Grandstream GXV3275 Bedienungsanleitung

Grandstream Bürotelefon GXV3275

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Grandstream GXV3275 (1 Seiten) in der Kategorie Bürotelefon. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

Grandstream

GXV3275

IP Multimedia Phone for AndroidTM

Quick User Guide

Basic Phone Operation

For detailed information, please consult

the GXV3275 User Manual available at:

www.grandstream.com

Reproduction or transmittal of the entire or any part,

in any form or by any means, electronic or print, for

any purpose without the express written permission

of Grandstream Networks, Inc. is not permitted.

Information in this document is subject to change

without notice.

U E , H , S SE ARPHONE EADSET PEAKERPHONE OR

HANDSET

Slide down the top status bar of the GXV3275 screen

and select “System Settings”. There are 4 media

channel options:

1) Select “3.5mm Earphone” to use earphone once the

earphone is connected to the 3.5mm headset port.

2) Select “RJ9 Headset” to use headset once the

headset is connected to the RJ9 port.

3) Select “Speaker” to use speaker. Or tap on the

Speakerphone icon on the dial screen.

4) Select “Handset” or take handset off hook to use the

handset.

M C AKE A ALL

1) Take handset off hook, or tap on icon on phone’s

desktop to open dial screen.

2) Select account on the left panel.

3) Enter the number to dial out.

4) Tap on icon to make an audio call;

Tap on icon to make a video call.

R EDIAL

1) Take handset off hook, or tap on icon on phone’s

desktop to open dial screen.

2) Tap on the last dialed number from the call log list on

the left side of the dial pad.

3) Tap on icon to redial as audio call or to redial

as video call.

ANSWER A ALL C

A) Single Incoming Call

1) Incoming Video Call: When the phone rings, tap on

“Audio Answer”, “Video Answer” or “Reject” softkey.

2) Incoming Audio Call: When the phone rings, tap on

“Answer” or “Reject” softkey.

3) Missed Call: If a call is not answered, a missed call

message will show up in idle screen. Users could tap on

the missed call to access the details.

B) Multiple Incoming Call

1) When there is another incoming call during active

call, users will hear call waiting tone.

2) The incoming call screen will show the caller name

and ID. Similar to single incoming call, users can tap on

“Audio Answer” or “Video Answer” softkey on the

screen to answer audio call or video call.

3) When the new call is answered, the previous active

call will be placed on hold.

4) To toggle between the calls, select the call on the left

panel of the screen. Then tap on “Unhold” softkey to

resume the call.

C H ALL OLD

1) Hold: During an active call, tap on softkey “Hold” on

the screen.

2) Resume: When the call is on hold, tap on softkey

“Unhold” on the screen to resume the call.

E C ND ALL

End a call by tapping on “End” softkey or hanging up

handset of the phone.

C T ALL RANSFER

A) Blind Transfer

1) During an active call, tap on “More” softkey and

select “Transfer” to bring up the transfer screen.

2) Select “Blind” on the upper left of the screen.

3) Enter the digits and tap on “Send” softkey.

B) Attended Transfer

1) During an active call, tap on “More” softkey and

select “Transfer” to bring up the transfer screen.

2) Select transfer mode as “Attended” on the upper left

of the screen.

3) Enter the digits and tap on “Send” softkey.

4) After the call is answered, tap on “Transfer” softkey

on the prompt dialog to complete the transfer.

Note:

 After step 2, if there is a call on hold on the phone, it

will be displayed on the transfer screen. If users would

like to transfer the call to it, tap on the call on hold to

complete the attended transfer.

 After step 3, a dialog will prompt on the screen with

“Cancel” softkey. If “Cancel” softkey is pressed, the call

will not be transferred. If users hang up the call (e.g.,

hang up the handset) without pressing the “Cancel”

softkey, the transfer will be completed before answer.

6-W CAY ONDFERENCE

A) Initiate Conference

1) During an active call, tap on “More” softkey and

select “Conf”.

2) Tap on icon on the conference screen.

3) Enter the number or directly select the number from

the left of the dial pad. If there is a call on hold, users

can also tap on it to add to the conference.

4) Tap on “INVITE” softkey to add the party.

5) Repeat the previous steps to add more parties in.

B) Remove Party From Conference

1) Tap on the party you would like to remove on the

conference screen.

2) Tap on icon to remove the party.

C) End Conference

Tap on “End” softkey to disconnect all the parties from

the conference.

D) Auto Conference

1) Log in GXV3275 web GUI.

2) Go to Advanced Settings->Call Features page and

set “Auto Conference” to “Yes”.

3) When there are multiple calls on the GXV3275, tap

on “More” softkey and select “CONF” to establish

conference with all parties.

V OICEMAIL

1) When there is a new voicemail, MWI LED will blink in

red and voicemail icon will show on the top status bar.

2) On the idle screen, tap on icon on the bottom of

the screen.

3) Voicemail screen with all the registered accounts and

the number of voicemails will be displayed.

4) Tap on the account to dial into the voicemail box.

Note: For each account, configure Voicemail User ID

under GXV3275 web GUI->Account->General Settings:

“Voice Mail UserID”.

MUTE/UNMUTE

To mute/unmute the phone, tap on “Mute”/“Unmute”

softkey during active call.

V AOLUME DJUSTMENT

1) Press key to decrease the volume.

2) Press key to increase the volume.

CONTACTS

To access Contacts:

1) Tap on icon in the phone’s menu or desktop.

Or,

2) Tap on icon on the bottom of the idle screen or

menu screen.

C HALL ISTORY

To access Call History:

1) Tap on icon in the phone’s menu or desktop.

Or,

2) Tap on icon on the bottom of the idle screen or

menu screen.

BLF

1) Tap on icon from phone’s menu, or tap on MPK

widget on the idle screen.

2) The configured BLF virtual key will be displayed in

the MPK application as well as the MPK widget on the

idle screen. Users will see the BLF status (idle, ringing

or busy) of the monitored extensions on the LCD.

3) The BLF virtual keys can be configured from LCD

MPK application or GXV3275 web GUI->Advanced

Settings->MPK LCD settings.

C AAMERA DJUSTMENT

The GXV3275 has a built-in camera. Scroll the wheel

up/down on the back of the camera to adjust camera

angle during the video call.

Produktspezifikationen

Marke:	Grandstream
Kategorie:	Bürotelefon
Modell:	GXV3275
Touchscreen:	Ja
Bildschirmdiagonale:	7 "
Freisprecheinrichtung:	Ja
Anrufer-Identifikation:	Ja
Upgradefähige Firmware:	Ja
WLAN:	Ja
WLAN-Standards:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth:	Ja
Bluetooth-Version:	4.0
Breite:	252 mm
Tiefe:	211 mm
Gewicht:	1770 g
Produkttyp:	IP-Telefon
Produktfarbe:	Schwarz
Höhe:	84 mm
Anzahl USB 2.0 Anschlüsse:	2
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	-10 - 60 %
Hörertyp:	Kabelgebundenes Mobilteil
Unterstützte Sicherheitsalgorithmen:	256-bit AES, HTTPS, MD5, SRTP, SSL/TLS
Unterstützte Netzwerkprotokolle:	SIP RFC3261, TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP, ICMP, DNS (A record, SRV, NAPTR), DHCP, PPPoE, SSH, TFTP, NTP, STUN, SIMPLE, LLDP-MED, LDAP, TR-069, 802.1x, TLS, SRTP
Quality of Service (QoS) Support:	Ja
Schnellstartübersicht:	Ja
Anzahl enthaltener Griffe:	1 Stück(e)
Sprachcodec:	G.711, G.726, G.729, iLBC
Anzahl der VoIP-Konten:	6
Anruftransfer:	Ja
Telefonbuch Kapazität:	1000 Eintragungen
Anruf Park:	Ja
Anrufannahme:	Ja
Vollduplex:	Ja
Linienanzahl:	6 Zeilen
Anklopfen:	Ja
Kurzwahlen:	Ja
Anruf halten:	Ja
Anrufumleitung:	Ja
Telefonkonferenz:	Ja
Display:	LCD
Netzteil Ausgangsspannung:	12 V
AC-Adapter Ausgangssstrom:	1.5 A
Stromverbrauch (Standardbetrieb):	18 W
Power over Ethernet (PoE):	Ja
Netzteil Eingansgsspannung:	100 - 240 V
Frontkamera:	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Luftfeuchtigkeit bei Lagerung:	10 - 90 %
Headset:	3,5 mm
Echounterdrückung:	Ja
Auflösung Frontkamera (numerisch):	1 MP
Video-Auflösung:	1280 x 720 Pixel
DHCP-Client:	Ja
Video-Capture Geschwindigkeit:	30 fps
Video-Codec:	H.264 BP/MP/HP
Internetverbindung:	Ja
Ethernet-Kabel:	Ja
Display-Auflösung:	1024 x 600 Pixel
Skype:	Ja
Ethernet/LAN:	Ja