Emerson PowerSure Personal XT Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Emerson PowerSure Personal XT (12 Seiten) in der Kategorie UPS. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
450, 700, 1250 VA
230V
PowerSureTM Personal XT
U MSER ANUAL
English / Deutsch / Français /
Italiano / Español
PS PXT-inglese.qxd 6-06-2001 9:51 Pagina 1
2
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important safety instructions that should be followed during
the installation and maintenance of the UPS and its batteries. Please read this
manual thoroughly before attempting to install or operate this UPS.
This equipment can be installed and operated by individuals without previous
training.
1. PowerSure Personal XT models are available for 230VAC supply voltages and
loads. Please verify that this model matches your AC mains/ load voltage
requirements.
2. This equipment is designed for Commercial/Industrial use only. Liebert
Corporation neither recommends nor knowingly sells this product for use in
critical life support applications.
3. The PowerSure Personal XT 230VAC models are not supplied with an input
power lead for connection to the mains supply. Use the input mains power
lead from your data processing equipment to connect the UPS to the mains
supply. The UPS is supplied with two output power leads with moulded
connectors to connect from the UPS output to your equipment. Additional
input/output leads can be obtained from your dealer.
Also provided is a Liebert special interconnection cable for connection to
DB9 connector on the rear of the UPS for use with Liebert's SiteNet
MultiLink® software (see user manual for details) DO NOT USE FOR
OTHER APPLICATIONS. Store in safe place if not required at this time.
4. This UPS must be earthed at all times during operation. Connect only to a
mains supply socket outlet with an earth connection. A means of disconnection of
the mains supply should be within 2 metres of the UPS.
5. WARNING: Output receptacles on the UPS are electrically live if the UPS is
switched ON, even if the UPS is not plugged in to a mains supply. The
On/Off button on the UPS does not electrically isolate the internal parts. To
isolate the UPS, switch OFF the UPS first, then unplug it from the mains.
.To reduce the risk of electric shock, do not remove the cover, as it has no
user-serviceable parts inside. Some components are live, even when AC
power is disconnected. For service, contact a qualified technician.
.To reduce the risk of fire, use the proper rating when replacing the fuse.
.To prevent the risk of fire or electric shock, install the UPS in a temperature
and humidity controlled room, free of conductive contaminants.
6. Your total load earth leakage current must not exceed 3.5 milli-amperes.
Most data processing equipment meets this requirement if you use no more
than 2 pieces of equipment. For further advice contact your dealer.
7. The UPS relies on your building wiring overcurrent protection, which must be
rated between 10-20 amperes.
8. When using the communication features on the UPS, ensure the cabling
connected to the DB9 communication port or the network connection are
kept separated by 25mm from the power leads to the UPS input and output.
PS PXT-inglese.qxd 6-06-2001 9:51 Pagina 2
3
These units bear TUV GS mark, CE mark and comply with the following standards
(limits value class B):
EN 60950 (1998.8),
EN 50091-1 (1994.4),
EMI/RFI: EN550222 class B
EMS: IEC 1000-4-2 (ESD) Level 3
IEC 1000-4-3 (RS) Level 3
IEC 1000-4-4 (EFT) Level 3
IEC 1000-4-5 (Lightning surge) Level 3
CAUTION:
Although your UPS has been designed and manufactured to assure personal
safety, improper use can result in electrical shock or fire. To insure safety,
please observe the following rules:
.Turn off and unplug your UPS before cleaning. Do not use liquid or aerosol
cleaners. A dry cloth is recommended to remove dust from the surface of
your UPS.
.Do not install or operate your UPS in or near water.
.Do not place UPS on an unstable cart, stand, or table.
.Do not place UPS under direct sunlight or close to heat emitting sources.
.Do not place UPS power cord in any area where it may get damaged by
heavy objects.
.Follow all warnings and instructions marked on the UPS. Do not attempt to
service the UPS, as it has no user-serviceable parts inside. Refer all repairs
to qualified service personnel.
ATTENTION:
Turn off and unplug your UPS from the outlet and contact qualified service
personnel if:
.The power cord or plug is damaged.
.Liquid has been spilled on the UPS.
.The fuse blows frequently.
.The UPS does not operate even when user follows the operating instructions.
CONDITIONS OF USE:
Your UPS provides conditioned power to connected equipment. Maximum load
must not exceed that shown on UPS rating label. If uncertain, consult your
distributor or Liebert.
Placing magnetic storage media on top of the UPS may result in data corruption.
PS PXT-inglese.qxd 6-06-2001 9:51 Pagina 3
Produktspezifikationen
| Marke: | Emerson |
| Kategorie: | UPS |
| Modell: | PowerSure Personal XT |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Emerson PowerSure Personal XT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung UPS Emerson
22 August 2024
22 August 2024
22 August 2024
22 August 2024
Bedienungsanleitung UPS
- UPS Approx
- UPS Gembird
- UPS HP
- UPS Voltcraft
- UPS AEG
- UPS Siemens
- UPS IKEA
- UPS Dell
- UPS LC-Power
- UPS Tripp Lite
- UPS GYS
- UPS Adj
- UPS Block
- UPS Digitus
- UPS APC
- UPS CyberPower
- UPS Eaton
- UPS EnerGenie
- UPS Furman
- UPS Riello
- UPS Puls Dimension
- UPS Avocent
- UPS Atlantis Land
- UPS Vanson
- UPS Phoenix Contact
- UPS Minuteman
- UPS V7
- UPS Equip
- UPS Salicru
- UPS SurgeX
- UPS Bxterra
- UPS Altronix
- UPS FSP
- UPS Ditek
- UPS PowerWalker
- UPS FSP/Fortron
- UPS East
- UPS Liebert
- UPS Murr Elektronik
- UPS Online USV
Neueste Bedienungsanleitung für -Kategorien-
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
11 Oktober 2024
9 Oktober 2024