Dimplex LSTS Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dimplex LSTS (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Dimensions
(millimetres)
Electric Towel Rails
Models : LSTS
Installation and Operating Instructions
08/52814/0 (UK) Issue 0
Fig. 1
Important Safety Advice
Note - The following warnings are required
to meet EU legislation, some areas do not
apply to this product as the temperature has
been limited
WARNING - THE SURFACE OF THIS
RADIATOR CAN BE HOT.
In order to be effective the towel rail will get
hot, however momentary contact with any
part of it should not cause injury.
WARNING - In order to avoid a hazard for
very young children, this appliance should
be installed so that the lowest heated rail is
at least 600mm above the oor.
WARNING - This appliance must not be
located immediately above or below a xed
socket outlet or connection box.
IMPORTANT - If the towel rail is to be installed
in a place used by the public, a warning notice
should be placed adjacent to the rail advising
that the surface can be hot.
CAUTION - This appliance can be used by
children aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. Children shall not
play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
Children of less than 3 years should be
kept away unless continuously supervised.
Children aged from 3 years and less than 8
years shall only switch on/off the appliance
provided that it has been placed or installed
in its intended normal operating position
and they have been given supervision
or instruction concerning the use of the
appliance in a safe way and understand
the hazards involved. Children aged from 3
years and less than 8 years shall not plug in,
regulate and clean the appliance or perform
user maintenance.
CAUTION - This appliance is not intended
for use by chidren or other persons without
assistance or supervision if their physical,
sensory or mental capabilities prevent them
from using it safely. Children should be
supervised to ensure that they do not play
with the appliance.
The towel rail is to be installed so that switches
and other controls cannot be touched by a
person in the bath or shower.
IMPORTANT - If the supply cord is damaged
it must be replaced by the manufacturer or
service agent or a similarly qualied person
in order to avoid a hazard.
Precautions should be taken to ensure that
prolonged contact with the towel rail cannot
occur. Particular care should be taken in
conned areas where accidental prolonged
contact with the rail could be more likely to
occur.
This appliance should only be used to dry
fabrics washed in water using commonly
available detergents.
A means for disconnection must be
incorporated in the xed wiring in accordance
with the wiring rules.
General
Your Dimplex electric towel rail has been designed to provide an all-
the-year-round service for airing towels and articles of clothing. It is
not intended to provide a sole heating service.
The Dimplex LSTS is designed for wall mounting only, and is splash-
proof.
IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
50 min.
115
550
0
555

10
Step 2
Place the mounting strap carefully around the lower rail - see Fig. 3.
Securely x it by screwing in place fully the M4 x 10mm screw. Ensure
the bracket is tted with the rear of the strap facing directly backwards.
Step 3
Place the mounting strap into the wall mounted bracket, secure it with
the locater pin by inserting it and giving it a quarter turn - see Fig. 3.
Note: Take care and hold the towel rail in position as one bracket is
not sufcient to secure the towel rail to the wall.
Step 4
You now have a xed point to help you mark the other hole positions
for the other two wall mounting brackets. Remove the locater pin, and
place towel rail carefully to one side to allow you to repeat Steps 1, 2
and 3, for the other brackets.
To replace Cable
WARNING - The cable should only be replaced by a service agent
or a similary qualied person.
To gain access to the terminals rst remove the two screws holding
the cover in position. These screws are on top and underneath.
Remove the screw from the bottom moulding. Remove the top cover
with the neon lens and connect the wires as shown in belowFig. 4 .
Cleaning
The nish on your towel rail can be maintained by occasionally wiping
over with a damp cloth and lightly nishing with a soft dry cloth. This
should only be carried out when the rail is cold. Do not use abrasive
cleaning powders as this could damage the surface nish.
Recycling
For electrical products sold within the European Community.
At the end of the electrical products useful life it should not
be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for
recycling advice in your country.
After Sales Service
Your product is guaranteed for from the date of purchase.two years
Within this period, we undertake to repair or exchange this product
free of charge (subject to availability) provided it has been installed
and operated in accordance with these instructions.
Your rights under this guarantee are additional to your statutory rights,
which in turn are not affected by this guarantee.
Should you require after sales information or assistance with this
product please go to www.dimplex.co.uk where you will nd our self
help guide by clicking on “After Sales” or call our helpdesk on 0844
879 3587 (UK) or 01 842 4833 (R.O.I.) .
Spare parts are also available on the website.
www.dimplex.co.uk
Please retain your receipt as proof of purchase.
Lower Rail
Mounting
Bracket
First mounting
Strap position
Mounting
Strap
Fig. 3
Fig. 4
Dimplex UK Ltd.
Millbrook House
Grange Drive
Hedge End
Southampton
Hampshire. SO30 2DF
The product complies with the European Safety Standards EN60335-2-43 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and
EN60555-3. These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC
TEL: 0844 879 3587
FAX: 0844 879 3583
WEBSITE: www.dimplex.co.uk
Republic of Ireland Tel. 01 8424833
Use
Your Dimplex electric towel rail can quite safely be left on continuously
if desired without detrimental effect. When in use however no more
than three layers of towelling or similar fabric should be draped over
each rail. It is not advisable to leave very damp clothes or towels on
the rail when it is not in use, as this may affect the nish.
The rail when in use, will be warm to the touch, but is not hot enough
to scorch or burn towels or clothes.
The rail has been designed to meet the recommendations of the NHS
guidelines on safe surface temperatures and will not exceed 43
OC
during normal operating conditions. This ensures the product is safe
to use in sensitive environments such as nurseries, care homes and
public areas.
Electrical
The electrical installation of this towel rail must be carried out by a
competent electrician in accordance with the current I.E.E Regulations
for Electrical Equipment. The towel rail is suitable for use on an A.C.~
electrical supply. Before installation check that the supply voltage
corresponds with that marked on the rail.
WARNING - THIS APPLIANCE MUST BE EARTHED.
IMPORTANT - The wires in the mains lead are coloured in
accordance with the following code:
GREEN and YELLOW - EARTH
BLUE - NEUTRAL
BROWN - LIVE
In accordance with wiring rules a suitable means for disconnection
must be incorporated in the xed wiring.
If tted in a room containing a bath or shower, to comply with the
current I.E.E. Regulations, a cable outlet will be necessary with the
supply to the heater controlled by a double-pole pull-cord switch
having a contact separation of 3mm in each pole. The body of the
switch should be situated as to be normally inaccessible to a person
using a bath or shower.
Installation
The towel rail must be permanently tted to the wall.
The rail must be so mounted that the top is at least 50mm/2” below
any overhanging surface. Sufcient space must be left for access
to the terminal cover screws without removing the rail from the wall.
The rail can be mounted facing left or right, with the cable entry position
at the bottom.
Wall mounting
The Wall mounting pack contains:
(a) 3 mounting straps
(b) 3 screws (M4 x 10)
(c) 3 wall mounting brackets
(d) 3 locater pins
Procedure for xing Wall Brackets
Step 1
Mark the hole position (x) - see Fig. 1 - for the rst xing bracket and
drill and plug the wall to suit. Fit the wall mounting bracket.
(c)
wall mounting bracket
(a)
mounting
strap
phillips head
screwdriver
at head
screwdriver
(b)
screw M4x10
(d)
locater pin
rotated quarter
turn to lock
Fig. 2


Produktspezifikationen

Marke: Dimplex
Kategorie: Nicht kategorisiert
Modell: LSTS

Brauchst du Hilfe?

Wenn Sie Hilfe mit Dimplex LSTS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Dimplex

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-