Flyzone A6M2 Zero Bedienungsanleitung

Flyzone Funkgesteuertes Spielzeug A6M2 Zero

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Flyzone A6M2 Zero (12 Seiten) in der Kategorie Funkgesteuertes Spielzeug. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

FLZA4320 / FLZA4322

SPECIFICATIONS

Power

System:

1000kV 77g outrunner,

40A ESC,

3-45 2200 mAh battery

Wing Loading: 17-19 oz/ft2

[52-58 g/dm2]

Length: 37 in [940mm]

Radio: 6-8 channel

Wingspan: 45 in [1145mm]

Wing Area: 307 in2 [19.8 dm2]

Weight: 2.25-2.5 lb [1020-1130 g]

READ THROUGH THIS MANUAL BEFORE STARTING CONSTRUCTION. IT CONTAINS IMPORTANT

INSTRUCTIONS AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.

READ THROUGH THIS MANUAL BEFORE STARTING CONSTRUCTION. IT CONTAINS IMPORTANT

INSTRUCTIONS AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.

Flyzone® guarantees this kit to be free from defects in both

material and workmanship at the date of purchase. This warranty

does not cover any component parts damaged by use or

modification. In no case shall Flyzone’s liability exceed the

original cost of the purchased kit. Further, Flyzone reserves

the right to change or modify this warranty without notice.

In that Flyzone has no control over the final assembly or material

used for final assembly, no liability shall be assumed nor

accepted for any damage resulting from the use by the user of

the final user-assembled product. By the act of using the

user-assembled product, the user accepts all resulting liability.

If the buyer is not prepared to accept the liability associated

with the use of this product, the buyer is advised to return

this kit immediately in new and unused condition to the

place of purchase.

For warranty claims contact Hobbico Product Support:

Hobbico Product Support

3002 N. Apollo Drive Suite 1

Champaign IL 61822 USA

Telephone: (217) 398-8970 ext. 6

Fax: (217) 398-7721

E-mail: airsupport@hobbico.com

WARRANTY

I N S T R U C T I O N M A N U A L

® a Hobbico company.

™

Champaign, Illinois

(217) 398-8970

E-mail: airsupport@hobbico.com

INTRODUCTION

Thank you for purchasing the Flyzone Zero. Not only is the

Zero popular because of its history and attractive outlines,

the Zero also happens to be one of those ideal scale subjects.

Its large wing and tail area, long tail moment and landing gear

placement make it a great ﬂ yer. And even though this Zero

is relatively small at about 15% scale, all the good ﬂ ying

attributes still translate down to this Flyzone model, making

it an easy, enjoyable ﬂ yer!

For the latest technical

updates or manual

corrections scan the

QR code, or visit the

Flyzone web site at

www.flyzoneplanes.

com. Click the airplane

icon at the top of the

page, then select the

Zero when the airplane

page opens. A “Tech

Notice” box indicates

corrected or updated

technical information.

ADDITIONAL ITEMS REQUIRED

RTF Edition

Other than ordinary hobby tools, nothing else is required to

complete the RTF edition of the Zero, but some pilots may

choose to upgrade the included Smart charger to a more

advanced charger for reduced charge times, and switch from

the included 3S battery to a 4S battery for increased ﬂ ight

performance. Refer to the charger recommendation and list of

batteries under the list of items required for the Rx-R edition.

Rx-R Edition

Radio System

To operate all eight functions of the Flyzone Zero (ailerons,

elevator, throttle, rudder, retracts, ﬂ aps, releasable bomb,

lights) a minimum 7 channels is required. The lighting

harness may be connected to an additional, 8th channel,

or connected in-line to any other channel with a Y-harness

(FUTM4130). The Futaba 7C 7-channel 2.4 GHz FASST

airplane radio (FUTK7004) is suitable and capable of

operating all the functions.

LiPo Battery

The Flyzone Zero may be ﬂ own with either a 3S or 4S 2200mAh

30C battery. On 3S the Zero ﬂ ies enjoyably and scale-like,

but a 4S battery will increase speed and vertical performance.

Following are the batteries recommended:

❍ 3S 11.1V 2200 mAh 30C LiPo (GPMP0861)

❍ 4S 14.8V 2200 mAh 30C LiPo (GPMP0862)

For additional batteries more adhesive-back hook-&-loop

Velcro is also required:

❍ Great Planes Velcro Hook & Loop 1x6" (GPMQ4480)

LiPo Charger

The Smart Charger included with the RTF is a safe way to

charge your LiPo battery, but it’s very basic and will take about

two hours to charge a normally depleted 2200 mAh battery. A

suitable upgrade over the Smart Charger (or a recommended

charger for the Rx-R version) is the DuraTrax Onyx 235 AC/

DC Advance Peak Charger (DTXP4235). The 235 features

110V AC or 12V DC input power, adjustable charge rate (to

charge the recommended 2200 mAh batteries in as little as

30 minutes) and an LCD digital display screen (so you can

see how much capacity it took to charge the battery – handy

for calculating optimum ﬂ ight time).

Y-Harness

A minimum 7-channel transmitter is required to independently

operate all the functions of the Flyzone Zero. To operate

both the ﬂ aps and the releasable bomb with the included

TTX-600 6-channel transmitter, the ﬂ ap and bomb release

servo must be connected with a Y-harness (FUTM4130 - not

included). To release the bomb, the ﬂ aps will have to be

partially extended with the ﬂ ap dial. Another option would

be to disconnect either of the two servos from the receiver

making that function inoperable.

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

ADDITIONAL ITEMS REQUIRED . . . . . . . . . . . . . . . . . . .2

RTF Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Rx-R Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Install the Tail Assembly . . . . . . . . . . . . . . . . . . . . . . . . .3

Set Up the Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Set Up the Flaps and Aileron . . . . . . . . . . . . . . . . . . . . .5

Mount the Releasable Bomb. . . . . . . . . . . . . . . . . . . . . .6

Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Check/Set the Control Throws . . . . . . . . . . . . . . . . . . . .7

Mount the Propeller. . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Install the Antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Check the C.G. (Center of Gravity) . . . . . . . . . . . . . . . . .8

Set a Flight Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

FLYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .10

Motor Safety Precautions . . . . . . . . . . . . . . . . . . . . . . .11

Academy of Model Aeronautics. . . . . . . . . . . . . . . . . . .11

REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . .11

TABLE OF CONTENTS

ASSEMBLY

Install the Tail Assembly

Halfway

Joiner

Collar

Torque rod

❏ 1. Install the horizontal stabilizer followed by the torque

rod and tail gear assembly – be certain the torque rod and

the tail gear wire meet in the middle of the joiner collar, then

use a 1.5 mm hex driver with a drop of threadlocker on the

set screws to lock the assembly into position. If necessary,

adjust the tail gear wire in the joiner collar so the tail wheel

will be centered with the torque rod.

❏ 2. Install the vertical stabilizer while keying the torque rod

into the channel in the bottom of the rudder.

❏ 3. Fasten the horizontal and vertical stabilizer to the fuselage

with the M3 x 60 mm screw – a No. 1 Phillips screwdriver ﬁ ts

best and will properly key into the head of the screw, making

it easier to detect when the screw is getting tight. Use care

not to overtighten the screw – turn until you feel resistance,

then go one additional turn. Tug on the vertical stabilizer to

make certain it is secure.

Produktspezifikationen

Marke:	Flyzone
Kategorie:	Funkgesteuertes Spielzeug
Modell:	A6M2 Zero

Brauchst du Hilfe?

Wenn Sie Hilfe mit Flyzone A6M2 Zero benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Funkgesteuertes Spielzeug Flyzone

Flyzone Calypso Bedienungsanleitung

29 August 2024

Flyzone A6M2 Zero Bedienungsanleitung

29 August 2024

Flyzone B-25 Mitchell Bedienungsanleitung

29 August 2024

Flyzone Cessna 182 Skylane Bedienungsanleitung

29 August 2024

Flyzone Seawind Bedienungsanleitung

29 August 2024

Flyzone Extra 300 SX Bedienungsanleitung

29 August 2024

Flyzone DHC-2 Beaver Bedienungsanleitung

29 August 2024

Flyzone Super Cub Bedienungsanleitung

29 August 2024

Flyzone Micro Calypso Bedienungsanleitung

14 August 2024

Bedienungsanleitung Funkgesteuertes Spielzeug

Neueste Bedienungsanleitung für -Kategorien-

Proline Trencher Bedienungsanleitung

4 Oktober 2024

Futaba 12Z Bedienungsanleitung

4 Oktober 2024

Graupner 33718.XT60 Bedienungsanleitung

3 Oktober 2024

Amewi Hyper Go Bedienungsanleitung

1 Oktober 2024

Carson Drift Burner Bedienungsanleitung

1 Oktober 2024

Carson Micro X-Warrior 2.0 Bedienungsanleitung

1 Oktober 2024

Biltema 45-8119 Bedienungsanleitung

1 Oktober 2024

Traxxas Stampede Bedienungsanleitung

29 September 2024

Hobbywing XeRun XR10 Pro WP Bedienungsanleitung

25 September 2024

Hobbywing XeRun XR10 Stock Spec G2 Bedienungsanleitung

25 September 2024