Fender Bullet PR 241 Bedienungsanleitung
Fender
Gitarrenverstärker/-effekte
Bullet PR 241
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fender Bullet PR 241 (4 Seiten) in der Kategorie Gitarrenverstärker/-effekte. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
THE SOUNDTHAT CREATES LEGENDS
P/N 041526
Owner,s Manual
Bullet Amp
TYPE: PR 241
Bullet / Bullet Reverb Owner’s Manual
Bullet / Bullet Reverb Sound Settings
The Fender Bullet / Bullet Reverb amplifiers present the
player with the best value of any gain switching amplifier in
its price class. The common equalization section consists of
TREBLE and BASS controls in addition to Fender's exclusive
MID control. This control provides midrange "tone shaping"
that will continuously vary your sound from smooth and
bluesy to a punchy honk, or all the way back to 0 for the
ultimate heavy metal overdrive! The NORMAL channel
consists of a VOLUME control, while the DRIVE channel
consists of VOLUME and GAIN controls which together set the
overall level for the DRIVE channel. The DRIVE channel also
incorporates Fender's innovative "smooth dipping' circuit.
This circuit concept is designed to simulate the way tubes dip
and produce the overdrive distortion sound so popular with
musicians today.
Also included is an EXTERNAL 8 ΩSPEAKER output jack
which automatically disconnects the internal 8" speaker when
used. The HEADPHONES jack automatically mutes the
speaker in addition to driving Stereo or Mono headphones.
The built in quality of a Fender amplifier is the result of over
four decades of dedication in the combined skills of research
and development by our engineers and musicians.
That is why we proudly say...FENDER,
The Sound That
Creates Legends
.
Just Pick It - Any Guitar / Any Pick-Up Combination
Hard Rock - Strat / Bridge Position
Dirty Blues - Strat / Neck Position
Total Shred - Any Guitar / Bridge Position
Bullet / Bullet Reverb Front Panel Functions
A. INPUT - A high impedance, high sensitivity plug-in
connection for instruments.
B. NORMAL VOLUME - Adjusts the overall loudness of the
Normal Channel.
C. GAIN - Adjusts the amount of preamp amplification in
the Drive Channel. Cleaner sound is achieved at lower
gain settings; high gain settings will produce more
sustain and distortion. This control works in conjunction
with the
DRIVE VOLUME
control (item E) to set the overall
loudness of the Drive Channel.
D. DRIVE SELECT - Activates the Drive Channel.
E. DRIVE VOLUME - Adjusts the overall loudness of the
Drive Channel.
F. TREBLE - Adjusts the amount of boost or cut in the high
frequency range.
G. MID - Adjusts the overall tone quality without affecting
the signal level. High MID settings will provide emphasis
in the midrange frequencies whereas a lower setting will
notch the midrange to produce sounds characteristic of
most “metal” music.
H. BASS - Adjusts the amount of boost or cut in the low
frequency range.
I. REVERB - ( BULLET REVERB ONLY.) Adjusts the amount
of reverberated signal mixed with the original dry
signal for both the Normal and Drive channels.
J. EXTERNAL SPEAKER - This jack provides an output to
an external speaker enclosure. The enclosure must
have a minimum impedance of 8ΩUse of this jack
automatically disables the internal speaker.
DO NOT
PLUG HEAD PHONES IN HERE.
K. HEADPHONES - This jack provides an output to
standard stereo or mono headphones for private
listening. NOTE: Use of this jack automatically disables
the speaker. CAUTION: Prolonged listening at high
levels may be hazardous to your hearing! This jack can
also be used as an unbalanced line output by using
either a stereo or mono 1/4 inch phone plug
connection.
L. POWER INDICATOR - When this indicator is
illuminated the Bullet / Bullet Reverb is receiving AC
power.
M. POWER SWITCH - This switch turns the AC power ON
and
OFF.
When the switch is
OFF
the amplifier is
completely shut down.
LINE CORD - This amplifier is equipped with a grounding
type supply cord to reduce the possibility of shock hazard.
Be sure to connect it to a grounded receptacle.
DO NOT
ALTER THE AC PLUG.
A B CD E F GHIJKLM
Produktspezifikationen
| Marke: | Fender |
| Kategorie: | Gitarrenverstärker/-effekte |
| Modell: | Bullet PR 241 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Fender Bullet PR 241 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Gitarrenverstärker/-effekte Fender
5 Oktober 2024
23 September 2024
17 September 2024
29 August 2024
21 August 2024
20 August 2024
20 August 2024
18 August 2024
17 August 2024
17 August 2024
Bedienungsanleitung Gitarrenverstärker/-effekte
Neueste Bedienungsanleitung fĂĽr -Kategorien-
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024