Ei Electronics EI144e Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ei Electronics EI144e (30 Seiten) in der Kategorie Detektor. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/30
230V~ SMOKE & HEAT ALARMS
Ei140e Series
Instruction Manual
with Alkaline Battery Backup
© Ei Electronics 2023
P/N B20412 Rev2
Read and retain carefully for as long as the product
is being used. It contains vital information on the
operation and installation of your Alarm. The manual
should be regarded as part of the product.
If you are just installing the unit, the manual MUST
be given to the householder. The manual is to be
given to any subsequent user.
2
Installer Section
Quick Installation Guide
ALARM SHOULD BE CEILING MOUNTED AT LEAST 300mm FROM
WALLS & OBSTRUCTIONS, IDEALLY CENTRALLY IN ROOM/AREA
WIRE TO TERMINALS ON THE MOUNTING PLATE AND FIX
MOUNTING PLATE TO CEILING USING THE FIXINGS PROVIDED
LOCATE CORRECT SITING POINT
1
SLIDE ALARM ONTO MOUNTING PLATE. A CLICK SHOULD
BE HEARD AS THE TAMPER-PROOF CATCH ENGAGES
SLIDE ON ALARM
3
PRESS AND HOLD THE TEST BUTTON ON THE ALARM. THE
ALARM AND ANY OTHER INTERCONNECTED UNITS SHOULD SOUND
TEST ALARMS
4
FIX & WIRE MOUNTING PLATE
2
1. Introduction
The Ei140e series is supplied with an Easi-Fit base that
allows very quick and simple installation of the Smoke
Alarm, combined with simple detector head removal
and replacement. The Easi-Fit base automatically
connects both mains power and battery as the detector
head slides on to the Easi-Fit base.
Up to 12 Smoke/Heat Alarms can be interconnected so
that when one senses fire all the units alarm.
Interconnection can be achieved by hardwire or through
an RF mounting plate, the Ei168RC.
All Alarms feature a combined test/hush button.
3
1.1 Overview
Top ewVi
Red LED
Alarm Indicator
Green LED
Power Indicator
Test / Hush
Button
Alarm
Sounder
Ei146e Optical Alarm
Smoke Entry
Vents
Alarm
Removal
Latch
Ei144e Heat Alarm
Heat Sensor
(Thermistor)
Alarm
Removal
Latch


Produktspezifikationen

Marke: Ei Electronics
Kategorie: Detektor
Modell: EI144e

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ei Electronics EI144e benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Detektor Ei Electronics

Bedienungsanleitung Detektor

Neueste Bedienungsanleitung für -Kategorien-