Delta Dore Tybox 117 Bedienungsanleitung
Delta Dore
Thermostate
Tybox 117
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Delta Dore Tybox 117 (2 Seiten) in der Kategorie Thermostate. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
www.deltadore.com
AUTO
TYBOX 117 - 127 - 137 - 147 - 157
08/19
> 5s
PROG
x1
PROG
x7
Important product
information ( )❹
1
31
1
12
0
23
0
59
2012 ...
1
2
3
4
5
8
9
10
11
12
6
7
EXIT
5°C
30°C
5°C
30°C
5°C
16°C
3
2
4
5
6
7
8
9
EXIT
1
6h 8h 24h0h 17h 23h
h (ON)
023
4
5
i
6h 8h 0h0h 17h 23h15h30
5°C
30°C
2
3
1
Press me
Room temperature
Set-point temperature
Daily programming
Weekly programming
Time setting
Turn the selector dial to .
The days ash.
Press + or - to select the day, then press OK
to conrm and move on to the next setting.
Repeat the process to set
the hours and minutes.
Adjusting the
Comfort
setting (from 5
to 30°C in 0.5°C
increments)
Conrm
Conrm
Conrm ConrmAdjusting the
Economy setting
(from 5 to 30°C in
0.5°C increments)
Adjusting the
Frost
Protection setting
(from 5 to 16°C in
0.5°C increments)
To exit the mode,
turn the selector dial.
In automatic mode, manual override can be used to switch
from Comfort to Economy (or vice versa) until the next change
of programme
If you wish to cancel the override that is currently
active, press the button again.
At 5pm, the programme will return to the normal
schedule.
E.g.: it is 15:30 and you would like to switch to
Comfort mode before the set time (17:00).
Press the button Override currently active
In AUTO mode, pressing the i button displays the room temperature or the temperature setting,
depending on the conguration during installation.
Set-point Temperature Setting
Manual mode Override
Operating hours counter (boiler)
Room temperatureSet-point temperature
Information button
Interval before maintenance
of the boiler
Return to
automatic mode
Turn the selector dial to AUTO.
Your thermostat follows the programme.
Depending on the conguration during installation,
your device will constantly display the temperature
setting or the room temperature. To change these
settings, refer to the»installation guide» or contact
your installation engineer.
This mode is used to choose a set-point
temperature that remains constant.
Turn the selector dial to .
To cancel the current manual mode, turn the
selector dial.
PROG
1
3 4
2
STOP
Alkalines 1,5V
LR03 (AAA)
6h 8h 24h0h 17h 23h
COPY
2 7
2 7
>3s
EXIT
EXIT
PROG x1
PROG x7
1
3
2
PROG x 1
PROG x 7
A
B
1 31 1 12 2012 ...
18/02/2012
00.00
Press the buttons or to
create your different Economy
or Comfort periods.
Setback period Comfort period
Press
until 06.00.
Press
until 06.00.
Press
until 08.00.
Press
until 08.00.
Press
until 17.00.
Press
until 17.00.
Press
until 23.00.
Press
until 23.00.
Press
until 00.00.
Press
until 00.00.
Conrm
To exit the mode,
turn the selector dial.
Repeat for each
day of the week.
To exit the mode,
turn the selector dial.
Conrm
OR
Conrm and continue on to the next day to program
it separately or conrm the program and copy it to
the next day.
Hold down the OK button for 3 seconds to
conrm the programme you have created
and copy it to the next day.
Repeat for each day of the week.
This mode protects your home from frost if you are absent for several days.
Turn the selector dial and enter the return date.
When the batteries symbol appears. you have
approximately 1 month to change the batteries
(2 1.5 V LR03 or AAA alkaline batteries).
You have approximately 30 seconds to change
the batteries before the time setting is reset
(if this happens, reprogramme the date and time).
This mode is used to switch your heating
installation off. Turn the selector dial to .
In this mode, the device displays the room
temperature.
Enter the return date
The Frost Protection
setting is adjustable
(§ «Setting
temperatures»).
The programme begins
on day 1 (Monday) and at 00:00.
1 : Monday,
•
•
•
7 : Sunday,
Turn the selector dial to PROG.
1. Create your 24-hour programme
2. Check your program
Press to check the Comfort and
Economy periods you have created.
Press OK to check the next day.
Exemple : Comfort from 6:00 to 8:00 and from 17:00 to 23:00
The programme may be weekly (PROGx7) or daily
(PROGx1). This choice is made using the switch on the
back of the device.
This programming can also be done in one-hour, half-
hour, or quarter-hour stages.
If you wish to change these settings, refer to the
«installation guide» or contact your installation engineer.
The programming may be done in increments of one hour, 30 minutes, or 15 minutes (refer to the “installation guide”, menu 1-02).
To change the mode in progress, press OK again.
To cancel the current absence mode, turn the selector dial.
Conrm Conrm Conrm
Return to AUTO
mode at the end of
the countdown, at
00:00.
Produktspezifikationen
| Marke: | Delta Dore |
| Kategorie: | Thermostate |
| Modell: | Tybox 117 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Delta Dore Tybox 117 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Thermostate Delta Dore
11 Juli 2024
Bedienungsanleitung Thermostate
- Thermostate AEG
- Thermostate Siemens
- Thermostate EMOS
- Thermostate Renkforce
- Thermostate Elro
- Thermostate Vaillant
- Thermostate Honeywell
- Thermostate Junkers
- Thermostate Zehnder
- Thermostate Theben
- Thermostate Aermec
- Thermostate Coati
- Thermostate Sygonix
- Thermostate Orbis
- Thermostate Eberle
- Thermostate BTicino
- Thermostate Danfoss
- Thermostate Fantini Cosmi
- Thermostate Grässlin
- Thermostate Heimeier
- Thermostate Oventrop
- Thermostate Salus
- Thermostate Seitron
- Thermostate Drayton
- Thermostate Emerson
- Thermostate ICY
- Thermostate Plieger
- Thermostate Watts
- Thermostate Horstmann
- Thermostate Heatmiser
- Thermostate White Rodgers
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
15 Oktober 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024
12 Oktober 2024
11 Oktober 2024
11 Oktober 2024