Frigidaire FFDI331DMS Bedienungsanleitung

Frigidaire Nicht kategorisiert FFDI331DMS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Frigidaire FFDI331DMS (12 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

All about the

Use & Care

of your

TA B L E O F C O N T E N T S

www.frigidaire.com USA 1-800-944-9044 www.frigidaire.ca Canada 1-800-265-8352

Food Waste Disposer

560C525P02 RevB (September 2011)

Product Registration........................................... 2

Important Safety Instructions .............................. 2

Removal of Old Unit ........................................... 3

Installation of Mounting Assembly................... 4 - 5

Electrical Connections ........................................ 6

Operating Instructions ........................................ 7

Troubleshooting................................................. 8

Cleaning and Maintenance .................................. 8

Notes ............................................................... 9

Warranty ........................................................ 10

Bill of sale, sales slip, cancelled check or other purchase

record should be kept to verify the original purchase date for

warranty purposes.

PRODUCT REGISTRATION

Model Number*

Serial Number*

*Above information appears on the label affixed to bottom of

the disposer. For your convenience, write down the model and

serial numbers prior to installation.

See insert for specific information about your new

disposer:

NOTE: This Food Waste Disposer has been designed to

operate on 110-120 Volt, 60Hz exclusively. Using any other

voltage or Hz adversely affects performance.

IMPORTANT: Read all instructions thoroughly. Keep this

guide for future reference.

CAUTION: Be sure to review SAFETY INSTRUCTIONS

FIRST PERTAINING TO A RISK OF FIRE, ELECTRICAL SHOCK

OR INJURY TO PERSONS before using disposer.

Call our toll free Help Line with any questions:

800-944-9044

IMPORTANT SAFETY INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS.

SAVE THESE INSTRUCTIONS.

Warning: When using electrical appliances, basic precaustions should always be followed, including the following:

1. Read all instructions before using the appliance.

2. To reduce the risk of injury, close supervision is neces

sary when an appliance is used near children.

3. Do not put fingers or hands into a waste disposer.

4. Turn the power switch to the off position before at

tempting to clear a jam or remove an object from the

disposer.

5. When attempting to loosen a jam in a waste disposer,

use a long wooden object such as a wooden spoon or

the wooden handle of a broom or mop.

6. When attempting to remove objects from a waste

disposer use long-handled tongs or pliers. If the dis

poser is magnetically actuated, non-magnetic tools

should be used.

7. To reduce the risk of injury by materials that may be

expelled by a waste disposer, do not put the following

into a disposer: clam or oyster shells; caustic drain

cleaners or similar products; glass, china or plastic;

large whole bones; metal, such as bottle caps, tin cans,

aluminum foil or utensils; hot grease or other hot

liquids; whole cornhusks.

8. When not operating a disposer, leave the stopper in

place to reduce the risks of objects falling onto the

disposer.

9. DO NOT operate disposer unless splash guard is in

place. (Does not apply to the Top Control/Batch Feed

units.)

10. For proper grounding instructions see the ELECTRICAL

CONNECTION portion of this manual.

Note: if you are not familiar iwth electrical power and procedures, call a qualified electrician.

Warning: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check

with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not

modify the plug provided with the appliance if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

REMOVAL OF OLD UNIT

TYPICAL INSTRUCTIONS, YOUR MODEL MAY VARY

Before starting this step, turn off electrical power

at the circuit breaker or fuse box.

If your old mount is the same as the mount on your new

disposer, just reverse the assembly instructions found in

section Installation of Mounting Assembly. If your new

mount system is different, follow these instructions:

A. Use a pipe wrench to disconnect drain line where it

attaches to disposer discharge tube (see A).

B. Remove disposer from sink flange by turning mount ring

to the left clockwise (see B). If you are unable to turn

the mount ring, tap on one of the extensions from the

ring with a hammer. Some mounting systems have

tubular extensions. Inserting a screwdiver into on tube

will provide additional leverage for turning the mount

ring (see B). Some disposers may require the removal

or loosening of nuts from the mount screws (see C).

Some disposers may require the removal of a clamp.

IMPORTANT: Unless you have a new home, this is a

good time to clean out the trap and drain lines by

running a drain auger or plumber’s snake before

installing your new disposer.

Caution: Be sure to support the disposer while

perfomring this step or it may fall when the

mounting ring is disconnected from the mounting

assembly. If your disposer is hard wired (metal

shielded cable not utilizing a wall plug), complete

steps C and D. If you utilize a plug- in cord, go

on to step E.

C. When disposer is removed, turn up side down and

remove electrical cover plate (see D).

D. Use screwdriver to remove green ground wire. Remove

wire nuts from black and white power wires and

separate disposer wires from power cable wires.

Loosen screws on cable clamp and separate cable from

disposer.

E. To remove remaining mount system from the sink,

loosen mount screws, push mount ring up. Under it is

the snap ring. Use screwdriver to pop off ring (see E).

Remove mount ring, protector ring and gasket from sink

flange. Some mounts will require the unscrewing of a

large ring holding the sink flange in place. Pull sink

flange up through sink and clean off old putty from sink.

DISHWASHER CONNECTION

procedure. If dishwasher is not to be connected go to

section Installation of Mounting Assembly.

A. Using a blunt instrument (steel punch or wooden dowl),

knock out entire plug (see A). Do no use a screwdriver

or sharp instrument. When knockout plug falls into

disposer, ou may remove it or simply grind it up when

the disposer is used. This will not damage the disposer

in any way, but may take sometime to grind, over the

course of several uses. Go to section Installation of

Mounting Assembly.

B. Connect dishwasher hose using hose clamp. If hose size

is different, you will need a Dishwasher Connector Kit

(see B). Make sure all plumbing connections are tight

and in accordance with all plumbing codes and ordinan

ces. Run water and check for leaks.

If you are utilizing a dishwasher, complete the following

Produktspezifikationen

Marke:	Frigidaire
Kategorie:	Nicht kategorisiert
Modell:	FFDI331DMS
Breite:	195.2 mm
Produktfarbe:	Blue, Stainless steel
Höhe:	341.3 mm
AC Eingangsspannung:	115 V
AC Eingangsfrequenz:	60 Hz
Typ:	Entsorger von Spülbeckenabfällen
Stromstärke:	4.5 A
Drehgeschwindigkeit:	1900 RPM
Fassungsvermögen:	- ml