Digitus DA-90389 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Digitus DA-90389 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂŒr 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
DIGITAL CONTROL PANEL
FOR ELECTRIC HEIGHT
ADJUSTABLE DESK
Installaon Instrucon & User Guide
DA- - -90390 90388 ‱ DA 90389 ‱ DA
1
1. Operang Control Panel
A
Timer
E
Memory 1 / 2 / 3
B
Memory/Screen lock (unlock)
F
Display
C
Downward movement
G
Indicator light
D
Upward movement
Operaon Instrucon:
Height Adjustment:
Press and hold the up/down buon to li/lower the desk.
Press and release the buon to li/lower the desk precisely.
Timer:
The mer is designed to inform users to stand up aî…€er a set period of me. Press the “T”
buon to set the period of me. The display will ash “0.5 h” for 0.5 hour. Each press of the
“T” buon leads to a 0.5 hour increment. The maximal seng of me is 2 hours. When the
display stops î…Œashing, then the period of me is successfully set. And the indicator light on the
top right of panel will be on.
When the set me is up, the buzzer will beep to remind the users. The mer will turn o
automacally aer ve beeps. To cancel the ming, press “T” buon for 5 mes unl the
display shows the current height and the indicator light is o.
2
Memory Seng:
Adjust the desk to your desired posion. Press the "M" buon, then "S-"appears on the
display. Meanwhile press "1","2" or "3", the memory is successfully set. Press "1", "2" or "3"
to get to the programmed memory posion. Press any buon to stop the moon.
Screen Lock/Unlock:
Note: To auto-lock/lock/unlock, please ensures the lockable display funcon is ON rst. For this
CT-08 touch digital Custom control, screen lock funcî†Șon is ON by default. Refer to “PART 3 –
Programming Guide” and change the screen lock seng.
 Auto-lock: When no acons are made for over 1 minutes, the screen will lock automacally
and the display shows“---”.
 To lock: press "M" for 3s and the display shows " ". ---
The screen has been locked and any operaon is invalid.
 To Unlock: press "M" for 3s and the display shows the current height.
Changing between CM and INCH:
Press "T" for 8s. From "cm" to "inch",beeps twice. From "inch" to "cm" beeps once.
Reset Mode:
Press "UP" and "DOWN" simultaneously unl the buzzer beeps.
(The desk will move down to the lowest posion then raise a lile. Please make sure you never
release the buon during the process.)


Produktspezifikationen

Marke: Digitus
Kategorie: Nicht kategorisiert
Modell: DA-90389

Brauchst du Hilfe?

Wenn Sie Hilfe mit Digitus DA-90389 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Digitus

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂŒr -Kategorien-