Fenton RP168W Bedienungsanleitung

Fenton Plattenspieler RP168W

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fenton RP168W (20 Seiten) in der Kategorie Plattenspieler. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/20

RP168 Series Record Player Set

Ref. nr.: 102.147; 102.149

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.3

ENGLISH

Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to

benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the t time, firs

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore, do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfu tion. nc

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

n d to be replaced by a qualied technician. ee

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or er. dimm

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a -16A fuse. 10

- During a thunders rm or if the unit will not be used for a to

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guidelines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens t lifetime. he

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a speci alist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 mo if nths

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- h it has fallen, always have it checked by a If t e un

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cau se

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Ma sure that the mains lead cannot be damaged when ke

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the co y is suitable for this unit. untr

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnit to cause a shock hazard. ude

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. T y would invalidate the CE certicate and he

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. se bring them to a recycling centre. Ask your local authorities or your Plea

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations

and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCT ION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been

received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from

shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be

returned, it is important that the product is returned in the original factory box and packaging If the device has been exposed to .

drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might

damage your device. Leave the device switched o until it has reached room temperature.

OVERVIEW

1. T e arm Lever on

The xed tonearm can be raised and lowered pressing the raise / lower

lever.

2. arm Tone

3. 33 / 45 / 78 RPM Switch

This switch controls the RPM of the turntable platter.

4. Autos p Switch ON/OFF to

This switch turns auto stop on or o. When the automatic stop is

enabled, the platform will start rotating as soon as the tone arm is placed

over the record and will stop rotating when it has reached the end of the

record. Some vinyl rec ds stop fore the end do not stop when the or be or

end is reached. In this case set Auto-stop to OFF.

5. Tone arm Clip

This clip secures the tonearm while at rest or when not in use.

6. Cartridge with Needle

When the turntable is not in use it is recommendable to place the ,

removable protection cover on the stylus.

7. Volume Control

Adjust the volume for the speakers.

8. LED Indicator

Indicator lights up when power turned on.

9. Mode

Select the BT or phono play function.

10. Platter

Place you record here. r

11. 45RPM Adapter

12. DC IN port

Connecting the 12Volt/DC power adaptor.

13. Line O put ut

The audio from a playing vinyl record is sent to this line-level coaxial audio output. This must not be connected to phono

level devices.

14. USB Port

Use the included USB cable to connect your turntable to your computer. The USB connection will send audio signal from the

turntable to your computer.

OPERATION

1. Switch the fu tion mode (9) to PH. Turn on the power switch at the rear of the turntable player. The indicator will emit red nc

colou r.

2. Place a record on the turntable platter and select the desired speed (33/45/78RPM) according to the record.

NOTE: when playing a 4 PM record, use the included 45RPM adapter located inside the accessories bag. 5R

3. Remove the stylus protector. Open the tone-arm clip to release the tone-arm. Push the lift lever backward to raise the tone-

arm and gently move the tone-arm to the desired pos ion over the record. The turntable will begin to spin when the arm is it

moved toward the record. Push the lift lever forward to lower the tone-arm slowly onto the desired position on the record to

begin playing the record.

NOTE: -The record will begin t spin only when the tone-arm is moved toward the record if the Auto Stop is turned on. o

- AUTO STOP function applies to most 33RPM vinyl records. However, for very few vinyl records, it will stop when it d id

n yet reach the end (in this case, turn the AUTO STOP switch to OFF position and then it will continue playback), or it ot

will not stop when it has reached the end when AUTO STOP is ON.

4. Turn the Volume Control Knob to adjust the volume.

CONNECT BT-D EVICE

1. Switch the function mode (9) to BT. The LED indicator will ash ue colour. in bl

2. Turn on the BT function your mobile phone, tablet or other BT device and search the turntable of

player with its name Fenton recordplayer .

3. After pairing and connection, the LED indicator wil stop ashing. You can play your music from l

your BT-device.

4. Turn the volume control knob to adjust the volume.

Noted: This device does not have a BT transmitter, this means that it is not possible to send sound via BT to, for example, a BT

speaker

When the unit is used as a speaker, function cannot be used at the same time.BT ALL OTHER PLAYBACK S

Produktspezifikationen

Marke:	Fenton
Kategorie:	Plattenspieler
Modell:	RP168W
Breite:	380 mm
Tiefe:	350 mm
Gewicht:	7200 g
Höhe:	102 mm
Netzteil Ausgangsspannung:	12 V
Stromverbrauch (Standardbetrieb):	120 W
Netzteil Eingansgsspannung:	100-240 V
Netzteilfrequenz:	50-60 Hz
Netzteiltyp:	AC
Satellite Lautsprecher Abmessungen (WxDxH):	186 x 337 x 100 mm