Doepfer A-114v Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Doepfer A-114v (6 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
doepfer System A - 100 Dual Ring Modulator A-114
1
1. Introduction
Module A-114 (Dual Ring Modulator) contains two
separate ring modulators.
A ring modulator outputs the product (Multiplication X •
Y) of the signals at inputs X and Y. It’s similar to a
VCA, but whereas a VCA only responds to positive
voltages at the inputs (2-quadrant multiplication), the
ring modulator responds to both positive and negative
voltages (4-quadrant multiplication).
The ring modulator thus provides a refinement of
amplitude modulation (AM). Ordinary amplitude modu-
lation will output the original carrier frequency fC as
well as the two side bands (fC - fM, fC + fM) for each of
the spectral components of the carrier and modulation
signals - but ring modulation cancels out the carrier
frequencies, and just lets the side-bands pass to the
output (see Fig. 1).
A ring modulator is used for the production of bell-like
sounds, alien voices, or just to produce new timbres.
X IN
A-114
Y IN
X • Y OUT
X IN
Y IN
X • Y OUT
RING MOD.
A-114 Dual Ring Modulator System A - 100 doepfer
2
2. Dual Ring Modulator - Overview
In / Outputs:
! X In : Signal input
" Y In : Signal input
§ X*Y Out : Output
➊
âž‹
➌
X IN
X • Y
OUT
A-114
RING MOD.
Y IN
X IN
X • Y
OUT
Y IN
RING MOD.
doepfer System A - 100 Dual Ring Modulator A-114
3
3. In / Outputs
! X In • " Y In
Sockets ! and " are the signal inputs for the A-114.
Patch the signals you would like to ring modulate into
these sockets.
The inputs need to have AC signals - so you should
use audio signals, not control voltages. For control
voltages, use a VCA.
§ X*Y Out
Socket § is the ring modulator Output.
4. User examples
Basic ring modulation
Fig. 1 shows a basic form of ring modulation using two
sine waves. This patch can provide bell- and vibes -
like sounds.
Fig. 1: Ring modulation with two sine waves
X IN
A-114
Y IN
X • Y OUT
RING MO D.
f = 440 Hz
f = 77.7 Hz f + f = 517.7 Hz
f + f = 362 .3 Hz
C
MCM
fC - fM = 362.3 Hz

Produktspezifikationen

Marke: Doepfer
Kategorie: niet gecategoriseerd
Modell: A-114v

Brauchst du Hilfe?

Wenn Sie Hilfe mit Doepfer A-114v benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd Doepfer

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-