Darkglass Alpha·Omega 500 Bedienungsanleitung

Darkglass Nicht kategorisiert Alpha·Omega 500

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Darkglass Alpha·Omega 500 (10 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
OWNERS M ANUAL
The Alpha·Omega 500 is a 500W amplier equipped
with an all-analog preamplier, Class D Power Module
and a digital impulse based cabinet emulator for DI
outputs or headphones.
Probably the rst thing you will notice from the
Alpha·Omega 500 is its unusual control layout: On the
right side youll nd the clean section which is the
foundation of your sound.
It features a Master volume and active 6 band graphic
EQ. Along with the mandatory Low and Treble controls
you will nd 250Hz, 500Hz, 1.5KHz, 3KHz sliders.
Character is all in the midrange. Having 4 dedicated
Mid controls allows you to cover the whole mid range
(250Hz to 3kHz) to have total control and exibility
over the ampliers character.
On the left side, by the input jack you will nd the
Alpha·Omega Engine which acts as an extra channel.
This creation differs greatly from our previous
preampliers and overdrives: its operational-amplier
topology featuring two distinct distortion circuits
(Alpha and Omega), which can be selected or blended
using our Mod knob, make the Alpha · Omega® the
DESCRIPTION
most exible among our designs.
The Alpha·Omega Engine can be engaged from the
front panel or via our own digitally controlled
Intelligent Footswitch (jack on rear panel). Besides
engaging the Alpha·Omega circuitry you can hold the
actuator to Mute the amplier.
The Intelligent Footswitch is housed in an elegant,
laser-engraved unibody chassis and requires a
standard ¼ mono cable (not included) for its full
operation.
This deceivingly simple feature allows for maximum
power adaptability: Regardless of the cabinet
conguration or power requirements, the Alpha· Omega
500 will deliver accordingly.
FEATURES
FRONT PANEL
INPUT : Use this jack to connect your instrument via a
standard ¼ mono cable.
PASSIVE/ACTIVE : Use this push-button switch to
change from passive to active mode. If your bass is
active it can have a hotter signal making the amp to
distort early (feel free to use if such additional
distortion is desired).
DISTORTION: Use this push button to turn on or off the
Alpha·Omega Engine to add natural compression,
organic harmonic enhancement, and saturation
ranging from mild overdrive to high gain bass rage.
The Alpha·Omega Engine operates before the clean
section (you can therefore use the 6-Band Active EQ for
additional tone shaping).


Produktspezifikationen

Marke: Darkglass
Kategorie: Nicht kategorisiert
Modell: Alpha·Omega 500

Brauchst du Hilfe?

Wenn Sie Hilfe mit Darkglass Alpha·Omega 500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Darkglass

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-