Dimplex ALM20E Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dimplex ALM20E (12 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
Dimplex Pro Engine Range
Models: ENG56-400 E, ENG68-400 E, ENG56-600 E
These instructions should be read carefully and
retained for future use. Note also the information
presented on the appliance.
OPERATING
INSTRUCTION MANUAL
08/53883/0 ISSUE 6 OCN 11777
EN: This product is only suitable for well insulated rooms or occasional use. DE: Dieses Produkt ist nur für gut isolierte Bereiche oder
gelegentliche Verwendung geeignet. FR: Ce produit convient uniquement à des endroits bien isolés ou pour un usage occasionnel.
IT: Questo prodotto è adatto solo per spazi ben isolati o per uso occasionale. ES: Este producto sólo es adecuado para espacios
bien aislados o un uso ocasional. NL: Dit product is uitsluitend geschikt voor goed geïsoleerde ruimten of voor sporadisch gebruik.
PL: Produkt ten jest odpowiedni wyłącznie do dobrze odizolowanych miejsc lub do okazjonalnego użytku. NO: Dette produktet egner
seg kun for godt isolerte rom eller sporadisk bruk. RO: Acest produs este adecvat exclusiv spaţiilor bine ventilate sau utilizării ocazionale.
CZ: Tento výrobek je vhodný pouze do dobře izolovaných prostor nebo k příležitostnému použití. DK: Dette produkt er kun egnet til
velisolerede rum eller lejlighedsvis brug. PT: Este produto somente é adequado para espaços bem isolados ou uso ocasional. SE: Denna
produkt är endast avsedd för välisolerade utrymmen eller tillfällig användning. FI: Tämä tuote soveltuu ainoastaan hyvin eristettyihin tiloihin
tai satunnaiseen käyttöön. SK: Tento výrobok je vhodný len pre dobre izolované priestory alebo na občasné použitie. SI: Ta izdelek je
primeren le za dobro izolirane prostore ali za občasno uporabo. HR: Ovaj proizvod je pogodan samo za dobro izolirane prostore ili
povremenu upotrebu. HU: Ez a termék csak jól szigetelt terekhez vagy eseti használatra alkalmas
This product complies with all the required Product Safety, Electromagnetic Compatibility and Environmental
Standards. This product is fully compliant with the LVD, EMC, RoHS and Eco Design Directives.
6
Switching on the appliance
Press and hold the ENTER button for 3 seconds to activate the remote control. FIRE will be displayed and
ON will be blinking. Press ENTER to swtich ON the appliance. The lamps light up and the flame effect sets
in after approx. 45 seconds.
Adjust the Flame Setting
With the remote control activated. FIRE will be displayed and OFF flashes on the display. Press UP button
until FIRE symbol flashes. Press ENTER. The current flame setting will be displayed F1-F6. Press the UP and
DOWN buttons to adjust the setting, product beep once selection is been made. After you have selected
your flame setting press BACK to exit the menu and return to the home screen.
Select the Heater Setting
You have the option of setting the heating high (HI), low (LO) or completely interrupting heating (OFF).
Connect the remote control to the device if you have not already done so. Use the UP and DOWN buttons to
navigate to the symbol flashes. Press the ENTER key 21°C is displayed on the screen and OFF flashes,
heating starts. Then press and hold the ADV button until HI/LO or OFF appears (the respective default
setting flashes). Use UP and DOWN buttons to select the setting you want. Confirm your setting with the
ENTER key. The screen goes back and 21°C is displayed OFF flashes. If you now confirm OFF with the enter
key, the heating switches off and the screen goes back to the home screen.
NOTE: With the OFF setting, heating is completely switched off and cannot be started using the hand
setting. If heating is required, we recommend the setting LO or HI.
Setting the Thermostat
With the remote control activated. Navigate with the up / down buttons to the hand symbol . The hand
symbol flashes. Press the ENTER key 21°C appears and the heating starts, OFF flashes. However, this
only applies if the presetting LO or HI has been made before. The heating operation runs until the room
temperature of 21°C is reached. With the up / down buttons you can adjust your desired temperature if
necessary. If you choose to switch off the heating operation you can interrupt the heating by pressing
ENTER button while OFF flashing. The program then goes back to home screen.
Thermal Safety Cut-out
A thermal safety cut-out is incorporated in the fan heater to prevent damage due to overheating. This can
happen if the heat outlet was restricted in any way. If the cut-out operates, unplug the heater from the
socket outlet and allow approximately 10 minutes before reconnecting. Before switching the heater back on
remove any obstruction that may be restricting the heat outlet, then continue normal operation.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance
must not be supplied through an external switching device, such as a timer, or connected to a switch that is
regularly switched on and off by the utility.
Setting the Date and Time
To set the date and time on the heater; with the remote control activated navigate UP/DOWN button to Date
& Time icon
1. Press Enter when the is blinking
2. Press and to set the Hour, press Enter
3. Press and to set the Minutes, press Enter to confirm the time
4. Press and to set the Day, press Enter
5. Press and to set the Month, press Enter
6. Press and to set the Year, press Enter to confirm the year
7. Press and to select ON/OFF for the Daylight saving time, press Enter to confirm and returns to home
screen.
7
Modes of Remote Operation
User Timer : Provides greatest flexibility to the user. Four times slots are available throughout the day and
these can be customised for each day of the week. See “How to adjust the timer modes” for instructions on
adjusting these from the factory default time periods & temperatures.
Manual Mode : This mode heats the room to the temperature you have set the remote control to.
Frost Protection : This mode will maintain a room temperature to 7 C. This mode should be used to °
provide protection against frost as indicated by the frost icon.
Choosing and Setting a User timer Mode
User Timer - To re-programme the factory default Timer Modes: with the remote control activated,
navigate UP/DOWN button to user timer
1. Press Enter when is blinking
2. Press Once EDIT icon blinks then press Enter
*Days of the weeks are now displayed at the top of the screen*
Day 1 = Monday
Day 2 = Tuesday
Day 3 = Wednesday
Day 4 = Thursday
Day 5 = Friday
Day 6 = Saturday
Day 7 = Sunday
4. Press to navigate to the desired day and Press Enter to Select
5. P1 will be displayed on screen
6. Press Enter to select P1,or to navigate to P2, P3 or P4 press > and press Enter to select
7. ON will be displayed
8. Press or to adjust the ON Hour time, press Enter to Confirm
9. Press or to adjust the ON Minute time, press Enter to Confirm
10. Press
10. Press
10. Press
10. Press 10. Press or to adjust the T
to adjust the T
to adjust the T
to adjust the Temperature setting, pr
emperature setting, pr
emperature setting, pr
emperature setting, press Enter to Confirm
ess Enter to Confirm
ess Enter to Confirm
ess Enter to Confirm to adjust the Temperature setting, press Enter to Confirm
11.
11.
11.
11. OFF will be displayed
OFF will be displayed
OFF will be displayed
OFF will be displayed11. OFF will be displayed
12. Press or to adjust the OFF Hour time, press Enter to Confirm
13. Press or to adjust the OFF Minute time, press Enter to Confirm
Press Enter to modify Programme P2, follow steps 5-12, Press to skip to P3
Press Enter to modify Programme P3, follow steps 5-12, Press to Skip to P4
Press Enter to modify Programme P4, follow steps 5-12
To copy newly programmed P1-P4 heating programmes to other days, press and hold ADV button COPY
will be displayed then navigate UP/DOWN buttons to other days, while the day flashing press and hold
ENTER button to paste, PASTE will be displayed to confirm the setting.
Press BACK button user timer screen is displayed, navigate UP/DOWN button to flash ON and press
ENTER to confirm the user timer setting. During this setting product will turn off and turn on for the time
you selected.
To turn of the User timer, activate the remote control, OFF flashes. Press ENTER to confirm.


Produktspezifikationen

Marke: Dimplex
Kategorie: Nicht kategorisiert
Modell: ALM20E

Brauchst du Hilfe?

Wenn Sie Hilfe mit Dimplex ALM20E benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Dimplex

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-