Ernitec 0070-08316 Bedienungsanleitung

Ernitec Überwachungskamera 0070-08316

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ernitec 0070-08316 (2 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Special Announcement
, For more information please refer to website.
Fully und erstand this docum ent before using this device, an d
strictl y observe rules in this d ocument when using t his devic e. If
you install this dev ice in publ ic places , provide the tip "You have
entered the area of el ectroni c surveil lance" in an eye-catching
place. Fa ilure to correctly use electrical products may ca use fire
and severe injurie s.
It alerts you to moderate dange rs which, if not
avoided , may cause minor or moderate inj uries.
It alerts you to risks. Neglect of these risks may
cause devic e damage, data loss, de vice
perform ance dete riorati on, or unpredictable result s.
It provides additi onal info rmation.
ŸStrictly o bserve i nstalla tion requi rements when installing th e
device. The manufacturer shall n ot be held responsib le for
device damage caus ed by users' non-conformanc e to these
require ments.
ŸStrictl y conform to l ocal ele ctrical sa fety standards and u se
power adapters that are marked with the LP S standard when
install ing and usi ng this dev ice. Otherwise, this device m ay be
damaged.
ŸUse accessories delivered w ith this device. The voltage must
meet inpu t voltage requirem ents for th is device.
ŸIf this devi ce is insta lled in places with unsteady voltage, ground
this device to disch arge high energy such as electrical surg es in
order to prevent the p ower supply from burning out.
ŸWhen this d evice is in u se, ensure that no water or any liquid
flows int o the devic e. If water or liquid unexpecte dly flows into
the devic e, immediately power off the devic e and disconnect all
cables (such as powe r cables and network cables) from this
device.
ŸDo not focu s strong light (such a s lighted bulbs or sunl ight) on
ŸAv oid heavy l oads, intensive sh akes, and s oaking to prevent
damages during transporta tion and s torage. The wa rranty does
not cover a ny device d amage that is caused during sec ondary
packagi ng and transportation after the original packaging is
taken apart.
ŸProtect this device from fall-down and i ntensiv e strikes, k eep the
device away from mag netic fie ld interference, and do not ins tall
the devic e in places with shaking surfaces or under s hocks.
ŸClean the d evice wit h a soft dry cl oth. For stu bborn dirt, dip the
cloth int o slight neutral cleanser, gently wipe the dirt with the
cloth, an d then dry the device.
ŸDo not jam the ventilation open ing. Foll ow the installation
instruc tions provided in this document when inst alling the device.
ŸKeep the device away from heat sou rces such as radiato rs,
electric heaters , or other hea t equipme nt.
ŸKeep the device away from moist , dusty, extremely hot or cold
places, or places wi th strong e lectric radiation.
ŸIf the devi ce is instal led outd oors, take i nsect- an d moisture-
proof measures to av oid circu it board corrosion that can affect
monitoring.
ŸRemove th e power plu g if the devi ce is idle for a long time .
ŸBefore unpacking , check whether the fragile sti cker is dam aged.
If the fragile sticker is damaged, contac t custome r service s or
sales personnel. The manufacturer shall not be held responsib le
for any artificial damage of the fragile s ticker.
ŸAll compl ete produ cts sold by t he manufa cturer are delivered
along with namepla tes, quick setup gui de and acce ssories after
strict inspection. The manufacturer sha ll not be held respons ible
for counterfeit pr oducts.
ŸThe manufacturer w ill update this manual according to produ ct
functio n enhance ment or changes and re gularly update the
software and hardw are described in this manual. Update
information will be added to new versions of this manual without
prior notice.
ŸThis manual may contain mispr ints, technology information that
is not accurate enough, or prod uct functi on and ope ration
descrip tion that i s slightl y inconsi stent with the actual product,
the final i nterpre tation of c ompany is as a standard.
ŸThis manual is only for reference and does not ensure that the
information is totally consistent with the actual product. For
consiste ncy, see the actual produc t.
Precautions
Open the package, check the app earance o f product fo r no
obvious damage, and confirm the item lis t for table 1-1 is
consistent.
Table 1 1- Pack ing list
2.1 Device Ports
Different devices may h ave differen t multi-head cables;
Please re fer to the actual product.
NOTE
NOTE
NOTE
this device. Otherwise, the s ervice li fe of the ima ge sensor may
be shortened.
ŸIf this dev ice is insta lled in places where thunder and lightn ing
frequen tly occur, g round the d evice nearby to discharge hig h
energy such as thunder strikes in order to prevent device
damage.
ŸThe laser f rom the las er high speed camera c an not dire ctly face
the human e yes to avoid possible damage to the human eye s.
ŸLaser hig h-speed c ameras’ lasers ma y cause fire hazards w hen
directly facing flammable objects within short distance, Please
keep a cert ain safe distance du ring installation.
Figure 2- 1 Multi-head cable
Table 2-1 Multi-head cable description
2 2 Camer a Dimensions.
Figure 2 2- Dimensi ons (Unit :mm)
Different devices may h ave differen t dimensions; Plea se
refer to th e actual product.
NOTE
CAUT ION
WARNING
WARNING
CAUT ION
Device Structure2
Open Package Examination1
1
2
3
4
5
6
ID Core Functio n Descrip tion
1N A/Audio output Connect t o an external audio
device such as a speak er.
2N A/
Audio inp ut
Receive an analog au dio signal
from devices such as a
sound pic kup devic e
3N/A
Supply power
DC12V
4
Yellow
green
Groundi ng wire
Connect t o ground.
5N/A
Network i nterface
Connect t o a standard Etherne t
cable.
6
Purple
Alarm inp ut 1
Alarm inp ut and alar m output
ports.
Gray Alarm inp ut COM
Yellow Alarm inp ut 2
Orange
Alarm output COM
White Alarm output 1
Component
Quantity
Remark
High Spee d Dome Camera
1
Quick Set up Guide 1
Power adapter 1
Power wire 1
A pair of glov es 1
Wall mount brack et 1 Optional
L Wrench 1
Stainle ss hexagon screw
3
Expansion bolt 4
292.6
150
Figure 2 3- Installing SD card
Loose the four screws
take out the device core
Plug SD card in
φ173.2
φ42
φ38
Reset button
Jupiter Pro Network Camera
5MP PTZ 30x Zoom Optical
Quick Setup Guide
Item no.: 0070-08316
4.3 Browsing Video
To ensure the real-time video can be played properly, you must perform
the following operation when you log in the web for the first time:
If you can view the video directly please ignore the of adding , step
trusted . sites
Figure 4 3 - Adding a trusted site
Step 2 In the Internet Explorer, choose Tool Internet Options > >
Security > Customer level, and set Download unsigned
ActiveX control and initialize and script ActiveX controls not
marked as safe for scripting under ActiveX controls and
plug-ins to Enable, as shown in figure 4-4.
Step 3 Download and install the player control as prompted.
If the repair tips displayed when installing the control, please
ignore the prompt, and continue the installation, the login page is
displayed when the control is loaded.
Step 1 Open the Internet Explorer. Choose Tools Internet options > >
Security T > rusted sites > , in the display dialog box, click Sites
Add, as shown in figure 4-3.
To browse a real-time video, click Live Video. The Live Video page
is displayed, as shown in figure 4-5.
4.4 Two-way udio a
Partial cameras do not support two-way udio this section do not a ,
apply.
Figure 4 5 - Live Video
Figure 4 4- Configuring ActiveX control and plug-in
F 3 2igure - Aligning the screw holes
NOTE
NOTE
Connection:
Step 1 Connect microphone to audio input interface of camera.
Step Connect speaker to the PC audio output interface 2 .
Step Log in camera Web, click to turn on 3 two-way udio a .
4 4.2 PC Camera.
Step1 Connect microphone to PC audio input interface.
Step2 Connect speaker to camera audio out interface.
Step3 Log in camera Web, click to turn on two-way udio a .
Figure 3-1 Bracket dimensions(unit:mm)
4.1 Login
Step 1 Open the Internet Explorer, enter the IP address of IP camera
(default value: 192.168.0.120) in the address box, and press
Enter. The login page is displayed as shown in figure 4-1 .
Step Input the user name and password.2
Ÿ The default user name is admin. The default password is admin.
Change the password when user logs into the system for first time to
ensure system security.
Ÿ You can change the system display language on the login page.
NOTE
Step3 Click Login, the main page is displayed.
4.2 Modify IP address
Choose , the Configuration > Device > Local Network Local Network
page is displayed.
Enter the IP address in the IP Address box and click as shown in Apply
figure 4-2.
After the success of the IP address setting, please use the new IP
address to log in the Web interface.
Figure 4 2 - Local Network
Figure 4 1 - Login
Step 2 Thread all cables through the cable hole on the side of the
bracket,as shown in the figure 3-2.
Step 3 Attach the high speed dome to the bracket, the tighten the
three screws, as shown in figure 3-3.
Figure 4 6 - Alarm
4.5 Alarm Configuration
Partial cameras do not support alarm this section do not apply. ,
Alarm input and Alarm output connection:
Step1 Connect alarm input device to Alarm IN0 and Alarm COM0
of multi-head cable.
Step2 Connect alarm output device to Alarm OUT1 and Alarm
COM1 of multi-head cable, alarm output interface can
connect to normal open device only.
Step3 Log in Web, Choose Configuration Alar Alarm> m >
output, set the parameters as shown in figure 4-6.
Step4 Choose , Configuratio Alar /O Alarmn > m > I Linkage
enable the I/O Alarm and set the parameters of Schedule
Setting.
NOTE
441. . Camera PC
Quick Configuration(e.g IE)4
3 Device Installation
Installation Steps:
Step Please make the mark based on bracket dimensions for 1
drilling the hole. Drill four 8 holes over 60 mm depth, and φ
drive the plastic anchors into the holes.
备注 Wall bracket Ceiling bracket
Step 4 Mount the high speed dome to the wall or ceiling and tighten
the four expansion bolts on the bracket completely.
备注 Wall bracket Ceiling bracket
F 3 3igure - Fixing the bracket and dome
Live Video
St re am Ca me ra
Playback Configurati on
If the high-speed camera is a laser camera, the laser can't directly
face the human eyes, and it can't illuminate directly the flammable
object. It needs to keep a certain safe distance to avoid fire.
NOTE
Alarm Output
Ala rm Output
Ala rm Output M ode
Ala rm Time (ms)(0: Continu ous )
Timi ng Alarm Output
Name
Valid Si gnal
Man ual Contr ol
1
Cl os e
Swit ch M od e
0
Sta rt Sto p
Ref re sh Ap p ly
I/O Alarm Linkage
Ala rm Input
Name
Trigger Mo de
Ala rm Input
Output C hann el
PTZ Linkage
Ala rm Record
SMTP
1
Co nn ec t
Local Network
Net work Card ID
IP Protocol
DHC P
IP Addre ss
Sub net M ask
Def ault Gateway
Preferred D NS Se rver
Alt ern ate D NS Server
MTU (12 80- 150 0)
Refresh Apply
1500
192.168.0.120
255.255.255.0
192.168.0.1
1
IPv4
78.3 4-φ6.5
100.0
63.0 4-φ6.2
φ115.5 63.0
Tightening
the sc rews
Tightening
the sc rews
ht tp :/ /1 92 .1 68 .0 .1 20

Produktspezifikationen

Marke: Ernitec
Kategorie: Überwachungskamera
Modell: 0070-08316

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ernitec 0070-08316 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Überwachungskamera Ernitec

Ernitec

Ernitec 0070-24127-WATERPROOF Bedienungsanleitung

4 September 2024
Ernitec

Ernitec 0070-08117 Bedienungsanleitung

2 September 2024
Ernitec

Ernitec 0070-08112 Bedienungsanleitung

23 August 2024
Ernitec

Ernitec 0070-08214 Bedienungsanleitung

23 August 2024
Ernitec

Ernitec 0070-08215 Bedienungsanleitung

23 August 2024
Ernitec

Ernitec 0070-08316 Bedienungsanleitung

23 August 2024
Ernitec

Ernitec Orion DX 832 IR Bedienungsanleitung

21 August 2024
Ernitec

Ernitec TAURUS DX 622 Bedienungsanleitung

21 August 2024
Ernitec

Ernitec 0070-04344IR Bedienungsanleitung

21 August 2024
Ernitec

Ernitec ORION DX 822IR Bedienungsanleitung

19 August 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024
D-Link

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024
Foscam

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024
Alecto

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024
Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024