Fenton RP112 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Fenton RP112 (12 Seiten) in der Kategorie Plattenspieler. Dieser Bedienungsanleitung war fĂŒr 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
RP112 Series Record Player BT
Ref. nr.: 102.157; 102.159
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
V1 .0
2
ENGLISH
Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to
benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shock epairs must only be carried out by a qualied technician in order to avoid electrical shock. . R
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the rst time, fi
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged m s lead can cause electrical shock ain
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or mmer. di
- To avoid re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the xture on and o. This
shortens t life time. he
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force e controls. th
- This unit is with speaker inside which can cause
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- his unit have a built-in lead-acid rechargeable battery. If t
Please recharge the battery every 3 months if you are
not go to use the unit for a long period of time. Or the ing
battery may be damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the unit has fallen, always have it checked by a
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains l cannot be damaged when ead
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the or nal packing material so that you can igi
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate t CE certicate anhe d
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask ur local authorities or your yo
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations
and warnings. This is also applicable to all damages in whatever form.
3
OVERVIEW
1. 45RPM Adaptor
This adaptor allows you to play 45RPM records.
2. Tone arm Lever
Raises and lowers the tonearm.
3. 33 / 45 / 78 RPM Switch
This switch controls the RPM of the turntable platter.
4. Autostop Switch ON/OFF
This switch turns auto stop on or o. When the automatic
stop is enabled, the platform will start rotating soon as as
the tone arm is placed over the record and will stop
rotating when it has reached the end of the record. Some
vinyl records stop fore the end do not stop when the be or
end is reached. In this case set Auto-stop to OFF.
5. Arm Clip
This specially designed arm clip secures the tonearm
while at rest or when not in use. The arm clip has been
designed to remain in the up position while unlocked.
6. Cartridge with needle
When the turntable is not in use, it is recommendable to
place the removable protection cover over the stylus.
7. LED indicator
8. Power & volume control kn ob
To power on the record player, turn this knob clockwise
until it clicks. When powered on, use this knob to adjust
the output volume. To turn o the record player, turn this
knob counter clockwise until it clicks.
9. DC IN port
Connecting the Volt/DC power adaptor.12
10. RCA Line output
The audio from a playing vinyl record is sent to this line-
level coaxial audio output. This must not be connected to
phono level devices.
11. Speakers
OPERATION
1. Connect the record player with the power adapter and plug the other end into a wall power outlet.
2. Remove the white protective needle cover by gently pulling towards the fr of the unit. ont
3. Place a vinyl record on the turntable platter and select the desired speed (33/45/78RPM) according to
the record.
4. Open the tone arm clip to release the tone arm. Gently move the tone arm and put the cartridge onto
the desired positi the record and the turntable player starts to play. on of
5. Turn the volume control knob clockwise to adjust the volume.
Noted: If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when nished. If Auto Stop Control is
turned OFF, record will NOT stop automatically when nished.
BT CONNECTION
BT is the default mode when the auto/stop switch is set to ON position. The LED indicator will ash in blue color.
Turn on the -function on your mobile phone or tablet PC on and then search the turntable player (Fenton recordplayer). After BT
pairing and connection, the LED will light up continuously in blue color and you can play your music on your mobile phone or
tablet PC on this turntable player.
Turn the volume control to adjust the volume. (The volume control of the mobile phone, tablet or PC can also aect the total
volume.)


Produktspezifikationen

Marke: Fenton
Kategorie: Plattenspieler
Modell: RP112

Brauchst du Hilfe?

Wenn Sie Hilfe mit Fenton RP112 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Plattenspieler Fenton

Bedienungsanleitung Plattenspieler

Neueste Bedienungsanleitung fĂŒr -Kategorien-