Fender Atage 112 SE Bedienungsanleitung
Fender
Gitarrenverstärker/-effekte
Atage 112 SE
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fender Atage 112 SE (8 Seiten) in der Kategorie Gitarrenverstärker/-effekte. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
THE SOUNDTHAT CREATES LEGENDS
P/N 039080
Owner,s Manual
Stage
112
Standard Strat / General Purpose / Any Position
Singing Strat Insanity / Any Position
Rock Solid / Humbucking Bridge
Dry Scream / Humbucking Lead
Try this: On Me Drive Channel for a real bluesy sound, use Me
neck pick- up with Me guitar volume control about half way
down! Experiment with other pick-up combinations Turn up
amp volume if you need more level.
Uses the drive channel only
Uses the drive channel only
Uses the drive channel only
STAGE 112SE OWNER’S MANUAL
The Fender STAGE I 12SE amplifier is a straight-ahead combination of radical new distortion sounds and time-tested Classic
Fender Sounds packaged together in a Solid-State configuration, which is both easy to use and inherently reliable.
The STAGE 112SE NORMAL Channel features the standard compliment of VOLUME, TREBLE, MID, and BASS controls with
the addition of a MID SHIFT Button for that ultra-clean sound. The DRIVE Channel features GAIN, VOLUME, and a separate
EQ consisting of CONTOUR, TREBLE, and BASS controls. The almost unlimited combinations of the GAIN and CONTOUR
controls will vary your sound from smooth and bluesy to a honky bite or all the way to ten for the crunchiest sounds around.
You get seating smooth highs backed by deep punch. The TREBLE and BASS controls give you continuous adjustment of
the highs and lows, allowing the STAGE I 12SE to be the perfect compliment to your individual playing style.
In addition to convenience features like All Front Panel Mounted Controls, the STAGE I 12SE features a detachable footswitch
for selecting the DRIVE Channel and REVERB. Standard 1/4 inch phone jacks are used for ease of connection or extension
of the footswitch to remote pedal boards. The PREAMP OUT & POWER AMP IN jacks can be used as an effects loop or as
Send and Return points while slaving multiple amps together or for direct connection to recording and sound reinforcement
mixers. The possibilities are endless (eg: by inserting a Chorus pedal between the PREAMP OUT of one amp and the POWER
AMP IN of another, a true stereo image effect can be achieved).
Last, but definitely not least, the Fender STAGE I 12SE packs a new power amp that is based on a radically underdamped
design that interacts with the speaker in much the same way as a tube amplifier does, producing sparkle and punch with an
increase in apparent loudness and power that defies comparison to other similarly rated units. Also included is a sophisticated,
transparent protection scheme designed to completely prevent amplifier failure due to bad speaker cords or incorrectly
connected speaker jacks. This amp is LOUD and can reliably put it out, night after night.
The selection of a Fender amplifier will reward you with years of quality music in a wide range of controlled sounds. This manual
is designed to familiarize you with the equipment and to acquaint you with its many fine features. Read it carefully so that you
will benefit from all the features as soon as you start using the amplifier.
The built-in quality of a Fender amplifier is the result of over three-and-a-half decades of dedication in the combined skills of
research and development by our engineers and musicians.
That is why we proudly say.... FENDER, The Sound That Creates Legends.
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE AMPLIFIER TO RAIN OR
MOISTURE.
NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Produktspezifikationen
| Marke: | Fender |
| Kategorie: | Gitarrenverstärker/-effekte |
| Modell: | Atage 112 SE |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Fender Atage 112 SE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Gitarrenverstärker/-effekte Fender
5 Oktober 2024
23 September 2024
17 September 2024
29 August 2024
21 August 2024
20 August 2024
20 August 2024
18 August 2024
17 August 2024
17 August 2024
Bedienungsanleitung Gitarrenverstärker/-effekte
Neueste Bedienungsanleitung fĂĽr -Kategorien-
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024