FXLab G007PD Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für FXLab G007PD (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Page 1
G007PA,PB,PC,PD
Professional Installation Half
Mirror Ball with Rotator
Page 2
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the product for
future reference.
BEFORE USE
You inspect this product and its power lead before use for any signs of must
damage. If the products or its lead are damaged in anyway use it, and , DO NOT
contact your supplier immediately.
PRODUCT SAFETY
• Professional install product only. This product must only be installed by a
qualied professional person and only after conducting a site survey and risk
assessment for its suitability to be used in that location. The installation must
conform to all local wiring and safety legislation.
• This product must be wired through a switched fused spur.
• For indoor use only.
• Do not use in bathrooms, or in wet or damp locations.
• Only attached to strong stable surfaces that can withstand the weight of the
product.
• Do not leave this product switched on when not attended.
• The product should be switched o and disconnected from the mains when not
in use.
• The product and its electrical parts should be inspected for damage, wear and
the ingress of dust and dirt by a professional person regularly. If any are found
stop using immediate and repair or replace.
• Only use this product for its intended use.
• Children must not play with this product
• Do not attach or allow items to be deposited in th product. is
• Do not swing from or attempt to hold the unit.
• This product should be mounted at a heigh of at least 2m to the apex of the
unit.
• Do not use in the vicinity of petrol or other ammable gasses.
• Do not use in the vicinity of heat sources such as res or cookers.
• Always wear gloves when handling this product. Cut risk
Page 3
Installation
After conducting a site survey and risk
assessment to ensure the suitability of
the location you wish to t the product
attach the unit to the surface via the 4
xing holes that can be found on the
bracket on the underside of the
product Fixings are not supplied and .
must be provided by the installer after
ensuring they are suitable for the
surface material the unit is going to be
tted to.
Always check the unit is stable and
xed in place and working correct ly
before use. The unit should run smoothy and be free of vibration.
Make sure the power cable is secure and cannot get tangled up in the equipment.
If the unit is to be tted to a ceiling it must be a minimum of 2m from the oor to the
apex of e unit. th
MAINTENANCE
Always disconnect the unit from its power supply before cleaning.
Cleaning and inspection.
1) This unit must be inspected regularly for damage, wear and the ingress of
dust and dirt into the unit by a professional person. If any is found stop
using the unit until the issue has been resolved.
2) ed The glass facets can be clean with a soft damp cloth, with a drop of
washing-up liquid. Dust can be removed by using a small paint brush or
similar.
3) Always wear gloves when handling the product.
DISPOSAL AND RECYCLING
You must not dispose of this appliance with domestic household waste.
Most local authorities have specic collection system for appliances and disposal
is free of charge to the end-user.


Produktspezifikationen

Marke: FXLab
Kategorie: Nicht kategorisiert
Modell: G007PD

Brauchst du Hilfe?

Wenn Sie Hilfe mit FXLab G007PD benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert FXLab

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-