Furman CN-15MP Bedienungsanleitung


Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Furman CN-15MP (13 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĆ¼r 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/13
Instructions
MINIPORT CN-15MP
and CN-20MP
CONTRACTOR SERIES SmartSequencerā„¢
C US
15 AMP
MINIPORT
120 VAC, 50/60 Hz
MAX LOAD 15A
POWER
EXTREME VOLT AGE
CLASS 2 WIRING
P
P
S
S
SECONDARY
LINK
SMARTSEQUENCING
OUT
IN
ND
DLY OUT
REMOTE
PORT
PRIMARY
LINK
BYPASS
120 VAC
/60/HZ
A MAX.
15 AMPS
PUSH TO RESET
C US
CN-15MP
120 VAC
/60/HZ
A MAX.
120 VAC
/60/HZ
A MAX.
C US
20 AMP
MINIPORT
120 VAC, 50/60 Hz
MAX LOAD 20A
POWER
EXTREME VOLTAGE
CLASS 2 WIRING
P
P
S
S
SECONDARY
LINK
SMARTSEQUENCING
OUT
IN
ND
DLY OUT
REMOTE
PORT
PRIMARY
LINK
BYPASS
C US
CN-20MP
CN-15MP
Contractor Grade Power Management with
SmartSequencingā„¢ Technology
Features:
SmartSequencingā„¢ technology allows large complex A/V systems to
be safely power cycled on and off sequentially, with the press of a button.
Extreme Voltage Shutdown (EVS) with safeguards against operation
during under and over voltage conditions.
Security features include cover shield to prevent tampering with switch
settings.
Forced Off immediate shutdown: for safety and ļ¬re ordinance compliance.
Multi-Color LED Indicators for status functions.
2 Power Outlets on 1 bank providing 1800 Watts of AC power (CN-15MP)
and 2400 Watts of AC power (CN-20MP).
CN-15MP ā€“ 10 ft. Power Cord 14AWG
CN-20MP - 10 ft. Power Cord 12AWG
15 Year Limited Product Warranty
CN-20MP
CN-15-20MP-DIN-00020-A
1
C US
15 AMP
MINIPORT
120 VAC, 50/60 Hz
MAX LOAD 15A
POW ER
EXT REME V OLTAGE
CLAS S 2 WIRING
P
P
S
S
SECONDARY
LINK
SMART SEQUENCING
OUT
IN
ND
DLY O UT
REMOTE
PORT
PRIMARY
LINK
BYPASS
120 VAC
/60/HZ
A MAX.
15 AMPS
PUSH T O RESET
C US
CN-15MP
120 VAC
/60/HZ
A MAX.
120 VAC
/60/HZ
A MAX.
C US
20 AM P
MINIPOR T
120 VAC, 50/60 Hz
MAX LOAD 20A
PO WER
EXT REME VOLT AGE
CLASS 2 WIRING
P
P
S
S
SEC ONDARY
LINK
SMART SEQUENCING
OUT
IN
ND
DLY OUT
REMOT E
PORT
PR IMARY
LINK
BYPASS
C US
CN-20MP
Introduction
Congratulations and thank you for choosing the Furman CN-15MP or CN-
20MP Miniport. We assure you that your Miniport will provide many years
of trouble free operation. The Miniport Power Sequencer is equipped with
Furmanā€™s exclusive SmartSequencingā„¢ technology. SmartSequenc-
ingā„¢ deļ¬nes a whole new level of power management and control while
streamlining installations from start to ļ¬nish.
Why choose Furman?
At Furman Sound, we have spent the last 30 years quietly obsessing
about professional audio and how to best separate your equipment from
the noise and damage often associated with AC power. Over the years we
have developed a multitude of technologies that have spared countless
devices from damage and earned the trust and respect of the Profession-
al A/V industry. The Contractor series represents the culmination of our
engineering expertise and leverages more than 30 years of experience.
Why choose AC power sequencing?
Many pro audio/video installations need audio power ampliļ¬ers to activate
last. Our solution is the AC power sequencer. The power sequencer pro-
vides AC power to outlet groups one at a time, thus allowing equipment to
be powered up and down in an orderly fashion by ļ¬rst providing power to
signal processing equipment and then providing power to the ampliļ¬ers.
When shutting down the A/V system, a sequencer will turn off the system
in the reverse order, hence the amps will be turned off ļ¬rst, and then the
signal processing equipment will be turned off last.
This is necessary because, as most sound reinforcement professionals
know, the majority of equipment damage occurs when devices are either
being powered up or powered down. Power sequencing allows equip-
ment to power up in sequence which prevents the dreaded speaker ā€œpopā€
associated with on off switching of signal processing equipment while
the audio power ampliļ¬ers are energized. If the signal processing ā€œpopā€
is ampliļ¬ed sufļ¬ciently, the result can damage ampliļ¬ers and speaker
components. Because it prevents this unwanted, and often costly, circum-
stance, AC power sequencing is extremely valuable.
Furman Contractor Series equipment allows sound reinforcement equip-
ment to be remotely powered up or powered down over a large distance,
not just in the immediate vicinity of the operator. A remotely mounted
switch or control pad can be used to sequence equipment on or off. In
addition, Furman Contractor Series remote functions can be initiated
across a room, on-site, or off-site with our BlueBOLT technology.
The Miniport SmartSequencer fulļ¬lls many power sequencing require-
ments that have very difļ¬cult to achieve in the past. Furman SmartSe-
quencingā„¢ delivers an end-to-end solution right out of the box! Please
review this manual to discover how the Miniport with SmartSequencingā„¢
can deliver professional results for you.
Before You Begin Inspect Upon Receipt
The box should contain the following items:
1) Miniport CN-15MP or CN-20MP
2) Quick Start Guide
3) Phoenix ā€“Type Connectors
CN-15MP
CN-15MP
CN-15MP Quick Start Guide
CN-20MP Quick Start Guide
CN-20MP
3 Phoenix Type Connectors
1. FOUR PIN CONNECTOR
2. TWO PIN CONNECTOR
3. FIVE PIN CONNECTOR
3 Phoenix Type Connectors
1. FOUR PIN CONNECTOR
2. TWO PIN CONNECTOR
3. FIVE PIN CONNECTOR
CN-20MP
2
Table of Contents
Feature Descriptions_____________________________________ 2
Important Safety Instructions________________________________ 3
Abbreviated Product Features_______________________________3
Set Up Diagrams____________________________________4 & 5
SmartSequencingā„¢101__________________________________ 6
Side Panel Overview _______________________________7, 8 & 9
Front Panel Overview_______________________________10 & 11
Setup and Troubleshooting________________________________ 11
Single Unit Set Up_____________________________________ 11
Multiple Unit Set Up______________________________________11
Breaker Overload______________________________________11
Re-syncing Multiple Sequencers____________________________12
Speciļ¬cations ________________________________________12
15 Year Limited Warranty_________________________________12
SmartSequencingā„¢
Furman SmartSequencingā„¢ is a contractor-friendly technology that
makes AC power sequencing easy to employ by non-technical person-
nel. Using SmartSequencing technology, multiple Furman Contactor
Series units can be linked together over distances up to 1000 feet using
inexpensive two conductor wire. These same two wires not only control
the sequencers, but also form the backbone of an amazingly robust
and reliable communication system through which information about
status, voltage, current, and power can be queried from any device in the
SmartSequencing network.
Generally, high-priced automation systems are used for large, innovative
installs, yet these control systems seldom combine AC power distribution
and bidirectional sequencing. SmartSequencingā„¢ provides the answer
right out of the box by offering a simple approach to AC power manage-
ment and control. Furmanā€™s newest power sequencing technology is
an end-to-end solution that is operational up to 1000 feet via a non-
polarized, isolated current loop. In situations where power sequencing is
critical, or more than one AC electrical circuit is utilized, wiring Furman
SmartSequencingā„¢ products in series is simple, fast and reliable.
EVS (EXTREME VOLTAGE SHUTDOWN)
Furmanā€™s trusted (EVS) over-voltage detection protects against prolonged
over-voltage conditions, such as accidental connections to 208 or 240
VAC or an intermittent loss of neutral. It does so by continuously monitor-
ing the incoming AC voltage and when an unsafe condition is detected,
a relay shuts off the power to the outlets until the overvoltage condition
has subsided. The Miniport also allows the EVS shut-down feature to be
overridden. The Extreme Voltage Shutdown technology is a tremendous
asset.
BB-RS232
Remote Access (and BlueBOLTĀ®)
The Miniport is a member of Furmanā€™s Contractor series of devices. All
members of the Contractor series can be controlled remotely using an
integral data-link and command API. The remote access feature delivers
integration with various control systems. The API provides a rich set of
commands and queries that allow remote control and situational aware-
ness over large distances. Furmanā€™s optional BlueBOLT RS-232-to-Ā®
Ethernet adaptor provides additional control programming and monitoring
from any Web-enabled device via Telnet, direct HTTP connection, or www.
mybluebolt.com
Security and Safety
The Miniport is readily adaptable to a wide range of installation requests
and requirements. It was designed from the ground up to be out-of-
box compatible with Furman legacy and third party equipment. Forced
Off inputs and selectable DIP switch settings are provided to allow easy
interface to devices, such as alarm systems.
Additional Features
The Miniport is equipped with LED indicators to provide visual aid in
tracking conditions such as power, protection, sequencing and communi-
cation. The Miniport CN-15MP is supplied by a 14 AWG, 10 foot AC cord.
And the Miniport CN-20MP is supplied with a 12 AWG, 10 foot AC cord.
All Contractor Series units are backed by our exclusive 15 year Limited
Warranty


Produktspezifikationen

Marke: Furman
Kategorie: Nicht kategorisiert
Modell: CN-15MP

Brauchst du Hilfe?

Wenn Sie Hilfe mit Furman CN-15MP benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Furman

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĆ¼r -Kategorien-