Fenton RP135W Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fenton RP135W (20 Seiten) in der Kategorie Plattenspieler. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20
RP135W Record Player 60 s’
Ref. nr.: 102 19.1
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
V1.2
2
ENGLISH
Congratulations to the purchase of this Fenton product. Please read this manu thoroughly prior to using the unit in order to al
benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the rst time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or dimmer.
- To avoid re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will be used for a not
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the xture on and o. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 months if
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the unit has fallen, always have it checked by a
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead nnot be damaged when ca
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this uni t.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycli centre. Ask your local authorities or your ng
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make changes to the unit. This would also invalid any
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations
and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCT ION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched o until it has ached room temperature. re
OVERVIEW
1. Tuning knob
2. USB port
3. Standby indicator
4. Standby button
5. Function button
6. PREV button
7. NEXT button
8. PLAY/PAUSE button
9. STOP button
10. REC button
11. BT indicator
12. REC indicator
13. OPEN/CLOSE button
14. Volume control knob
15. Antenna
16. Headphone port
17. AUX IN socket
18. RCA output socket to connect external
speakers(with power amplier built- in)
19. Power ON/OFF switch
20. DC IN jack
21. 45RPM adaptor
22. Turntable platter
23. Speed selector
24. Tonearm
25. AUTO STOP ON/OFF Switch
26. Tone Arm Lock
27. Cartridge/needle
LISTEN TO O FM RADI
• Press standby button [4] and the default mode is FM radio mode.
• Rotate the tuning knob [1] to search for the FM radio station manually.
• Press the button [8] for 2 seconds to search stations and save stations with name P01, P02, etc.
• ss buttons [6 7] to switch between saved stations. Pre ] [
Recording
Plug in the USB drive to the USB port [2] at the front of the unit; press the REC button [ ], the REC indicator [ ] will light up 10 12
and the letters USB becomes ashing on the display and the radio program will be recorded into USB drive; press the STOP
button [9] to save the recorded le and stop recording.
PLAYING A CD
• Press the function button [5] to enter into the CD mode; press OPEN/CLOSE button [13] to open the disc tray, place
disc label side up on the tray, press OPEN/CLOSE button [ ] close the tray the disc will start playing once loaded. 13 to ;
• To pause playback press the PLAY/PAUSE button [8], to continue playback press PLAY/PAUSE button [8] again.
• To stop playback press STOP button [9].
• To skip backwards through tracks, press PREV button [6] . To skip forwards through tracks press NEXT button [7] .
Recording
There are two ways to record CD via USB:
1. Recording of one track
• Press the REC button [ ] he REC indicator [ ] will light up, on the display, REC will appear and then ONE will 10 , t 12
appear
• Press the REC button [ ] to conrm the recording. 10
• Press the NEXT button [7] to select the song to be recorded.
• Press the REC button [ ] to conrm the selection. The single song recording wil automatically end up when that song 10 l
playback is nished. During recording, you can also press STOP button [9] to stop the recording.
2. Recording of all music tracks:
• Press the REC button [ ], the REC indicator [ ] will light up, on the display, REC will appear and then ONE will 10 12
appear.
• Press the NEXT button [7] and then ALL will appear on the display.
• Press the REC button [ ] to start recording. During recording, you can also press STOP button [9] to stop the 10
recording.


Produktspezifikationen

Marke: Fenton
Kategorie: Plattenspieler
Modell: RP135W

Brauchst du Hilfe?

Wenn Sie Hilfe mit Fenton RP135W benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Plattenspieler Fenton

Bedienungsanleitung Plattenspieler

Neueste Bedienungsanleitung fĂźr -Kategorien-