Enphase IQ 7 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Enphase IQ 7 (41 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/41
INSTALLATION AND OPERATION MANUAL
December 2019 1 - -0341 00043
Enphase
IQ 7, IQ 7+, IQ 7X, and IQ 7A Micros
IQ 7 / IQ 7+ / IQ 7X / IQ 7A Micro Installation and Operation
Š 2019 Enphase Energy Inc. All rights reserved. -00043-03 141
2
Corporate Headquarters Contact Information
Enphase Energy Inc.
1420 N. McDowell Blvd.
Petaluma, CA 94954
USA
enphase.com/en-us/support/contact
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, you are encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not expressly approved by the party responsible for compliance may void the
user’s authority to operate the equipment.
Other Information
Product information is subject to change without notice. All trademarks are recognized as the property of
their respective owners.
User documentation is updated frequently; Check the Enphase website ( ) for the enphase.com/support
latest information.
To ensure optimal reliability and to meet warranty requirements, the Enphase Microinverter must be
installed according to the instructions in this manual. For warranty text refer to . enphase.com/warranty
For Enphase patent information refer to . enphase.com/company/patents/
Š 2019 Enphase Energy Inc. All rights reserved. Enphase, the Enphase logo, IQ 7, IQ 7+, IQ 7X, IQ 7A,
IQ Envoy, IQ Combiner, IQ Microinverter, Installer Toolkit, Enlighten and other trademarks or service
names are the trademarks of Enphase Energy, Inc. Data subject to change.
Audience
This manual is intended for use by professional installation and maintenance personnel.
IQ 7 / IQ 7+ / IQ 7X / IQ 7A Micro Installation and Operation
Š 2019 Enphase Energy Inc. All rights reserved. -00043-03 141
3
Table of Contents
Important Safety Information .......................................................................................................................................... 5
Read this First .................................................................................................................................................. 5
Product Labels ................................................................................................................................................. 5
Safety and Advisory Symbols........................................................................................................................... 5
IQ 7 Microinverter Safety Instructions .............................................................................................................. 5
PV Rapid Shutdown Equipment (PVRSE) ....................................................................................................... 7
The Enphase IQ System................................................................................................................................................. 8
How the Enphase IQ Series Micros Work ........................................................................................................ 9
System Monitoring ....................................................................................................................................... 9
Optimal Reliability ........................................................................................................................................ 9
Ease of Design ............................................................................................................................................. 9
Planning for Microinverter Installation ........................................................................................................................... 10
Compatibility ................................................................................................................................................... 10
Grounding Considerations.............................................................................................................................. 10
Branch Circuit Capacity .................................................................................................................................. 11
Utility Service Requirements .......................................................................................................................... 11
Wire Lengths and Voltage Rise...................................................................................................................... 11
Lightning and Surge Suppression .................................................................................................................. 12
Parts and Tools Required ............................................................................................................................................. 12
Enphase Equipment ....................................................................................................................................... 12
Other Items..................................................................................................................................................... 12
Enphase Microinverter Installation................................................................................................................................ 13
Step 1: Position the Enphase Q Cable ........................................................................................................... 14
Step 2: Position the Enphase Q Aggregator or Junction Box ........................................................................ 14
Step 3: Mount the Microinverters ................................................................................................................... 15
Step 4: Create an Installation Map ................................................................................................................. 16
Step 5: Manage the Cabling ........................................................................................................................... 17
Step 6: Connect the Microinverters ................................................................................................................ 17
Step 7: Terminate the Unused End of the Cable............................................................................................ 18
Step 8: Complete Installation of the Enphase Q Aggregator or Junction Box ................................................ 19
Step 9: Connect the PV Modules ................................................................................................................... 19
Step 10: Energize the System ........................................................................................................................ 20
Set Up and Activate Monitoring ...................................................................................................................... 20
Troubleshooting ............................................................................................................................................................ 21
Status LED Indications and Error Reporting .................................................................................................. 21
LED Operation ........................................................................................................................................... 21
DC Resistance Low – Power Off Condition ............................................................................................... 21
Other Faults ............................................................................................................................................... 22
Troubleshoot an Inoperable Microinverter...................................................................................................... 23
Disconnect a Microinverter ............................................................................................................................. 24
Install a Replacement Microinverter ............................................................................................................... 25
Ordering Replacement Parts .......................................................................................................................... 27
Enphase Q Cable Planning and Ordering ...................................................................................................... 27


Produktspezifikationen

Marke: Enphase
Kategorie: Nicht kategorisiert
Modell: IQ 7

Brauchst du Hilfe?

Wenn Sie Hilfe mit Enphase IQ 7 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Enphase

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-