Dri Eaz Vortex Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dri Eaz Vortex (9 Seiten) in der Kategorie heater. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/9
07 00211- F F174, F174-BLU 1 Legend Brands, Inc.
Axial Airmover
Owner’s Manual
Model F174, F174-BLU
LEGEND BRANDS, INC.
15180 Josh Wilson Road, Burlington, WA 98233, USA
Phone: 800- -3030 Fax: 360- -7950 - 932 757 www.dri eaz.com
This Dri-Eaz airmover will ventilate conned spaces or propel dry air across large open areas to aid in drying.
Improve indoor air quality; remove unwanted odors. May be used with up to 125 ft. of semi-rigid ducting.
Patents: http://www.LBpatents.com
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
WARNING! To reduce the risk of re or
electric shock, do not use this fan with any
solid-state speed control device.
WARNING! Unit must be grounded. Do
not use with an extension cord. Use only on GFCI protected re-
ceptacles.
WARNING! Do not touch grills when unit is operating.
NOTICE: Keep motor dry. For indoor use only.
NOTICE: Unplug when not in use or when moving unit.
NOTICE: Do not allow children to play with or around the unit.
Be sure the unit is inaccessible to children when not attended.
NOTICE: Always operate the unit on a stable, level surface so
it cannot fall and cause injury.
WARNING! Do not alter or modify the product in any way. Use
only replacement parts authorized by Legend Brands, Inc.
Modications or use of unapproved parts could create a hazard
and will void your warranty. Contact your authorized Dri-Eaz
distributor for assistance.
WARNING!
a) Do not operate any fan with a damaged cord or plug. Dis-
card fan or return to an authorized service facility for examina-
tion and/or repair.
b) Do not run cord under carpeting. Do not cover cord with
throw rugs, runners, or similar coverings. Do not route cord un-
der furniture or appliances. Arrange cord away from trac area
and where it will not be tripped over.
BEFORE YOU BEGIN
Warranty registration
Please visit to register warranty.legendbrandsrestoration.com
your purchase. Registration allows us to better assist you with
using, maintaining or servicing your equipment and to contact
you in case we have important safety information concerning
your Dri-Eaz product. If you determine service is required,
have your equipment model, serial number and original proof
of purchase available and call your distributor for assistance
with obtaining a return material authorization (RMA).
OPERATING INSTRUCTIONS
The Vortex Axial Fan is designed for air ventilation, circulation,
and extraction, and for drying of wet materials and structures
with airow.
When operating the Vortex, note the airow arrow on the hous-
ing, indicating which way the air moves. The Vortex can be
used with or without attached ducting. It is useful for either pos-
itive or negative airow, that is, blowing air into or extracting air
from spaces.
Inspect the inlet and outlet screens before plugging in the unit,
and remove any debris that may restrict airow.
When Used with Ducting
Do not install ducting when the Vortex is operating. To install
ducting, rst note the direction of airow. Place end of ducting
over the duct ring and attach securely. Ducting to t the Vortex
is available from your Dri-Eaz distributor. Ducting has quick
07 00211- F F174, F174-BLU 2 Legend Brands, Inc.
connect straps plus a snap-in ring used to fasten two sections
of ducting together.
Conned Space Ventilation
Position the Vortex at least ve feet away from the entry to the
conned space. Place it upwind so that purged gases do not
re-enter the unit. Make sure the the inlet is not blocked by a
wall or other obstruction.
Place the other end of the ducting in the conned space, an-
gled so it points at an end wall. Keep it pointed at an end wall
to prevent pockets of unmoving air, and to keep fresh air circu-
lating to all locations.
MAINTENANCE
CAUTION: Internal repair procedures should be per-
formed by a qualied technician from an authorized
service center.
WARNING: Disconnect from electrical supply prior to
servicing or cleaning.
Cord Inspection: Inspect the electrical cord for damage. Units
with damaged cords must be removed from service and re-
paired before use. Failure to do so may lead to electrical shock
or a re hazard.
Exterior Inspection: Evaluate exterior components and make
sure that all are in proper operating condition. Repair or re-
place components as required. Run the unit briey; listen for
abnormal sounds and repair as needed.
Clean Exterior: Clean the exterior plastic housing with mild
detergent and water. For deep cleaning and a lasting, protec-
tive shine, use a vinyl cleaner and protectant.
Motor Bearings: The bearings on the Dri-Eaz Vortex are per-
manently lubricated. No oiling is necessary.
For parts and service, contact your local Dri-Eaz distributor
SPECIFICATIONS
Power:
115 volts / 60 Hz
Amps:
7.4 amps
Dimensions
(D × W × H)
18 15 19 × × in.
24.6 × 26.2 × 18.2 in.
Weight:
33 lbs. 15 kg |
Motor rating:
1.0 hp
Fan s peed:
3520 RPM
Max. static pressure:
3 in. H.0 2
O
Cord length:
20 ft. 6.1 m |
Control:
1 speed toggle switch
Safety
UL/ULc
Specications are subject to change without notice.
Some values may be approximate.
.
07 00211- F F174, F174-BLU 3 Legend Brands, Inc.
TROUBLESHOOTING
WARNING: ALL THE SERVICE PROCEDURES BELOW SHOULD BE EXECUTED WITH POWER OFF I.E. UNPLUGGED.
PROBLEM
CAUSE
SOLUTION
Unit does not run.
Switch not turned on.
No power at outlet.
Circuit is overloaded and panel circuit
breaker tripped.
Loose wiring.
Switch is broken.
Turn on switch.
Check panel circuit breaker and check outlet
with receptacle tester.
Unload circuit and reset circuit breakers.
Check wiring and tighten as needed.
Replace switch.
Unit runs briey, then
shuts o on overload.
Intake and/or exhaust grill(s) ob-
structed.
Excessive duct length.
Motor bearing or internal motor wiring is
faulty.
Clean grill(s).
Shorten duct length.
Replace motor.
Unit runs but vibrates
excessively.
Dirt has built up on fan blade.
Severe jolt has bent motor shaft so unit
is out of balance.
Fan blade is damaged.
Clean fan blade
Replace motor. Replace fan blade if neces-
sary.
Replace fan blade.
Unit runs but makes a
scraping noise.
Severe jolt has deformed motor mount
so fan rubs.
Severe jolt has deformed the housing.
Repair or replace the motor as necessary.
Replace the housing or entire unit as neces-
sary.
Motor makes noise
but fan does not turn.
Severe jolt has deformed motor mount
so fan rubs.
Severe jolt has deformed the housing.
Capacitor wire is broken or loose, or ca-
pacitor has failed.
Roll pin locking fan to motor shaft is
faulty.
Repair or replace the motor as necessary.
Replace the housing or entire unit as neces-
sary.
Repair or replace the wires and/or the capaci-
tor as necessary.
Replace the roll pin.
Produktspezifikationen
Marke: | Dri Eaz |
Kategorie: | heater |
Modell: | Vortex |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Dri Eaz Vortex benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung heater Dri Eaz
18 August 2024
17 August 2024
Bedienungsanleitung heater
- heater Sinbo
- heater AFK
- heater Infiniton
- heater Clatronic
- heater Domo
- heater Emerio
- heater Tristar
- heater HP
- heater Nedis
- heater Philips
- heater SilverCrest
- heater Sunbeam
- heater Cotech
- heater Profile
- heater Quigg
- heater Adler
- heater Camry
- heater Guzzanti
- heater Princess
- heater Bosch
- heater Parkside
- heater Vonroc
- heater AEG
- heater Ardes
- heater Bauknecht
- heater Concept
- heater Electrolux
- heater Fagor
- heater Gorenje
- heater Jata
- heater Klarstein
- heater Lervia
- heater Solis
- heater Unold
- heater Bomann
- heater Essentiel B
- heater Hendi
- heater Korona
- heater Melissa
- heater OK
- heater Steba
- heater Taurus
- heater Tefal
- heater Vox
- heater Velleman
- heater ECG
- heater EMOS
- heater Thomson
- heater Black And Decker
- heater Trotec
- heater Blaupunkt
- heater Cuisinart
- heater Eldom
- heater Eta
- heater Heinner
- heater Hema
- heater Maestro
- heater Prime3
- heater Primo
- heater Solac
- heater Wilfa
- heater Dometic
- heater Eureka
- heater Alpina
- heater Candy
- heater DeWalt
- heater Corberó
- heater Einhell
- heater Bartscher
- heater Midea
- heater Otsein-Hoover
- heater Svan
- heater Zanussi
- heater King
- heater Eurom
- heater Elro
- heater Olympia
- heater Hyundai
- heater Orava
- heater Livoo
- heater Stanley
- heater DCG
- heater Tectro
- heater Crane
- heater Güde
- heater Perel
- heater Bimar
- heater Stadler Form
- heater Rowenta
- heater Sencor
- heater DeLonghi
- heater Piazzetta
- heater Vasco
- heater Hartig And Helling
- heater Reer
- heater Maxwell
- heater Ariete
- heater Kalorik
- heater Optimum
- heater Scarlett
- heater Superior
- heater Ufesa
- heater Anslut
- heater Calor
- heater Cecotec
- heater Qlima
- heater Bionaire
- heater Duux
- heater Haverland
- heater Honeywell
- heater Remko
- heater Suntec
- heater Zibro
- heater Dedra
- heater Carson
- heater Zehnder
- heater Broan
- heater MPM
- heater Thermex
- heater Imetec
- heater Logik
- heater Team
- heater Fluval
- heater Burley
- heater Stiebel Eltron
- heater Truma
- heater Brandson
- heater Heller
- heater Dimplex
- heater Sonnenkönig
- heater Eurolite
- heater Noirot
- heater Gre
- heater Mora
- heater Milwaukee
- heater Heylo
- heater Baxi
- heater Tesy
- heater Vivax
- heater EWT
- heater Kogan
- heater Royal Sovereign
- heater Innoliving
- heater Conceptronic
- heater Argo
- heater HQ
- heater Vasner
- heater Master
- heater Dovre
- heater Alpatec
- heater Olimpia Splendid
- heater SereneLife
- heater Sygonix
- heater Vitek
- heater AKO
- heater SHX
- heater Danby
- heater Sogo
- heater Fantini Cosmi
- heater Kent
- heater Mellerware
- heater Evolar
- heater EasyMaxx
- heater La Nordica
- heater Eden
- heater Real Flame
- heater Ferroli
- heater Zibro Kamin
- heater Blumfeldt
- heater Signature
- heater Wamsler
- heater Trumatic
- heater Sun Joe
- heater Noveen
- heater Swan
- heater Soler & Palau
- heater Mill
- heater Harvia
- heater Orbegozo
- heater Dantherm
- heater Izzy
- heater Jøtul
- heater Haas+Sohn
- heater Defy
- heater Duro Pro
- heater Duronic
- heater Etherma
- heater Extraflame
- heater Grandhall
- heater Heatstrip
- heater Jaga
- heater Jocel
- heater Just Fire
- heater Kambrook
- heater Kenmore
- heater Lavorwash
- heater Nestor Martin
- heater Nobo
- heater Nordic Fire
- heater Plieger
- heater Prem-i-air
- heater Solamagic
- heater SPT
- heater SunRed
- heater Vornado
- heater Waldbeck
- heater Wanders
- heater WestBend
- heater AstralPool
- heater Argoclima
- heater Lasko
- heater Hatco
- heater Barbecook
- heater Kunft
- heater Becken
- heater Nevir
- heater Rinnai
- heater Blaze
- heater Masport
- heater Hubbell
- heater Escea
- heater Ravanson
- heater Pacific Energy
- heater XPower
- heater Lenoxx
- heater Neo
- heater Jindara
- heater NewAir
- heater Air King
- heater AENO
- heater Brivis
- heater Chauvet
- heater Creda
- heater Nectre
- heater IXL
- heater JANDY
- heater Martec
- heater Ionmax
- heater Regency
- heater Braemar
- heater GoldAir
- heater Arnold Rak
- heater Guardian
- heater Ouellet
- heater Gasmate
- heater Bromic
- heater Rheem
- heater Yellow Garden Line
- heater Scandia
- heater Pureheat
- heater Fiap
- heater Gossmann
- heater Quadra-Fire
- heater Everdure
- heater Blue Rhino
- heater Mission Air
- heater Create
- heater VIESTA
- heater Big Ass Fans
- heater Brentwood
- heater Omega Altise
- heater Airo
- heater Hortus
- heater Ausclimate
- heater Brixton
- heater Euromac
- heater TAIDEN
- heater Veito
- heater Tecno Air System
- heater Adax
- heater True North
- heater Heatsome
- heater Invroheat
- heater Herschel
- heater EvoHeat
- heater Fire Sense
- heater InfraNomic
- heater Heat Storm
- heater Excelair
- heater Heatscope
- heater LifeSmart
- heater Heat1
- heater Kemlan
- heater Perfect Aire
- heater AustWood
Neueste Bedienungsanleitung für -Kategorien-
18 September 2024
18 September 2024
18 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024