Definitive Technology Mythos SSA-50 Bedienungsanleitung
Definitive Technology
Soundbar
Mythos SSA-50
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Definitive Technology Mythos SSA-50 (4 Seiten) in der Kategorie Soundbar. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
Unpacking Your SSA Speakers
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible or concealed
damage most likely occurred in handling after it left our plant and should be reported
at once to your Definitive dealer or the delivery company that delivered your loud-
speaker. Please unpack your system carefully. Save all cartons and packing materials in
case you move or need to ship your system. Recor the serial number found on thed
back of the Mythos SSA in the appropriate place on the product registration card,
answer all questions and send it in.
VERY IMPORTANT: Accessories
Various parts and accessories that you will need to use your Mythos SSA are in the
carton but are easy to overlook. Open both ends of the shipping carton. Carefully
examine the contents of the shipping carton and packing material to find the plastic
bags with accessories.
Specifications
SSA-50
Dimensions: 461/4" W (117.45 cm) x 41/8" D (10.48 cm) x 53/8" H (13.65 cm)
(speaker only, not including bracket)
Driver Complement: Three 41/2"(11.4 cm) BDSS High-output drivers with coincident
array 1" ferro-magnetic fluid damped pure aluminum (25 mm)
dome tweeter.
Two 41/2"(11.4 cm) BDSS High-output full-range drivers.
Four 31/
4"(8.3 cm) full-range high-output surround drivers
with butyl rubber surrounds.
Frequency Response: 50 Hz – 30 kHz
Nominal Impedance: 8 Ohms
Rec. Assoc. Amplification: 20 – 200 Watts/channel
Sensitivity: 90 dB
Weight: 31 lbs. (4.52 kG)
Specifications subject to change without notice.
Definitive Technology
SSA-50
OWNER’S MANUAL
Mythos Solo Surround Array Loudspeakers
Thank You
Thank you for choosing the Definitive Technology Mythos Solo Surround Array
Loudspeaker System. The Mythos SSA-50 is a unique speaker that provides a stunning
5-channel surround experience from just one speaker. This extraordinary speaker
makes enjoying a high performance surround audio system more convenient than
ever before. You chose wisely.
Our engineers spent many years developing this product. In order to ensure that you
experience the finest performance possible, we encourage you to take a moment to fully
read this owner’s manual and familiarize yourself with the proper installation and set-up
procedures for your Mythos SSA-50 speaker.
Definitive Technology
SSA-50
OWNER’S MANUAL
5. Use a bubble level to make sure the template is level. If the
TV is wall mounted and not level, the speaker will look better
if it is off-level in exactly the same way as the TV.
6. Use push pins to secure the template to the wall.
7. Mark the location of pilot holes noted on the Mounting
Template with a pencil; remove the template.
8. Pre-drill the pilot hole locations for mounting screws
(not included). Use screws rated to hold securely in the
wall material (we recommend #10 screws).
9. It is best if at least one screw hits wall stud. If ther is no a e
stud behind the pilot hole location, install wall anchors (not
included) to secure the bracket screws. Follow the wall anchor
manufacturer’s directions. Each wall anchor should be rated
to hold at least one-half of the product net weight
[see specifications on front cover].
10. For masonry walls, use a masonry drill bit to pre-drill holes,
and use masonry anchors and screws (not included).
11. Pull the five sets of speaker wires through the hole in the bracket.
12. Screw the bracket to the wall.
Wall Mounting the SSA
• We recommend that the SSA speaker be wall mounted
by professional installers or by those appropriately skilled in the
use of power tools and who have knowledge of building codes
and structural issues.
• We recommend that you determine a suitable location for
your speaker installation, and that you complete all wiring
(especially “hidden” in-wall wiring) before mounting the
bracket to your wall.
• Mythos Brackets are not suitable for ceiling mounting.
The Mythos Solo Surround Array loudspeaker comes with a wall
mounting bracket and template that makes secure mounting a breeze.
Follow these directions for installing the wall mounting bracket.
1. Two 1
⁄4"–20 screws have been factory installed on the back of the
speaker. Gently hand-tur the screws to make sur they ar in asn e e
far as they can go. Do not force them beyond the “stop” point.
The screws cannot screw all the way into the speaker and should
protrude as shown in the illustration.
2. Make sure the location you have selected for wall-mounting
does not conceal behind-wall electrical wiring or plumbing.
3. Hold the cardboard template (included) in the intended
location. Make sur the speaker clears the ceiling, adjacent e
walls, corners, beams, lighting fixtures and door/window
frames. Leave at least 11/2
" (38 mm) above the speaker location
to allow the speaker to slide down onto the bracket.
4. Make sure the center of the template is perfectly centered with
the TV screen.
Positioning the SSA
The SSA speaker may be mounted on
the wall above or below the video screen.
It may be placed on a table or shelf
in front of the TV.
If placed on a shelf under a TV, adjust the
leveling feet (screwed all the way in) to
aim the speaker up towards the listeners.
The SSA speaker may be placed directly
on top of TVs that have at least 5-inches
(13 cm) of flat surface on top. Do not
place the SSA speaker on top of any
surface that is not large or stable enough
to securely support the speaker. If the
speaker seems at all unstable or “tipsy”
place the speaker somewhere else. The
warranty does not cover damage
caused by falls due to improper
positioning of the speaker. If the
speaker is above seated listener height,
extend the leveling feet to point the
speaker downward [See Using the Leveling
Feet on page 3].
BACK OF SPEAKER
T OP OF SPEAKER
1
/ " –
4
20 SCREWS
THRE NSERTSADED I
2
Even if you intend to place the SSA speaker on a TV or shelf you must attach the wall-mount bracket to the speaker. See Using the Leveling Feet on page 3.
13. When the wall mounting bracket is securely screwed to the wall, line
up the speaker’s protruding Mounting Screws with the keyhole slots
on the wall mounting bracket. Let the speaker slide straight down,
allowing the screw heads to slip behind the smaller end of the keyhole
slots. Gently push the bottom front edge of the speaker toward the wall
until the speaker snaps onto the lower lip of the bracket.
Mounting the SSA to an articulating TV bracket
If you have a Plasma or LCD TV that is attached to the wall via a
swing-out articulating bracket such as those offered by Chief, Sanus
and OmniMount, the SSA speaker may be attached to the bracket
without using the SSA wall-mount plate. Simply use 1
⁄4"–20 screws to
attach the SSA speaker directly to the TV bracket. Consult the TV
bracket manufacturer’s user manual for mor specific speaker e
mounting instructions.
Using the Leveling Feet
If you are going to use the speaker on a TV, shelf or table, first attach
the wall-bracket to the speaker as described above. Attach the two “L”
brackets to the wall-bracket using two M4 x 10 mm screws provided.
Thread the foot screws into the two “L” brackets and adjust to the
required height.
Connecting the SSA
Your Mythos SSA has one pair
of 5-way binding posts for each
channel — Left Front, Right Front,
Center, Left Surround
and Right Surround.
To start, strip 1/2" (3 mm) of
insulation from each speaker
wire to expose the bare metal
wire and twist each of the
individual conductors into
single un-frayed strands.
Note that one of the terminals for
each channel is marked with red
band (+) and the other is marked
with black band (–). Make certain
that you connect the wire from the
red (+) terminal of your amplifier
or receiver to the red (+) terminal on your speaker and the wire from the
black (–) terminal of your amplifier or receiver to the black (–)
terminal on your speaker. Most speaker wire has some indicator (such as
color-coding, ribbing or writing) on one of the two conductors to help you
maintain consistency. It is essential to connect all channels
of the speaker to the amplifier in the same way (in phase). If you
experience a poor surround effect, it is likely that one or more of the chan-
nels is connected in incorrect polarity and needs to be rewired.
Pay close attention and connect positive to positive; negative to
negative on all channels.
If you have a 6.1 or 7.1 channel receiver, connect the SSA’s surround
channel inputs to the “Surround” outputs of your receiver, not the
“Rear” or “Surround Back” outputs.
To connect wire to the binding post [see figure above], unscrew the knurled
nut and inser the bar into the hole near the base of the bindingt e wire
post. Do not inser the insulated par of the wir into the hole as this willt t e
not give you a good connection. Twist the nut back down the binding post
until it firmly meets the wire. Do not over tighten.
Connect a single RCA cable from the “SUB OUT” of your receiver
to the LFE input of the subwoofer (not included). This connecting
method bypasses the subwoofer’s internal “crossover” or low pass
filter and relies on the crossover filter built into your receiver.
NOTE: Make no other signal connections. Do not use speaker wire to make
the connection to the subwoofer
SSA-50
OWNER’S MANUAL
SUBWOOFER
95
15040
Variable
Low Pass Crossover
120V 80Hz T 3.2A L 250V
Aut matic
P er
O FFN
P r o C i n e m a
S u b w o f e ro
A c ti v e C r o s o v e rs
a n d P o w e r A m p l i f i e r
High Leve l
+
+
–
–
Left R ight
®
LFE
IN
In
Out
RECEIVER
AUDIO
AUDIO
MULTI INPUT
SUBWOOFER
(LFE)
OUTPUT
COMPONENT VIDEO
FRON LEFT FRON IGHT SURROUND RIGHTT T R
CENTER
SURROUND LEFT
IMPEDAN ELECTORCE S
VIDEO
SSA-50
FRONT
RIGHT
CENTER
+–
+
–
+–+
+
–
–
+–
SURROUND
RIGHT
FRONT
LEFT
SURROUND
LEFT
SPEAKERS
FRONT
RIGHT
+
–
L LEFT RIGHT EFT
CENTER SU U DRRO N
RIGHT FTLE
SU C /RR. BA K REAR
FT
R
RIG
S
3
Produktspezifikationen
| Marke: | Definitive Technology |
| Kategorie: | Soundbar |
| Modell: | Mythos SSA-50 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Definitive Technology Mythos SSA-50 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Soundbar Definitive Technology
3 September 2024
3 September 2024
16 August 2024
15 August 2024
15 August 2024
11 April 2024
Bedienungsanleitung Soundbar
- Soundbar Samsung
- Soundbar Infiniton
- Soundbar Hama
- Soundbar HP
- Soundbar Medion
- Soundbar Nedis
- Soundbar NGS
- Soundbar Philips
- Soundbar Sony
- Soundbar Trust
- Soundbar Panasonic
- Soundbar LG
- Soundbar OK
- Soundbar Yamaha
- Soundbar Yealink
- Soundbar Technaxx
- Soundbar Denver
- Soundbar König
- Soundbar Renkforce
- Soundbar Thomson
- Soundbar Trevi
- Soundbar Blaupunkt
- Soundbar Grundig
- Soundbar Schneider
- Soundbar Sharp
- Soundbar Pyle
- Soundbar Haier
- Soundbar Hisense
- Soundbar Aiwa
- Soundbar Auna
- Soundbar Bang And Olufsen
- Soundbar Bose
- Soundbar Lenco
- Soundbar Creative
- Soundbar Denon
- Soundbar Edifier
- Soundbar Fantec
- Soundbar JBL
- Soundbar JVC
- Soundbar Klipsch
- Soundbar Krüger And Matz
- Soundbar Muse
- Soundbar Onkyo
- Soundbar Sennheiser
- Soundbar Teufel
- Soundbar Megasat
- Soundbar Akai
- Soundbar Continental Edison
- Soundbar GoGEN
- Soundbar TCL
- Soundbar Livoo
- Soundbar Kärcher
- Soundbar Element
- Soundbar Bigben
- Soundbar Dell
- Soundbar Boston Acoustics
- Soundbar Canton
- Soundbar Dali
- Soundbar Harman Kardon
- Soundbar Magnat
- Soundbar Razer
- Soundbar ICES
- Soundbar Xoro
- Soundbar Adj
- Soundbar Vision
- Soundbar NEC
- Soundbar Monoprice
- Soundbar Cambridge
- Soundbar Sherwood
- Soundbar Jamo
- Soundbar Mac Audio
- Soundbar Kogan
- Soundbar Energy Sistem
- Soundbar Sylvania
- Soundbar Altec Lansing
- Soundbar Insignia
- Soundbar Majority
- Soundbar Reflecta
- Soundbar Sonos
- Soundbar Boss
- Soundbar Peerless-AV
- Soundbar Kicker
- Soundbar AV:link
- Soundbar Polk
- Soundbar Sonance
- Soundbar ELAC
- Soundbar Furrion
- Soundbar Sven
- Soundbar Bluesound
- Soundbar BlueAnt
- Soundbar Devialet
- Soundbar Ematic
- Soundbar Energy
- Soundbar FALLER
- Soundbar GPX
- Soundbar ILive
- Soundbar Laser
- Soundbar Legamaster
- Soundbar Libratone
- Soundbar Logic3
- Soundbar Maxell
- Soundbar Monitor Audio
- Soundbar Mtx Audio
- Soundbar Naxa
- Soundbar Orbitsound
- Soundbar Paradigm
- Soundbar Pure Acoustics
- Soundbar Q Acoustics
- Soundbar Roku
- Soundbar Selfsat
- Soundbar Steren
- Soundbar AMX
- Soundbar Vifa
- Soundbar Vizio
- Soundbar Wharfedale
- Soundbar Thonet & Vander
- Soundbar Proscan
- Soundbar Martin Logan
- Soundbar Nevir
- Soundbar Astell&Kern
- Soundbar Wet Sounds
- Soundbar Seura
- Soundbar GoldenEar Technology
- Soundbar EKO
- Soundbar Audac
- Soundbar SunBriteTV
- Soundbar Neets
- Soundbar Crestron
- Soundbar PowerBass
- Soundbar MusicMan
- Soundbar GOgroove
- Soundbar PSB
- Soundbar Bazooka
- Soundbar Bigben Interactive
- Soundbar Memphis Audio
- Soundbar Integra
- Soundbar Edis
- Soundbar Klip Xtreme
- Soundbar Fosi Audio
- Soundbar Planet Audio
- Soundbar Kubo
- Soundbar Avtex
- Soundbar Voxicon
- Soundbar Aconatic
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
29 September 2024
26 September 2024
24 September 2024
21 September 2024
13 September 2024
12 September 2024
11 September 2024
11 September 2024
10 September 2024