Fenton RP118 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fenton RP118 (24 Seiten) in der Kategorie Plattenspieler. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
RP118 Series Record Player
Ref. nr.: 102.050; 102.052; 102.054; 102.056
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
NÁVOD K POUŽITÍ
V1.1
2
ENGLISH
Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to
benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the rst time, fi
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains and do not damage it. A lead
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or mmer. di
- To avoid re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a -16A fuse. 10
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- e unit has not been used for a longer period of time, If th
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the xture and o. This on
shortens t life time. he
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- his unit have a built-in lead-acid rechargeable battery. If t
Please recharge the battery every 3 months if you are
not going to use the unit for a long period of time. Or the
battery may be damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- I e unit has fallen, always have it checked by a f th
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- ke sure that the mains l cannot be damaged when Ma ead
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate t CE certicate and he
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations
and warnings. This is also applicable to all damages in whatever form.
3
OVERVIEW
1. L e output in
The sound signal from the record is directed to this line
output. You can, for example, connect an amplier or
CD/DVD player to this output.
2. Power supply port DC
To connect the supplied power adapter.
3. Tone arm lever
Enables rais and lowering the tonearm.ing
4. USB port
Use the included USB cable to connect your turntable to
your computer. The USB connection will send audio
from the turntable to your computer.
5. 33 / 45 / 78 RPM switch
Use to adjust the RPM of the turntable platter.
6. Line input
Connect a CD player, digital media player, or other
audio source to this 3,5mm (1/8”) stereo line input.
7. BT out / phono / BT switch
Select the BT out-, Phono- or BT input function.
8. Autostop switch ON/OFF
This switch turns the auto stop- nction /o. When fu on
the automatic stop is enabled, the platform will start
rotating as soon as the tone arm is placed over the
record and will stop rotating when it has reached the
end of the record. Some vinyl records stop fore the end do not stop en the end is reached. In this case turn o Auto-be or wh
stop.
9. Power volume control /
To turn the record player, rotate this knob clockwise until it clicks. When powered on, use this knob to adjust the volume on
for the internal speakers and headphones. To turn o the record player, turn this knob counter clockwise until it clicks.
10. Headp output hone
3.5mm jack to connect your headphones with.
11. LED indicator
12. Arm c lip
This arm clip secures the tonearm while at rest or when not in use. The arm clip has been designed to remain in the up
position whil unlocke st d.
13. Stylus cartridge
Cartridge containing the stylus/needle When the turntable is not in use, it is recommendable to place the removable .
protection cover on the stylus.
14. Tone arm
The xed tonearm can be raised and lowered by hand, or by pressing the raise / lower lever.
15. Platter
Spot to put the record . on
16. 45RPM adapter
This adapter allows you to play 45RPM records.
OPERATION
1. Connect the record player with the power adapter and plug the other end into a w power outlet. all
2. Remove white protective needle cover by gently pulling towards the front of the unit.
3. Place a vinyl record on the turntable platter and select the desired speed (33/45/78RPM) according to
the record.
4. Open the tone arm clip to release the tone arm. Gently move the tone arm and put the cartridge onto
the desired positi the record and the turntable player starts to play. on of
5. Turn the volume control knob clockwise to adjust the volume.
Noted: If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when nished. If Auto Stop Control is
turned OFF, record will NOT stop automatically when nished. Some vinyl records st fore the end do not stop when the op be or
end is reached. In this case set Auto-stop to OFF.
BT CONNECTI ON
Set the mode switch (7) in BT mode. The LED indicator will blink blue color. Turn on the -function on your smartphone or in BT
other BT compatible vice and search for Fenton recordplayer . After iring the LED will light up continuously ou can de “ ” pa , . Y now
play your music from your vice, using the turntable player as speaker. de
This device also features a BT transmitter, meaning that it is possible to play sound from the turntable player via BT to, for
example, a BT speaker .
Note: When the turntable is used as a speaker, all other playback functions cannot be used at the same time. being BT


Produktspezifikationen

Marke: Fenton
Kategorie: Plattenspieler
Modell: RP118

Brauchst du Hilfe?

Wenn Sie Hilfe mit Fenton RP118 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Plattenspieler Fenton

Bedienungsanleitung Plattenspieler

Neueste Bedienungsanleitung fĂźr -Kategorien-