Marshall JTM45 Offset Bedienungsanleitung
Marshall
Gitarrenverstärker/-effekte
JTM45 Offset
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Marshall JTM45 Offset (6 Seiten) in der Kategorie Gitarrenverstärker/-effekte. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
From the Chairman
Congratulations on your purchase of the limited
edition reissue of the offset JTM45 halfstack. The
original versions of this amp and cabinet were built
back in 1962, the very year in which Marshall
Amplification was born. In fact, the offset head was the
first version of the JTM45 my company made and only
a mere handful of these heads and cabinets were ever
constructed. In case you are wondering, the reason the
amp's chassis was offset like this was to help ensure
that the head balanced properly when carried. Despite
the practicality of this design however, we quickly
discovered that most people preferred the symmetrical
look of a centrally placed chassis, so that’s how we’ve
been building heads ever since!
A few years ago one of these extremely rare offset
halfstacks came back into my possession and I
immediately placed it in the Marshall Museum at our
headquarters in Milton Keynes, England. Since then, all
who have seen and heard it have commented most
favourably - not only on its unique looks but also on its
rich, fierce, majestic tone.
To celebrate the dawn of a new century I wanted to
offer something truly special - hence this reissue. To
make this unique product as authentic as possible, we
have sought out and reproduced all of the original
components and methods of construction we used back
in 1962. From the hand-wired tag-board circuit housed
in an aluminium chassis, through to the original silver
Celestion Alnico loudspeakers. We have even
resurrected the original ‘coffin’ logo!
I sincerely hope that this eye-catching reissue of one
of the first Marshall amplifiers ever made, will provide
you with countless hours of playing pleasure. I'm sure
it will. I'm also sure it will prove to be a quite a
conversation piece too!
WARNING!
Please read the following list carefully.
A. ALWAYS use the correct power cord
B. NEVER attempt to by-pass the fuses or fit ones of the incorrect value.
C. NEVER attempt to replace fuses or valves with the amplifier connected to the mains.
D. DO NOT attempt to remove the amplifier chassis, there are no user serviceable parts.
E. ALWAYS have this equipment serviced or repaired by competent qualified personnel.
F. NEVER use an amplifier in damp or wet conditions.
G. DO NOT switch the amplifier on without the loudspeaker connected.
H. ENSURE that any extension cabinets used are of the correct impedance.
I. PLEASE read this instruction manual carefully before switching on.
WARNING : This apparatus must be earthed!
WARNING : Do not obstruct ventilation grille and always ensure free movement of air around the amplifier !
KEEP THESE INSTRUCTIONS
Introduction
As Jim has already stated, our goal, when building this limited edition, offset reissue, was simple. To make it as
close to the original as humanly possible! To this end we have gone to great lengths to recreate every single aspect
and specification of this visually and aurally striking item-from sourcing an exact replica of the original coffin logo (so
called because it was first made for us by a coffin manufacturer!), to ensuring that the output and power transformers
boast the same exact core lamination materials as they did back in 1962. Likewise, the amplifier circuit itself is hand-
wired on a hand-built tagboard, the chassis is constructed from aluminium and the valve complement is 3 x ECC83s
in the preamp, a GZ34 rectifier and a pair of KT66s in the power amp - just like the original.
We are delighted to report that many of our suppliers went to the same exacting lengths as we did when providing
us with parts for this reissue, and none-more-so than Celestion. Thanks to their commitment to this project they
successfully recreated the Alnico magnet, silver G12, model T0652 loudspeakers found in our museum piece-right
the way down to matching the same exact colours and lettering fonts used on the original label!
As is the case with all our amplifiers, the best way for you to truly appreciate this remarkable reissue is to grab
your favourite guitar, plug it in and play. Enjoy!
JTM45 O/S Front and Rear Panel Features
Front Panel Functions
The JTM45 O/S features four inputs, two per channel. The first channel is voiced for a high treble response with the
second channel voiced for normal response. The first input of each channel has more gain than the second input of
each channel and hence is louder. Though the first input of the first channel is the input that most guitarists use,
don’t hesitate to experiment. Some guitar players prefer to mix
the two channels by putting a patch lead between the second
input of channel 1 and the first input of channel 2 and then plug
their guitar into the first input of channel 1. Doing this allows
you to mix the different tonal characters of each channel for
greater flexibility.
See Diagram right.
Produktspezifikationen
| Marke: | Marshall |
| Kategorie: | Gitarrenverstärker/-effekte |
| Modell: | JTM45 Offset |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Marshall JTM45 Offset benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Gitarrenverstärker/-effekte Marshall
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
Bedienungsanleitung Gitarrenverstärker/-effekte
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
23 September 2024
17 September 2024
29 August 2024
21 August 2024
20 August 2024
20 August 2024
18 August 2024
17 August 2024
17 August 2024