important to clean the joint surfaces carefully before gluing parts together. This is best done by

sanding lightly, followed by wiping with a non-greasy liquid detergent or methylated spirit (“meths”). The

same applies to all surfaces which are to be painted, as this improves the paint’s adhesion considerably.

• Recommended adhesives for joining particular materials:

Material - material Suitable adhesives

Metal - metal Cyano-acrylate, UHU plus

ABS - wood Cyano-acrylate, UHU acrylit

ABS - ABS Cyano-acrylate, UHU acrylit, UHU plast spezial

ABS - metal Cyano-acrylate, UHU acrylit

Wood - wood Cyano-acrylate, UHU hart, white glue

Wood - metal Stabilit express

Read the instructions supplied with the adhesives. Be sure to observe any special notes in the instructions regarding particular

adhesives. If you are using acetone, methylated spirits or any other solvent as a cleaning agent, special safety measures are

necessary. Read the instructions supplied with these materials.

Produktspezifikationen

Marke:	Graupner
Kategorie:	Diversen
Modell:	MICRO MAGIC 2014

Brauchst du Hilfe?

Wenn Sie Hilfe mit Graupner MICRO MAGIC 2014 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Diversen Graupner

Graupner HoTT Bedienungsanleitung

2 August 2024

Graupner SPEED PROFI 40R - 7196 Bedienungsanleitung

8 Juli 2024

Graupner MICRO MAGIC 2014 Bedienungsanleitung

8 Juli 2024

Graupner 33583 - GR-24 PRO Bedienungsanleitung

8 Juli 2024

Graupner 33506 - GR-12 HoTT Bedienungsanleitung

8 Juli 2024

Graupner MZ-12 HoTT - S1002 Bedienungsanleitung

8 Juli 2024

Graupner POLARON EX-1400 - GR-S2018 Bedienungsanleitung

8 Juli 2024

Graupner 33700 SMART-BOX HoTT 2.4 Bedienungsanleitung

8 Juli 2024

Graupner XG-6i Bedienungsanleitung

8 Juli 2024

Graupner ULTRA DUO PLUS 40 - 6443 Bedienungsanleitung

8 Juli 2024

Bedienungsanleitung Diversen

Neueste Bedienungsanleitung für -Kategorien-

ION ICADE Bedienungsanleitung

16 Oktober 2024

Walkera Goggle 3 Bedienungsanleitung

16 Oktober 2024

Walkera Goggle 4 Bedienungsanleitung

16 Oktober 2024

Kerbl 81685 Cat flap Bedienungsanleitung

6 Oktober 2024

Tanita HC-212F Breath Checker Bedienungsanleitung

6 Oktober 2024

Somfy Telis Lounge Bedienungsanleitung

5 Oktober 2024

Navman NavBus Bedienungsanleitung

5 Oktober 2024

Trelock LS 320 Bedienungsanleitung

5 Oktober 2024

Bobike Maxi City Bedienungsanleitung

5 Oktober 2024

Tanita 1210N Bedienungsanleitung

5 Oktober 2024