Fantini Cosmi EV02F Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fantini Cosmi EV02F (12 Seiten) in der Kategorie Zentralheizungskessel. Dieser Bedienungsanleitung war für 48 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
1
EV02F ELECTRONIC CONTROL UNIT
GENERAL FEATURES
- Electronic control unit for the thermoregulation of
heating systems.
- The devices regulates the delivery water temperature
of the system as a function of the outside temperature
and of the required ambient temperature. Regulation
is performed by direct control of the burner or by
proportional-time control of a 3- or 4-way motor-
operated mixing valve.
- The outside and delivery temperatures are
detected by special probes provided for the purpose.
Temperature values are sent to the control unit
which according to the set programming determines
the delivery water temperature value to be sent to
the system to keep the set ambient temperature
constant.
- The control unit is îš¿tted with: quartz clock for daily
programming of ON/OFF times and manual/automat-
ic mode switching. Potentiometer to select system
heating curve with slope adjustable from 0.25 to 4.5.
Potentiometer to regulate daytime ambient tempera-
EV02F
ELECTRONIC CONTROL UNIT WITH QUARTZ CLOCK
for the thermoregulation of heating systems by proportional integral
control of mixing valves or by ON-OFF control of burners, daily programming.
2
ture (comfort) with parallel translation of the heating
curve. Potentiometer to regulate nighttime ambient
temperature (economy). Six-way selector to select
the operating program, switch to select burner ON/
OFF control or mixing valve proportional control. Po-
tentiometer to regulate the delay in circulation pump
shutdown. Pilot lamps, quick connection to the base
by means of FASTONS, casing and base in insulat-
ing material with transparent cover. Protection: IP40;
installation: wall, ush or rear panel mounting.
TECHNICAL DATA
- Control unit consumption: 5VA.
- Supply voltage: 230V ± 10% - 50Hz.
- Compliance with CEI EN 60730-1 Standards
- Daily programming through quartz clock with 100
hours charge.
- Mixing valve control by 2 relays
- Contact rating: 5A 230V~ (ohmic charge), voltage
free.
- Max ambient temperature: T50.
- Protection degree IP40.
- Pollution degree 2.
- Impulse voltage 4000V.
BASE REMOVAL
REAR PANEL MOUNTING
WALL MOUNTING FLUSH MOUNTING
OVERALL DIMENSIONS
110
110
55 55
138
138
60
138
138
91
93
4,5
144
144
136
3
TEMPERATURE PROBES
GENERAL FEATURES
- EC-- series temperature probes are the sensors
used by the control unit to get the information requi-
red for its operation.
- The sensing element is made up of linearised NTC
thermistors.
TECHNICAL DATA
- Cable clamp: G 1/4.
- Operating temperature: - 40 to 150°C.
- Connection between probes and control units by
means of double-wire cable, 1 mm2 min. section and
1000 metres max. length (for higher lengths increase
the cable section to keep resistance constant).
NOTE: the control unit also works with probes EC01
(outside probe), EC02 (contact probe) and EC03 (im-
mersion probe); resistance values are similar to those
tabulated below.
Resistance values as a function of temperature:
EC11 OUTSIDE PROBE
TEMPERATURE RESISTANCE
°C Ω
DELIVERY PROBES EC12 EC13
TEMPERATURE RESISTANCE
°C Ω
- 40 8629
- 35 7853
- 30 7118
- 25 6433
- 20 5720
- 15 5230
- 10 4770
- 5 4370
0 4010
+ 5 3700
+10 3440
+15 3210
+20 3020
+ 20 550
+ 30 517
+ 40 483
+ 50 448
+ 60 416
+ 70 386
+ 80 360
+ 90 338
+100 320
CONNECTIONS AND TESTS
ELECTRIC CONNECTIONS
Fit a small switch with 1A fuse valves on control unit
supply line for protecting the servo control and turn-
ing off the power when removing the control unit from
the base.
Electric connections between probes and control unit
shall be performed by two-wire cables with 1 mm2
section and max. 1000 metres length; if higher cable
lengths are required, increase the cable section in or-
der to keep cable total resistance constant.
Produktspezifikationen
| Marke: | Fantini Cosmi |
| Kategorie: | Zentralheizungskessel |
| Modell: | EV02F |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Fantini Cosmi EV02F benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Zentralheizungskessel Fantini Cosmi
24 September 2024
5 August 2024
2 August 2024
1 August 2024
26 Juli 2024
21 Juli 2024
14 Juli 2024
7 Juli 2024
23 Februar 2024
Bedienungsanleitung Zentralheizungskessel
- Zentralheizungskessel Bosch
- Zentralheizungskessel ATAG
- Zentralheizungskessel EAS Electric
- Zentralheizungskessel Vaillant
- Zentralheizungskessel Junkers
- Zentralheizungskessel De Dietrich
- Zentralheizungskessel Thermex
- Zentralheizungskessel Remeha
- Zentralheizungskessel Saunier Duval
- Zentralheizungskessel Truma
- Zentralheizungskessel Viessmann
- Zentralheizungskessel Buderus
- Zentralheizungskessel Baxi
- Zentralheizungskessel Wolf
- Zentralheizungskessel Itho Daalderop
- Zentralheizungskessel Bulex
- Zentralheizungskessel Roc
- Zentralheizungskessel Ariston Thermo
- Zentralheizungskessel La Nordica
- Zentralheizungskessel Intergas
- Zentralheizungskessel Mikoterm
- Zentralheizungskessel Ferroli
- Zentralheizungskessel Nibe
- Zentralheizungskessel Elco
- Zentralheizungskessel Daalderop
- Zentralheizungskessel Itho
- Zentralheizungskessel Morco
- Zentralheizungskessel Nefit
- Zentralheizungskessel Oertli
- Zentralheizungskessel Thermona
- Zentralheizungskessel ACV
- Zentralheizungskessel Tzerra
- Zentralheizungskessel Weishaupt
- Zentralheizungskessel Ygnis
- Zentralheizungskessel Vokèra
- Zentralheizungskessel ETA Heiztechnik
- Zentralheizungskessel A.O. Smith
- Zentralheizungskessel AGPO
- Zentralheizungskessel Glow-worm
- Zentralheizungskessel Masterwatt
- Zentralheizungskessel Halstead
- Zentralheizungskessel AWB
- Zentralheizungskessel Ravenheat
- Zentralheizungskessel Brink
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
15 Oktober 2024
14 Oktober 2024
13 Oktober 2024
10 Oktober 2024
8 Oktober 2024
8 Oktober 2024
7 Oktober 2024
7 Oktober 2024
5 Oktober 2024