Fluke BP290 Bedienungsanleitung

Fluke Batterie BP290

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fluke BP290 (5 Seiten) in der Kategorie Batterie. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

PN 4707531

July 2015

Specifications are subject to change without

notice. All product names are trademarks of

their respective companies.

BP290/BP291

Li- ion Battery Pack

Instruction Sheet

Introduction

BP290 and BP291 are Li-ion battery packs for use in the Fluke 190

Series II ScopeMeter Test Tools, the Fluke 430-II Power Quality Test

Tools, and other portable Fluke test tools. Check the users manual of

your test tool for compatibility. Within the battery pack, a microcontroller

keeps record of the charge condition of the battery and an LED indicator

is provided that informs you about the actual charge condition. The

indicator ha four LEDs and a test button. s

The battery charges when installed in the test tool or with the external

charger EBC290. To replace the battery in your test tool, see the users

manual for the test tool.

These battery packs have been tested in accordance with and comply to:

•UN Manual of Tests and Criteria Part III Subsection 38.3

(ST/SG/AC.10/11/Rev.5) – also known as the UN T19.T8 tests

•IEC62133

•DOT/IATA

Contacting Fluke

To contact Fluke, call one of the following telephone numbers:

•Technical Support USA: 1-800-44- -800-443-5853)FLUKE (1

•Calibration/Repair USA: 1-888-99- -888-993-5853)FLUKE (1

•Canada: 1-800- - -800-363-5853)36 FLUKE (1

•Europe: +31 402-675-200

•Japan: +81-3- -31146714

•Singapore: +65-6799-5566

•Anywhere in the world: +1-425-446-5500

Or, visit Fluke's website at . www.uke.com

To register your product, visit . http://register.uke.com

To view, print, or download the latest manual supplement, visit

http://us.uke.com/usen/support/manuals.

Safety Information

A Warning identies conditions and procedures that are dangerous to the

user. A Caution identies conditions and procedures that can cause

damage to the Product or the equipment under test.

 Warning

To prevent possible electrical shock, fire, or personal injury:

• Read all safety information before you use the battery.

• Use the battery only as specified, or the protection

supplied by the battery can be compromised.

• Remove the battery if not used for an extended period of

time, or if stored in temperatures >50 °

°°C. If the battery is

not removed, battery leakage can damage the test tool.

• The battery door must be closed and locked before you

operate the test tool.

• Carefully read all instructions . in this instruction sheet

• Do not use the battery around explosive gas, vapor, or in

damp or wet environments.

• Do not use the battery if it operates incorrectly.

• Examine the case before you use the test tool. Look for

cracks or missing plastic. Carefully look at the insulation

around the terminals.

• Do not use the battery if it is damaged.

• Remove all probes, test leads, and accessories from the

test tool before the battery door is opened.

• Batteries contain hazardous chemicals that can cause

burns or explode. If exposure to chemicals occurs, clean

with water and get medical aid.

• Do not disassemble the battery.

• Use only Fluke approved power adapters to charge the

battery.

• Do not disassemble or crush battery cells and battery

packs.

• Do not put battery cells and battery packs near heat or

fire. Do not put in sunlight.

• Use only specified replacement parts.

Symbols

The table below lists the symbols used on the Product and in this

instruction sheet.

Symbol Description

 Risk of Danger. Important information. See Instruction

Sheet.

 WARNING. HAZARDOUS VOLTAGE. Risk of electric

shock.



Conforms to European Union directives.

 Certied by CSA Group to North American safety

standards.



This product contains a Lithium-ion battery. Do not mix

with solid waste stream. Spent batteries should be

disposed of by a qualied recycler or hazardous

materials handler per local regulations. Contact your

authorized Fluke Service Center for recycling

information.



This product complies with the WEEE Directive

marking requirements. The axed label indicates that

you must not discard this electrical/electronic product

in domestic household waste. Product Category: With

reference to the equipment types in the WEEE

Directive Annex I, this product is classed as category 9

"Monitoring and Control Instrumentation" product. Do

not dispose of this product as unsorted municipal

waste.

Before You Start

Your shipment includes:

• BP290 or BP291 Battery Pack

• Support plate with self-adhesive tape (for BP290 only)

• Instruction Sheet (this document)

Carefully check the contents of your shipment. If content is damaged or

missing, contact your distributor or the nearest F sales or service luke

oce.

Produktspezifikationen

Marke:	Fluke
Kategorie:	Batterie
Modell:	BP290
Akku-/Batteriekapazität:	2400 mAh
Produktfarbe:	Schwarz
Akku-/Batterietechnologie:	Lithium-Ion (Li-Ion)
Menge pro Packung:	1 Stück(e)
Kompatibilität:	Fluke 190-series II
Bandbreite:	- MHz