Dahua Technology N42B2P3 Bedienungsanleitung

Dahua Technology Videoaufzeichnungen N42B2P3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Dahua Technology N42B2P3 (14 Seiten) in der Kategorie Videoaufzeichnungen. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/14

Lite Series 4K Network Video Recorder

N42B1P / N42B2P / N42B3P

Quick Start Guide

V .0.1 ersion 1

Dahua Technology USA Inc.

Table of Contents

1 1 Welcome........................................................................................................................

1.1 Important Safeguards and Warnings ................................................................. 1

Electrical safety ................................................................................................. 1

Environmental Precautions ............................................................................... 2

Operation and Daily Maintenance ..................................................................... 2

Lithium Battery Disclaimer 2................................................................................

Warnings ........................................................................................................... 3

1.2 FCC Information ................................................................................................ 3

FCC compliance： ............................................................................................ 3

1.3 Legal Notices .................................................................................................... 3

Trademarks ....................................................................................................... 3

1.4 Disclaimer ......................................................................................................... 3

2 4 Unpacking......................................................................................................................

3 NVR Components.......................................................................................................... 5

3.1 Front Panel 5.......................................................................................................

3.2 Rear Panel ........................................................................................................ 5

N42B1P ............................................................................................................. 5

N42B2P ............................................................................................................. 5

N42B3P ............................................................................................................. 6

4 Installing the Hard Drive ................................................................................................ 7

5 NVR Setup..................................................................................................................... 8

5.1 Making Connections .......................................................................................... 8

5.2 Logging In ......................................................................................................... 8

6 9 Smart Add......................................................................................................................

7 Adding a Remote Device............................................................................................. 10

8 Accessing the NVR via the Web.................................................................................. 11

1 Welcome

This manual offers reference material and general information about the basic operation,

maintenance, and troubleshooting of the Dahua Video Recorder. Read, follow, and HCDVI Digital

retain the following safety instructions. Heed all warning on the unit and in the operating instructions s

before operating the unit. Keep this for future reference. guide

1.1 Important Safeguards and Warnings

Electrical ety saf

• Install the unit in accordance with the manufacturer’s instructions and in accordance with

applicable local codes.

• All installation and operation conform to your local electrical safety codes. must

• Do not overload outlets and extension cords, which may cause fire or electrical shock.

• Do not place the camera near or in a place where the camera may contact overhead power lines,

power circuits, or electrical lights.

• All input/output ports are circuits. Ensure that SELV circuits are connected only toSELV other

SELV circuits.

• Ground the unit using the ground connection of the power supply to protect the unit from damage,

especially in damp environments.

• Protect the plug and power cord from foot traffic, being pinched, and its exit from the unit.

• Units with or without an ON/OFF switch have power supplied to the unit whenever the power

cord is inserted into the power source; however, the unit is operational only when the ON/OFF

switch is in the ON position. The power cord is the main power disconnect device for switching

off the voltage for all units.

• Operate the unit only from the type of power source indicated on the label. Before proceeding,

disconnect the power from the cable to be installed into the unit.

• For external power supplied units, use only the recommended or approved power supplies.

• Limited power sources must comply with EN 60950. Substitutions may damage the unit or

cause fire or shock.

• For 24 VAC units, voltage applied to the unit’s input power should not exceed ±25%. User-

supplied wiring must comply with local codes (Class 2 power levels). Do not ground the

supply at the terminals or at the unit’s power supply terminal.

• Contact the local dealer or the power company to verify the correct power supply.

• Do not attempt to service the unit. Opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified personnel.

• If the unit is damaged and requires service, unplug the unit from the main power supply and refer

to qualified service personnel. Damage may include, but is not limited to:

• The power supply cord or plug is damaged.

• Liquid has spilled in or on the unit.

• An object has fallen on the unit.

• The unit has been dropped and the housing is damaged.

• The unit displays a marked change in performance.

• The unit does not operate in the expected manner when the user correctly follows the proper

operating procedures.

• Ensure a service technician uses replacement parts specified by the manufacturer, or that have

the same characteristics as the original parts. Unauthorized parts may cause fire, electrical

shock, or other hazards. Dahua is not liable for any damage or harm caused by unauthorized

modifications or repairs.

• Perform safety checks after completion of service or repairs to the unit.

• Use attachments and accessories only specified by the manufacturer. Any change or

modification of the equipment, not expressly approved by Dahua, could void the warranty.

• Incorporate a readily accessible disconnect device in the building installation wiring for quick

power disconnect to the unit.

• s Dahua assume no liability or responsibility for any fire or electrical shock caused by improper

handling or installation.

Produktspezifikationen

Marke:	Dahua Technology
Kategorie:	Videoaufzeichnungen
Modell:	N42B2P3
Anzahl Prozessorkerne:	4
Breite:	375 mm
Tiefe:	327.5 mm
Gewicht:	2600 g
Produktfarbe:	Schwarz
Höhe:	53 mm
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Anzahl USB 2.0 Anschlüsse:	1
Betriebstemperatur:	-10 - 55 °C
Paketgewicht:	4000 g
Unterstützte Netzwerkprotokolle:	HTTP, HTTPs, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Alarm Server, IP Search
Power over Ethernet (PoE):	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Anzahl HDMI-Anschlüsse:	1
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
Zahl der Benutzer:	128 Benutzer
Temperaturbereich bei Lagerung:	-20 - 70 °C
Unterstützte Videoformate:	H.264, H.265, M-JPEG
Rack-Einbau:	Ja
USB 3.2 Gen 1 (3.1 Gen 1) Anzahl der Anschlüsse vom Typ A:	1
Maximale Auflösung:	3840 x 2160 Pixel
Eingebauter Prozessor:	Ja
Video-Bewegungsmelder:	Ja
Videoverlust-Erkennung:	Ja
VGA (D-Sub)-Ausgangsanschlüsse:	1
Maximale unterstützte Anzahl der HDD:	2
Rack-Kapazität:	1U
Aufnahmezeit:	120 min
Anzahl Power over Ethernet (PoE) Anschlüsse:	8
Insgesamt installierte Speicherkapazität:	3000 GB
Video-Eingangskanäle:	8 Kanäle
Unterstütze Auflösung:	3840 x 2160, 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
Wechselseitiges Gespräch:	Ja
Power over Ethernet (PoE) Leistung pro Anschluss:	25.5 W
Alarm-Eingangskanäle:	4