Deaf Bonce Apocalypse ASA-2000.2 Bedienungsanleitung

Deaf Bonce niet gecategoriseerd Apocalypse ASA-2000.2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Deaf Bonce Apocalypse ASA-2000.2 (24 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/24

TWO-CHANNEL AMPLIFIERS

ДВУХКАНАЛЬНЫЕ УСИЛИТЕЛИ

CLASS D

ASA-1000.2 ASA-1500.2 ASA-2000.2 Apocalypse SPORT

Warranty period, after-sales service and service life information

1. Before installing the ampliﬁer disconnect the battery from the electrical system.

2. To connect the ampliﬁer it is necessary to stretch the power cable from the location of the battery to the place of installation

of the ampliﬁer. Select the power cable with the appropriate regulations in AWG (see Table: Selection of the diameter of the

power cables)

3. Connect the power supply with the correct polarity. Connect all (+) terminals of the ampliﬁer to the cables stretching from

the positive terminal of the battery and all (-) terminals of the ampliﬁer – to the cables stretching from the negative terminal of the

battery.

4. Place the fuse holder for each positive cable within 40 cm from the positive terminal of the battery and connect one end of

the power cable to the holder after connecting the other end to the ampliﬁer. Do not install the fuse(s).

5. Route all signal cables next to each other and separately from the power cables.

6. Connect the wires of RCA input. The input signal power must be between 0.2 V and 6 V.

7 To connect the power wire supply is necessary to use special. power cables.

8. Fasten the ampliﬁer properly when installing it in the vehicle. If the component is disconnected during driving, it may cause

serious damage to the passengers of the vehicle or another vehicle. It is not recommended to screw the ampliﬁer directly to the

metal it can lead to distorsions at the signal outputs.

9. After installation is complete, check the wiring of the system and make sure that all connections have been made correctly.

Before installing the fuses, disconnect the positive lead from the battery and then install the fuse in the fuse holder. Using the

light bulb 12 V 21 W, connect the positive lead to one contact of the bulb and the other contact of the bulb to the positive

terminal of the battery.

When properly connected, the bulb must brieﬂy light up and go out. Now you may connect the positive lead to the (+) of the

battery. If the light does not go out, then something is wrong. This will prevent damage to the ampliﬁer in case of reverse polarity

and unwanted sparks when connecting. Install the rest of the fuses.

10 . To activate the ampliﬁer, it is necessary to apply the positive potential of 12 volts to the control input of the ampliﬁer (REM

IN) through a switch or a corresponding control output (REMOTE OUT) with the head unit (HU).

11 LED indicator on front of the ampliﬁer turns . blue to indicate that the ampliﬁer is turned on. If the indicator does not light

up see chapter "Possible faults and their solutions" for more information.

12. The sound level is calibrated by adjusting the volume of the source up to 3/4 of its maximum level. Then, adjust the

sensitivity level of the ampliﬁer up until you hear distortions.

Thank you for purchasing of this Deaf Bonce product! Our company is committed to the creation of extremely loud sound

systems with no loss of quality.

To ensure proper use, please carefully read through this manual before using this product. It is especially important that

you read and observe caution’s in this manual. Please keep the manual in a safe and accessible place for future reference.

Produktspezifikationen

Marke:	Deaf Bonce
Kategorie:	niet gecategoriseerd
Modell:	Apocalypse ASA-2000.2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Deaf Bonce Apocalypse ASA-2000.2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung niet gecategoriseerd Deaf Bonce

Deaf Bonce Apocalypse ASA-2000.2 Bedienungsanleitung

4 September 2024

Deaf Bonce Apocalypse AP-M81AC Bedienungsanleitung

3 September 2024

Deaf Bonce Machete MFX-69 Bedienungsanleitung

3 September 2024

Deaf Bonce Hannibal HM-6E Bedienungsanleitung

3 September 2024

Deaf Bonce Apocalypse AP-X69A Bedienungsanleitung

3 September 2024

Deaf Bonce Machete MFH-69 Bedienungsanleitung

3 September 2024

Deaf Bonce Machete MFH-80 Bedienungsanleitung

3 September 2024

Deaf Bonce Apocalypse AP-W81AC Bedienungsanleitung

3 September 2024

Deaf Bonce Machete MFT-25 Bedienungsanleitung

3 September 2024

Deaf Bonce Machete MFX-60 Bedienungsanleitung

3 September 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-

APC C2C Bedienungsanleitung

18 September 2024

APC AP7868 Bedienungsanleitung

18 September 2024

APC P8VNTG Bedienungsanleitung

18 September 2024

APC P62 Bedienungsanleitung

18 September 2024

APC AP7898 Bedienungsanleitung

18 September 2024

Hama Magnet 00183283 Bedienungsanleitung

18 September 2024

IFM TD2211 Bedienungsanleitung

18 September 2024

Coyote C1CH36FS Bedienungsanleitung

18 September 2024

IFM AC001S Bedienungsanleitung

18 September 2024

Dimplex SRX120EM Bedienungsanleitung

18 September 2024