FlinQ FQC8153 Bedienungsanleitung

FlinQ Diversen FQC8153

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr FlinQ FQC8153 (13 Seiten) in der Kategorie Diversen. Dieser Bedienungsanleitung war fĂĽr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/13
FLINQ AIRCO WINDOW VELCRO KIT
FQC-8153
USER MANUAL
V1
FEATURES:
• Universal use for all portable air conditioners and FlinQ Airco models
• Increases cooling performance
• Suitable for all common window types not measured more than 400cm around the outside
(not suitable for moving / sliding doors and windows)
• Velcro Tape: 810cm
• Window Seal: 400cm total length
• Easy and quick installation by the Velcro tape, no drilling needed
• Will keep the heat outside and the cooling inside
• Window can still be opened and closed
• Energy saving & eco friendly
• Easy to clean and washable at 40 degrees (easy-care program)
• 100% UV-proof and rainproof
• 100% polyester material
• Also suitable for air / tumble / dehumidify dryers with air hose
• Keeps the rain, mosquitoes and other bugs outside!
• Safe to use for cats as they cannot be stucked between the window anymore!
PREPARATIONS:
Measure the total length A, B and C of your window and see if it fits properly before use!
If so, open up the window and clean all the sides where the Velcro needs to be attached. Use a
degreaser or fat cleaner to wipe off all dust and fat before adding the Velcro tape.
INSTALLATION INSTRUCTIONS:
1. Mark the middle (M) of the window seal (Pic. 1).
PICTURE 1:
2. Mark the middle of the window frame and the casement (Pic. 2-4) (Picture 2 shows an open
window, Picture 3 a tilted window and Picture 4 an open skylight).
PICTURE 2, 3 and 4:
NOTE: First try to test the correct position with the window seal and see if it can fit properly by hand
first. Make sure the window can still be closed fully and check if the Velcro tape will not damage the
window frames!
3. Stick the Velcro tape to the front side (around one 1 cm wide) of the casement or to the inner
surface of the casement (where the window handle is attached).
4. First fasten side A with the zipper still closed, then side B, starting in the middle and working all the
way to the left and right or up and down.
5. IMPORTANT! When fastening, point A must be exactly the opposite of point B.
6. When closing the window take care that the seal is not jammed between the casement and window
frame.
7. Open the zipper at the positions marked with “S” and attach the exhaust airhose and close the
zipper as tight as possible.
8. Ready to use!


Produktspezifikationen

Marke: FlinQ
Kategorie: Diversen
Modell: FQC8153

Brauchst du Hilfe?

Wenn Sie Hilfe mit FlinQ FQC8153 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Diversen FlinQ

Bedienungsanleitung Diversen

Neueste Bedienungsanleitung fĂĽr -Kategorien-