Dimension BST 768 Bedienungsanleitung
Dimension
3D-Drucker
BST 768
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dimension BST 768 (68 Seiten) in der Kategorie 3D-Drucker. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/68
BST 768 / SST 768
User Guide
2
Dimension BST 768 / SST 768 User Guide
Notice
The information in this document is subject to change without notice.
STRATASYS, INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATE-
RIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Stratasys, Inc. shall not be liable
for errors contained herein or for incidental or consequential damages in connection with
the furnishing, performance, or use of this material.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Changes or modifications to the Dimension system not expressly approved by Stratasys,
the party responsible for compliance, could void the user’s authority for use.
This document is protected by copyright. All rights reserved. Its use, disclosure, and
possession are restricted by an agreement with Stratasys per software copyright. No part
of this document may be photocopied, reproduced or translated into another language
without the prior written consent of Stratasys, Inc. Printed in the USA.
Stratasys, Dimension, and Catalyst are registered trademarks of Stratasys, Inc.
Krytox, Windows 2000, and Windows XP are registered trademarks of their respective
companies.
© Copyright 2006 Stratasys, Incorporated.
April 2006
The Dimension system conforms with the following standards, in
accordance with the EU Machinery, Low Voltage and Electromagnetic
Compatibility Directives: EU 89/392/EEC, EU 98/37/EEC, EU 73/23/EEC
amended by 93/68/EEC, EU 89/336/EEC
3
Dimension BST 768 / SST 768 User Guide
Introduction
Dimension is designed with ultimate simplicity in mind. The system
enables you to build parts quickly, even if you’ve never used a 3D
printer before. Its display panel prompts you to press a few keys to
get you modeling quickly.
The system models with ABS plastic, so modeled parts are strong
and durable. ABS also ensures you’ll be able to drill, tap, sand, and
paint your creations. With the speed and convenience of
Breakaway Support Technology (BST) or Soluble Support
Technology (SST), your completed parts are quickly available for
review and test.
Dimension is an innovative combination of proprietary hardware,
software, and material technology.
Congratulations…
you’ve made a smart choice!
Produktspezifikationen
| Marke: | Dimension |
| Kategorie: | 3D-Drucker |
| Modell: | BST 768 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Dimension BST 768 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung 3D-Drucker Dimension
3 August 2024
Bedienungsanleitung 3D-Drucker
- 3D-Drucker Anker
- 3D-Drucker Exibel
- 3D-Drucker Velleman
- 3D-Drucker Renkforce
- 3D-Drucker Polaroid
- 3D-Drucker Weller
- 3D-Drucker Kodak
- 3D-Drucker CraftBot
- 3D-Drucker Flashforge
- 3D-Drucker German RepRap
- 3D-Drucker Monoprice
- 3D-Drucker Sindoh
- 3D-Drucker Bq
- 3D-Drucker Easy Threed
- 3D-Drucker GooVer
- 3D-Drucker MakerBot
- 3D-Drucker PP3DP
- 3D-Drucker XYZprinting
- 3D-Drucker Leap Frog
- 3D-Drucker Wasp
- 3D-Drucker Anycubic
- 3D-Drucker 3D Systems
- 3D-Drucker LulzBot
- 3D-Drucker Snapmaker
- 3D-Drucker Creality3D
- 3D-Drucker Creality
- 3D-Drucker Raise3D
- 3D-Drucker Wanhao
- 3D-Drucker Artillery
Neueste Bedienungsanleitung für -Kategorien-
27 September 2024
5 September 2024
4 September 2024
3 September 2024
3 September 2024
2 September 2024
2 September 2024
1 September 2024
31 August 2024
31 August 2024