Eurosound HDDA2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Eurosound HDDA2 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
HDDA2
HDMI 2.0 1x2 Splitter with 4K to 1080p
Down-scaling
All Rights Reserved
Version: _ 9 .0HDDA2 201 V1
User Manual
HDMI 2.0 1x2 Splitter
2
Statement
Thanks for purchasing this product, please read this user manual carefully before
using this product. The functions described in this version are updated till December,
2019. In the constant effort to improve our product, we reserve the right to make
functions or parameters changes without notice or obligation.
Safety Precaution
Do not dismantle the housing or modify the module to avoid electrical shock or burn.
Using supplies not meeting the products' specifications may cause damage,
deterioration or malfunction.
Do not expose the unit to rain, moisture or install this product near water.
Install the device in a place with fine ventilation.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit.
Always unplug the power to the device before cleaning.
Unplug the power when not used for a long period of time.
Refer all servicing to qualified service personnel.
After-sales Service
We provide limited warr anty for the product within three years.
Packing List
1x HDMI 2.0 1x2 Splitter
4x Plastic Cushions
1x Power Adapter (5V DC 1A)
1x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.
HDMI 2.0 1x2 Splitter
3
Product Introduction
Thanks for choosing the HDMI 2.0 1x2 Splitter, which can distribute one HDMI input to
two 4K@60Hz 4:4:4, 1080p outputs. The splitter supports HDMI video resolution up to
3D, and multichannel audio formats. Besides passing EDID information from the
display, there are multiple built- -pin DIP in EDID settings can be selected by the 4
switch on the front panel. Moreover, the splitter firmware upgrade supports convenient
through - Micro USB port.
Features
Supports HDMI 2.0 and the video resolution up to 4K@60Hz 4:4:4.
HDMI input supports HDCP 2.3 and the outputs support HDCP Active or HDCP
Passive mode.
Supports video resolution down-scaling, the 4K input can be automatically degraded
to 1080p output for compatibility with 1080p display.
18Gbps high bandwidth.
Advanced EDID management: multiple built- in EDID settings can be selected.
Built-in equalizer for signal enhancement to avoid signal attenuation in transmission.
Supports CEC pass- through.
Provides LEDs to indicate the current operating status.
F - irmware upgrade by Micro USB port.
Panel Description
Front Panel
â‘ 
â‘ 
â‘ 
â‘ â‘  POWER LED: The LED illuminates red when power is applied.
â‘¡
â‘¡
â‘¡
â‘¡â‘¡ INPUT LED: The LED illuminates blue when there is HDMI input.
â‘¢
â‘¢
â‘¢
③③ OUTPUT LEDs: The LED illuminates blue when there is HDMI output on the
corresponding channel.
IN FW
1 2
1 2 3 4
EDID
ON
OFF
1
0
123 4 5


Produktspezifikationen

Marke: Eurosound
Kategorie: Nicht kategorisiert
Modell: HDDA2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Eurosound HDDA2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Eurosound

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-