Garmin GHS10i Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Garmin GHS10i (12 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
GHS10/10i handset
installation instructions
instructions d’installation
istruzioni di installazione
installationsanweisungen
instrucciones de instalación
GHS 10/10i Installation Instructions EN-1
These installation instructions are for
the GHS 10 and GHS 10i handsets.
The GHS 10 is for use with the Garmin
VHF 200 radio and the GHS 10i is for
use with the Garmin VHF 200i radio.
For additional information, refer to the
VHF 100/200 Series Radio Installation
Instructions that came with your radio.
For operational instructions, refer to
your VHF 100/200 Series Radio Owner’s
Manual.
The handset comes with a 32.8 ft. (10 m)
extension cable, a bulkhead mounting
plate, a weather cap, and the necessary
cable hardware.
Install the GHS 10 or GHS 10i
handset at least 20 in. (500
mm) from any compass.
To connect the GHS 10 or GHS 10i
handset:
1. Using the mounting plate as a
template, use a center punch to mark
the three screw locations on the
surface.
2. Use a pencil to trace the cable hole in
the center of the mounting plate. Set
the mounting plate aside.
3. Use a in. (22 mm) hole saw to cut â…ž
the cable-mounting hole.
4. Use a in. (3 mm) drill to drill the â…›
three mounting-plate holes.
GHS 10/10i Installation Instructions
Mounting
plate
Weather cap Cable nut
Cable-mounting
hole
External speaker
wires
EN-2 GHS 10/10i Installation Instructions
5. Use the three 3.5 × 20 mm, panhead
mounting screws to attach the
mounting plate.
6. Connect the extension cable to the
microphone relocation port on the
rear of the VHF 200 or VHF 200i
radio.
7. Mount the other end of the extension
cable through the mounting plate and
weather cap, securing with the cable
nut.
8. Connect the handset to the extension
cable.
Connecting an external
speaker next to the
GHS 10/10i handset
The green and yellow wires on the
extension cable can be used to connect
an external passive speaker (4 ohm, 5 W
minimum).
1. Connect the yellow wire to the
positive (+) connection on the
external speaker.
2. Connect the green wire to the
negative (-) connection on the
external speaker.
Speciî‚¿cations
Dimensions: 6.34 × 2.82 × 1.69 in.
(16.1 × 7.16 × 4.28 cm)
Weight: 12.98 oz. (368 g)
Temperature Range: from 14ºF to
122ºF (from -10ºC to 50ºC)
Compass-safe Distance: 20 in.
(500 mm)
Waterproof: IEC 60529 IPX7
(Immersion in 1 meter of water for
30 minutes)
Please visit www.garmin.com
for additional documentation and
information.


Produktspezifikationen

Marke: Garmin
Kategorie: Nicht kategorisiert
Modell: GHS10i
Breite: 72 mm
Tiefe: 42.8 mm
Gewicht: 368 g
Produktfarbe: Schwarz
Höhe: 161 mm
Display: LCD
Kabellänge: 1.5 m
Anzahl: 1
Kabelfarbe: Schwarz
Kompatibilität: VHF 200, VHF 300/300 AIS
Handy-Gerätetyp: Funkgerät

Brauchst du Hilfe?

Wenn Sie Hilfe mit Garmin GHS10i benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Garmin

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-