Extech SP505 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Extech SP505 (5 Seiten) in der Kategorie Detector. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
USER MANUAL
Solar Power Meter
Model SP505
Addional User Manual Translaons available at www.extech.com
SP505- -GB_V1.1 /18 en 10
2
Introducon
Thank you for selecng the Extech Model Solar Power Meter This device measures the SP505 .
power of solar radiaon. Use the SP505 to measure the eecveness of solar lm, measure solar
radiaon, check solar insulated windows, check headlight intensity, and nd the opmal
incidence angle for solar panels and solar water heaters. This device is shipped fully tested and
calibrated and, with proper use, will provide years of reliable service. Please visit our website
(www.extech.com) to check for the latest version and translaons of this User Manual, and for
Customer Support.
Safety
Please read the enre User Manual before operang this device. Use the meter only as specied
and do not aempt to service or open the meter housing. Do not allow children to handle the
meter. Please dispose of baeries and meter responsibly and in accordance with all applicable
laws and regulaons. Do not look directly into the sun, damage to your eyes can result.
Meter Descripon
1. Solar Light Sensor
2. LCD
3. Unit buon
4. Zero buon
5. Power ON-OFF buon
6. Range buon
7. Hold buon
Note: Baery compartment and tripod mount are located on the
back of the meter
LCD Descripon
1. Data Hold icon
2. Zero calibraon mode
3. Baery status
4. Unit of measure (W/m
2 or BTU (ft2*h))
5. Measurement display
SP505- -GB_V1.1 /18 en 10
3
Operaon
Power the Meter
Press the buon to turn the meter ON/OFF. If the meter display does not switch ON, please
check the baeries (2 x 1.5V ‘AAA’) in the rear compartment. The meter has an APO feature
where the meter automacally switches o aer 10 minutes of inacvity.
Zero the Sensor
Cover the sensor, and press the buon to zero the display before use .
Range Selecon
Short press the buon to toggle the range of the meter. The meter display range toggles
between 0.1 and 1 unit resoluon.
Unit Selecon
Short press the buon to toggle the units between W/cm 2 and BTU ( 2* ; the lower h)
display area will show the selected units.
Data Hold
Short press the buon to freeze or unfreeze a reading on the display.
Tesng Solar Power
With the meter ON, zero the display and then point the sensor (top of meter) toward the sun
and read the displayed power measurement. A display of ‘OL’ indicates that the measured
power is beyond the range of the meter.
Other Applicaon Examples
Automobile Headlight Measurements
1. Turn on the headlights and short press the power buon to power the meter.
2. Face the sensor (top of meter) toward one headlight and then the other, recording each
reading.
3. Turn the high beams on and measure both headlights again, recording the reading s.
4. Retain the recorded readings with the vehicle for reference.
5. Short press the power buon to power OFF the meter.
Measuring the Solar Insulaon of Windows
Use the meter to test the solar î…—lm of car windows or the heat eî…¡ciency of windows in
residenal or commercial properes.
1. Turn on the meter and zero the display before taking a measurement.
2. With the window closed, aim the sensor toward the sun and record the reading.
3. Open the window and aim the device toward the sun, recording the reading.
4. Compare the two values to determine the heat eî…¡ciency of the window. Test the windows
at least once a year to monitor eî…¡ciency.

Produktspezifikationen

Marke: Extech
Kategorie: Detector
Modell: SP505

Brauchst du Hilfe?

Wenn Sie Hilfe mit Extech SP505 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Detector Extech

Bedienungsanleitung Detector

Neueste Bedienungsanleitung für -Kategorien-