Dell W-AP105 Bedienungsanleitung

Dell Nicht kategorisiert W-AP105

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dell W-AP105 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

AP-105 Mounting Kit

Installation Guide

0510651-02 | July 2010 1

Introduction

The AP-105 Wall Mounting kit provides two options, with built-in security features, for mounting your

AP-105 to a wall. Use the Box Mount Bracket to install the AP over wall box and use the Wall Mount

Bracket to install the AP directly on a wall.

The kit includes the following:

z1x plastic Box Mount Bracket

z1x plastic Wall Mount Bracket

Figure 1 AP-105-MNT

Figure 2 AP-105-MNT-DC

Required Tools

zA screwdriver that matches the screws used for mounting your brackets.

zAn M5 (Metric) or 3/16" (Standard) hex key.

N O T E

This installation guide pertains to both the AP-105-MNT and AP-105-MNT-DC. The AP-105-MNT can only be

used with an AP that is powered by Power Over Ethernet (PoE), while the AP-105-MNT-DC allows the use of a

DC power source.

AP105_008

Box Mount Bracket Wall Mount Bracket

AP105_008

Wall Mount Bracket

Box Mount Bracket

2 AP-105 Mounting Kit | Installation Guide

Installation

1. Before securing your mount to a double-gang box or directly to the wall, route the ethernet cable

through the openings show in Figure 3.

Figure 3 Cable Routing

2. Install your mounting bracket.

For the Wall Mount Bracket (Figure 4):

a. Before installing your Wall Mount Bracket, install the appropriate wall anchors. Screws and wall

anchors are not included.

b. Align the screw holes in the mount with the holes or anchors on the wall.

c. Insert the screws and tighten them to secure your Wall Mount Bracket.

Figure 4 Wall Mount Bracket Installation

For the Box Mount Bracket:

a. Align the screw holes in the mount with the those in the gang box, as shown in Figure 5.

b. Insert the screws and tighten them to secure your Box Mount Bracket.

AP105_010

Box Mount Bracket Cable Route

to ENET Port

Cable from

Gang Box

Wall Mount Bracket

AP105_012

N O T E

If you plan to permanently connect a serial console cable to the AP installed over a gang-box, you must use the

Wall Mount Bracket instead of the Box Mount Bracket. This provides the necessary space behind the AP to run

both cables.

AP-105 Mounting Kit | Installation Guide 3

The box mount bracket can also be installed over a double-gang wall box. Use the same steps as above

to install it over a double-gang wall box, however the installation requires a third screw. For more

details, see Figure 6.

Figure 5 Box Mount Bracket Installation (Single-gang Box)

Figure 6 Box Mount Bracket Installation (Double-gang Box)

AP105_011

Produktspezifikationen

Marke:	Dell
Kategorie:	Nicht kategorisiert
Modell:	W-AP105
Breite:	135 mm
Tiefe:	45 mm
Gewicht:	300 g
Höhe:	132 mm
AC Eingangsspannung:	12 V
Gleichstrom-Anschluss (DC):	Ja
Netzstandard:	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Zertifizierung:	WLAN
Stromverbrauch (Standardbetrieb):	12.5 W
Power over Ethernet (PoE):	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Maximale Datenübertragungsrate:	300 Mbit/s
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
2,4 GHz:	Ja
Zahl der Benutzer:	10 Benutzer
Anzahl Kanäle:	2 Kanäle
Antenne Zunahmeniveau (max):	4.5 dBi
Anzahl der Antennen:	4
Eingebaut:	Nein
Frequenzband:	2.4 - 5 GHz
5 GHz:	Ja
Antennenfunktionen:	Integrierte Antenne
Modulation:	16-QAM, 64-QAM, BPSK, CCK, DSSS, OFDM, QPSK
Antennenrichtungsart:	Mit kugelförmiger Richtcharakteristik