Enertex ProxyTouch KNX Bedienungsanleitung

Enertex niet gecategoriseerd ProxyTouch KNX

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Enertex ProxyTouch KNX (17 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war fĂĽr 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/17
Manual and Configuration
Enertex® ProxyTouch KNX
Enertex® Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - Deutschland - mail@enertex.de
2018-04-11 Page 2 of 18
Note
The contents of this document may not be wholly or partially, reproduced, transferred,
distributed or stored in any form without prior written approval by Enertex Bayern GmbH.®
Enertex® is a registered trademark of Enertex Bayern GmbH. Other product- and company ®
names mentioned herein can be names of trademark or registered trademarks of their
respective owners.
This manual may be changed without notifications or notice and makes no claim to
completeness or accuracy.
Contents
Notes.............................................................................................................................................................. 2
Help function................................................................................................................................................. 2
Overview........................................................................................................................................................ 3
Commissioning............................................................................................................................................ 3
Supply....................................................................................................................................................... 3
Connection diagram................................................................................................................................. 4
Application................................................................................................................................................ 4
Fitting & installing instructions.................................................................................................................. 5
Default -
no waterproofing required........................................................................................................................ 5
With waterproofing -
e.g. in showers......................................................................................................................................... 7
Software description.................................................................................................................................... 8
Programming............................................................................................................................................ 8
Button partitioning.................................................................................................................................... 8
Lock object............................................................................................................................................... 9
Specification............................................................................................................................................. 9
ETS Application - Parameter....................................................................................................................... 9
General.....................................................................................................................................................................9
Buttons...................................................................................................................................................................10
Configuration of buttons.........................................................................................................................................10
Group objects.........................................................................................................................................................11
Revision History......................................................................................................................................... 18
Notes
•Installation and mounting of electrical equipment must be carried out by qualified
electricians. Please note here the section Fitting & installing instructions.
•When connecting KNX/EIB devices specialist skills provided by KNX™ trainings are
required.
•Ignoring the instructions can damage the device, as well a fire or other hazards can
arise.
•These instructions are part of the product and must be left with the end user.
•The manufacturer is not liable for costs or damages incurred by the user or third parties
through the use of the device, misuse or malfunction of the connection, malfunction of
the device or user equipment.
•Opening the housing, other unauthorized alterations and or modifications to the device
will invalidate the warranty!
•The manufacturer is not liable for improper use.
•During installation, pay attention to maintenance access. Claims for damages for
consequential damages due to removing is not granted and is excluded.
Help function
This pdf document uses the division into sections of the Acrobat Reader, which are also called
as “bookmark”. Click on the left edge on the bookmarks tab to view this.
Enertex® Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - Deutschland - mail@enertex.de
2018-04-11 Page 3 of 18
Overview
The Enertex®-ProxyTouch KNX is a capacitive touch sensor that can be installed behind
surfaces such as ceramic, wood and glass. It has three sensor areas (see Figure 7) that can be
flexibly adapted to the preferences of the user:
Basic features
•The sensors can be addressed together,
•individually,
•or by slide gestures.
•For individual sensors also a double click is applicable for each sensor area.
•If the slide gesture is set, the 3 sensor areas can be additionally addressed by a double
click and as a single common button.
Feedback
If you touch the tile, behind which the device was mounted, at the desired sensor area (A, B or
C), so a message is written to the bus. After contact (parametrizable) an audible feedback is
given, which at each panel has a different pitch (A=high, B=medium, C=low). If the back of the
device is available, a light up of orange LEDs below the respective sensor area can be seen
when touching the control panel. If the device is in programming mode, a red LED is visible and
an acoustic signal is given. The volume of the acoustic signal can be changed in three stages.
Cleaning operation
In the device a cleaning operation mode can be activated via the group object (KNX message).
When this is active and an operation/trigger of the sensors is done by the user, so no messages
are triggered and parametrizable an acoustic signal is generated. The cleaning operation mode
can be canceled by itself parametrized via a time constant up to max. 3h.
Application
Since the sensors react to changes in the surrounding electric field, the functionality of the
ProxyTouch KNX is better given at a rapid approach than at a slow. In addition, the surface of
the material has to be really touched to excite the sensor. Wiping or approaching without contact
does not lead to tripping. By using double click it has to be ensured that the complete gesture
was really led away from the sensor and back to it again. A simple quick tap with your finger, as
usual from the computer mouse operation, is not sufficient.
Commissioning
Supply
For the operation of the Enertex® ProxyTouch KNX an external voltage supply is not needed.
The device gets the supply voltage from the bus.
Enertex® Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - Deutschland - mail@enertex.de

Produktspezifikationen

Marke: Enertex
Kategorie: niet gecategoriseerd
Modell: ProxyTouch KNX

Brauchst du Hilfe?

Wenn Sie Hilfe mit Enertex ProxyTouch KNX benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung niet gecategoriseerd Enertex

Enertex

Enertex KNX SmartMeter 85A Bedienungsanleitung

31 August 2024
Enertex

Enertex ProxyTouch KNX Bedienungsanleitung

31 August 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Pioneer

Pioneer CA-R-PI.161 Bedienungsanleitung

19 September 2024
Pioneer

Pioneer CA-R-ISU.002AE Bedienungsanleitung

19 September 2024
Pioneer

Pioneer CA-R-VW.09PAE Bedienungsanleitung

19 September 2024
Exquisit

Exquisit KGC231-60-E-050CB Bedienungsanleitung

19 September 2024
Pioneer

Pioneer CA-R-PI.186 Bedienungsanleitung

19 September 2024
Kidde

Kidde 900-0076 Bedienungsanleitung

19 September 2024
Pioneer

Pioneer CA-R-PO.001 Bedienungsanleitung

19 September 2024
Speco Technologies

Speco Technologies APCR620L Bedienungsanleitung

19 September 2024
Pioneer

Pioneer CA-R-MAN.001 Bedienungsanleitung

19 September 2024
Pioneer

Pioneer CA-R-IR.002 Bedienungsanleitung

19 September 2024