Ernitec NVR Hybrid Bedienungsanleitung

Ernitec Videoaufzeichnungen NVR Hybrid

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ernitec NVR Hybrid (4 Seiten) in der Kategorie Videoaufzeichnungen. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Fully understand this document before using this device, and

strictly observe rules in this document when using this device. If

you install this device in public places, provide the tip "You have

entered the area of electronic surveillance" in an eye-catching

place. Failure to correctly use electrical products may cause fire

and severe injuries.

It alerts you for moderate dangers which, if not

avoided, may cause minor or moderate injuries.

It alerts you about risks. Neglect of these risks may

cause device damage, data loss, device

performance deterioration, or unpredictable results.

It provides additional information.

ŸStrictly observe installation requirements when installing the

device. The manufacturer shall not be held responsible for

device damage caused by users' non-conformance to these

requirements.

ŸStrictly conform to local electrical safety standards and use

power adapters that are marked with the LPS standard when

installing and using this device. Otherwise, this device may be

damaged.

ŸUse accessories delivered with this device. The voltage must

meet input voltage requirements for this device.

ŸIf this device is installed in places with unsteady voltage, ground

this device to discharge high energy such as electrical surges in

order to prevent the power supply from burning out.

ŸWhen this device is in use, ensure that no water or any liquid

flows into the device. If water or liquid unexpectedly flows into

the device, immediately power off the device and disconnect all

cables (such as power cables and network cables) from this

device.

Precautions Special Announcement

For more information please refer to website.,

ŸAvoid heavy loads, intensive shakes, and soaking to prevent

damages during transportation and storage. The warranty does

not cover any device damage that is caused during secondary

packaging and transportation after the original packaging is

taken apart.

ŸProtect this device from fall-down and intensive strikes, keep the

device away from magnetic field interference, and do not install

the device in places with shaking surfaces or under shocks.

ŸClean the device with a soft dry cloth. For stubborn dirt, dip the

cloth into slight neutral cleanser, gently wipe the dirt with the

cloth, and then dry the device.

ŸDo not jam the ventilation opening. Follow the installation

instructions provided in this document when installing the device.

ŸKeep the device away from heat sources such as radiators,

electric heaters, or other heat equipment.

ŸKeep the device away from moist, dusty, extremely hot or cold

places.

ŸIf the device is installed outdoors, take insect- and moisture-

proof measures to avoid circuit board corrosion that can affect

monitoring.

ŸRemove the power plug if the device is idle for a long time.

ŸAll complete products sold by the manufacturer are delivered

along with nameplates, quick setup guide and accessories after

strict inspection. The manufacturer shall not be held responsible

for counterfeit products.

ŸThe manufacturer will update this manual according to product

function enhancement or changes and regularly update the

software and hardware described in this manual. Update

information will be added to new versions of this manual without

prior notice.

ŸThis manual may contain misprints, technology information that

is not accurate enough, or product function and operation

description that is slightly inconsistent with the actual product,

the final interpretation of company is as a standard.

ŸThis manual is only for reference and does not ensure that the

information is totally consistent with the actual product. For

consistency, see the actual product.

NOTE

ŸIf this device is installed in places where thunder and lightning

frequently occur, ground the device nearby to discharge high

energy such as thunder strikes in order to prevent device

damage.

CAUTION

NOTE

CAUTION

WARNING

Table -2 1 Front panel description

Port Name Description

2 REC

Indicator

Hard disk status indicator.

This indicator flashes when data is transmitted.

4 MOUSE Support connecting to a USB mouse.

5 BACKUP Support connecting to a USB flash drive or USB

removable hard disk.

1 POWER

Indicator

When the XVR is operating, the POWER indicator

is steady on. When the XVR is shut down, the

POWER indicator is turned off.

Open the package, check the appearance of product for no

obvious damage, and confirm the item list for table 1-1 is

consistent.

Table 1-1 Packing list

Open Package Examination

2.1 Device Ports

Different devices may have different ports and multi-head

cables; Please refer to the actual product.

NOTE

D evice Structure2

2 2. Device Dimensions

Different devices may have different dimensions; Please

refer to the actual product.

NOTE

Figure 2-2 Dimensions (Unit: mm)

3 NET

Indicator

The network status indicator.

This indicator flashes when network is working.

Network Video Recorder

Phillips head screw

Power cord

Power adapter

Mouse

Quick Setup Guide

Terminal block

Component

Table -2 2 Rear panel description

Remark

Quantity

Optional

Front panel description of device, please refer to table 2-1.

Rear panel description of device, please refer to table 2-2.

The hard disk of the XVR must be provided by the user. Take the

following steps to install the hard disks：

Step 1 Remove the screws for fixing the cover and take down the

cover.

Step 2 Take out the screws and mount two of them to the screw

holes of hard disk, as shown in figure 3-1.

Figure -3 1 Installing the hard disk screws

3Device Installation

Step 3 Route the screws through the gourd holes on the base,

push the hard disk to the appropriate position on the left, as

shown in figure 3-2.

ŸJust screw the screws about 1 to 2 turns instead to the end.

NOTE

Figure 3-2 Installing hard disk

Step 5 Install other hard disks following step 2,step 3 and step 4,

and insert the hard disk data cable and power cable, then

replace the upper cover and fasten the fixing screws.

Figure 3-3 Fixing hard disk

Name Description

VIDEO IN Port Plug in analog camera by coaxial line.

.langis oediv golana tuptuO TUO SBVC

AUDIO OUT/

AUDIO IN

Audio output / Audio input.

LAN1/LAN2

RJ 45 100/1000 Mbps adaptive Ethernet

interface.LAN1 is deployed default gateway

and used for external network. LAN2 is used

for internal network.

Video output interface.HDMI /VGA

USB USB 2.0 port, Connect USB flash or mouse.

Alarm I/O

Alarm input/Alarm output.

Power switch.

DC12V.

Ground.

PO WE RRE C NE T

4 5

Figure 2-1 Front panel

DC 12V

372

318

3-M3

Step 4 Turn the device over, and mount other two screws to the

holes, as shown in figure 3-3. Then fasten all the screws.

NVR Hybrid

16 channel

Quick Setup Guide

Item no.: 0070-10403-A

Figure 4-3 Topology of the XVR

In some environments, if the power supply is abnormal,

the XVR may not work properly. In severe cases, the XVR

may be damaged. In these environments, it’s advised to

use regulated power supply.

Plug in power to access the XVR user page, the wizard window

would show at first time, user can configure quickly or close it

immediately. For details configuration please refer to main menu.

Use the mouse to right-click any where on the main interface to

access the main menu. Main menu comprises Channel, Record,

Alarm, Network and System settings, as shown in figure 5 1.-

Quick Configuration5

Device Operation

4.1 Startup

Before starting XVR, ensure that the XVR is connected to a power

supply properly and a monitor is connected to the HDMI or VGA

interface of the XVR correctly. After starting the XVR, there is a

CAUTION

.4 2 Topology of the XVR

XVR can access analog cameras immediately when analog

cameras are plugged into XVR’s VIDEO IN ports. Then the XVR

will assign an IP address for each camera automatically. For the

topology refer to figure 4-3.

NOTE

Figure 4-1 Activation interface

Pas sword

5.1 Channel

Channel settings contain Camera, Encode, Sensor Setting, OSD,

Privacy Zone, ROI, Microphone, Human Thermal, Smart,

Intelligent Tracking.

ŸCamera: User can add cameras automatically by clicking Click

to Add, and add manually by clicking Tick cameras then Add.

click Delete to delete cameras. User can batch update software.

Figure 4-2 Login interface

ŸUser needs to create a new password to activate the device, when

ŸUser can also set pattern unlock to quickly login. Set security

ŸChange the language in log in interface.

4.4 Power off

Enter the path Main Menu System Maintenance Shutdown > > > to

power off the XVR.

NOTE

ŸBefore replacing the hard disk, the power must be turned off.

ŸThe special function is only carried by some devices, if the current

device does not have the function, please ignore it.

4.3 Special Function

Click the AI Recognition icon, Human Face, or Thermal

Temperature at the bottom of local UI to enter the AI interface.

User can set and view the AI cameras’ parameters, including

human face, vehicle license plate.

Figure 5-1 Main menu

Figure 7-1 Login

Mobile Client 6

Figure 6-1 P2P

NOTE

and password are same as in the UI interface.

ŸNetwork,802.1X, , and DDNS SNMP interface to set network

parameters.

ŸEmail: Set Emails for sending and receiving alarm messages

and password retrieval message.

ŸPort Mapping: set the ports for remote accessing.

ŸP2P: Add XVR into device list of App by accessing the QR code.

ŸIP Filter: Settings for creating black list or white list.

Ÿ3G/4G: Use 3G/4G modem to plug to XVR provide the network.

ŸPPPoE: Point to point network to access XVR directly.

ŸNetwork Traffic: view the speed of transiting and receiving

data, view the status of LAN.

ŸPlatform Access: Enable to set the parameters of platform

access, so that the XVR can be connected to platform system.

5.6 Live Video

Live video page is displayed after starting the XVR by default, as

shown in figure 5-5.

Figure 5-5 Live video

The XVR also can be accessed in a Web browser. Open a web

browser like Ch rome 45 and enter the IP address of device (The

default IP address is 192.168.0.121) in the address box, and

press . The login page is displayed as shown in figure 7-1.Enter

Web ccessing A

Search for “InView Pro4” in App Store or Google Play to

download and install the mobile client. Use the App to scan the QR

code on the back board of XVR, or in P2P settings page in XVR

user interface. Then input the password of the XVR to add the XVR

into the device list of the App. User can manage the device through

mobile client.

5.5 System

System settings contain Information, General, User, Security

Center, Auto Sequence, Logs, Maintenance and Auto Reboot, as

shown in Figure 5-4.

5.4 Network

Network settings contain Network, 802.1X, DDNS, E-mail, Port

Mapping, P2P, IP Filter SNMP, 3G/4G, PPPoE, Network Traffic

and Platform Access, as shown in figure 5-3. Maybe some models

have more functions, please refer to actual products.

Figure 5-3 Network

ŸSensor Setting: Set the sensor parameter of channels’ cameras.

ŸOSD /Privacy Zone/ROI: Set on live video screen.

ŸChannel Type : set the analog channels’ type, user can set

AUTO/AHD/TVI/CVI/IP.

ŸMicrophone: Adjust and set the microphone of channels.

ŸHuman thermometer/ Smart/ Intelligent Tracking: These

functions are used for special function cameras, configure the

parameters of cameras.

ŸAll these settings can be copied to other channels by clicking

Copy button.

5.3 Alarm

Alarm settings contain General, Motion detection, Camera Tamper,

Video loss, Intelligent analysis, Alarm in, Abnormal alarm, Alarm

out, Local Intelligent Analysis, as shown in figure 5-2

Figure 5-2 Alarm

Figure 5-4 System

System

Channel

Rec ord

Alarm

Network

Sy ste m

Network

802.1X

DDNS

Port Mappi ng

P2P

IP Filter

SNMP

P2 P

En ab le P2P

St atus

P2 P ID

Ap p N am e

- I t is avai la ble on App Sto re an d Google Pl ay

In View Pro 4

A0 11 003AFFPXXXX

On line

ŸGeneral: include system, date and time, time zone, DST, sync

camera time.

ŸUser Account: add user , set advance setting(auto login,

password double authentication, boot wizard) and App

Verification(add whitelist to be allowed which are added to App).

ŸSecurity Center: modify the password, pattern unlock, secure

Email, Secure question.

ŸLayout: set new layout to view live videos of channels. Set

CVBS offset.

ŸLogs: shows operating and alarm log, user can export logs if an

USB disk is plugged in.

ŸMaintenance: include shutdown, reboot, exit system, reset,

import configuration, export configuration and update.

ŸAuto Reboot: enable this function to make device restart

periodically.

Ap ply

Ÿ General: Enable or disable alarm and set duration time of alarm.

Ÿ Motion Detection: Enable this function, if detection the motion

actions, it will alarm.

1. Event actions: Contain buzzer, alarm out, push message to

App, pop-up message to monitor, send E-mail and post recording

( after enabling, choose the recording time from drop list.)

2. Area: set motion detection area. Press left button and drag the

cursor to add a detection area, and double-click an area to delete

it.

3. Schedule: Set schedule to enable or disable motion detection

alarm. There are three methods to set, click the double arrows

button to choose all day. The second, click and drag the cursor to

select periods. The third, click one by one.

ŸVideo Loss, Intelligent Analysis are same settings as motion

detection.

ŸAlarm In Alarm Out/ : settings for I/O alarming.

ŸAbnormal Alarm can tick disk error, IP conflict, network

disconnected.

ŸLocal Intelligent Analysis: set up to 4 channels intelligent

analysis alarm. choose the channel and apply, the XVR will

reboot, then set the parameters of intelligent analysis.

System

Ch ann el

Re cord Al arm Netwo rk System

General

Motion Detect ion

Video Loss

Intelligent Analysis

Alarm In

General

En ab le Alarm

Al arm D uration Ti me (sec)

Ap ply

Abnormal Alar m

Alarm Out

5.2 Record

Record settings contain Record Schedule, Disk, Storage, Disk

Calculation, SMART, Disk Detection, Disk Calculation and FTP.

Set record schedule and storage strategic. User can calculate the

disk’s using time at Disk Calculation interface.

Enter S.M.A.R.T interface to view the state of disks.

Disk Detection can detect the disks.

FTP: set the parameters of FTP upload, the alarm video can be

sent to FTP path.

Activation

Ent er channel default pas sword

Confirm t he new password

Enter a new pas sword

Username

Language

-Valid password range [6-32] characters.

-At leas t 2 kinds of number s, lowercas e, uppercas e or special

-Only these special char acter s are support !@ #$*+-=_%&”’

-Channel default pas sword limi t is not empty

InView Pro4

Analog cameras

Router

Remote monitor

Channel

Record

Network

Alarm

System

Camera Encode

Sensor Setting OSD

Privacy Zone Channel Type

Record Schedule

Disk Network

802.1X

Port Mapping

DDNS

P2P

IP Filter

SNMP

General

Motion Detection

Camera Tamper Video Loss

Intelligent Analysis

Information

General

User A ccount

Security Center Auto Sequenc.

Maintenance Auto Reboot

Storage Mode

S.M.A.R.T

Disk Detection

3G/4G . . .

Logs

Alarm In

Abnormal Alarm . . .

Disk Calculation.

ROI

Microphone

Human Thermmnet. . . .

FTP

Camera Tamper

Local Intelligent Analysis

IO Control Push

Bu zz er Duration Time(se c)

19 2 . 168 . 0 . 1

PPPOE

3G /4G

Al ternate DNS Server

Network Traff ic

Platform Access

In formation

System

Dev ice I D

11_JYE1_00_04

Dev ice Name

Dev ice Type

Dev ice

DVR

Model

0070-10403-A

Firmware Version

V4. 6.0805. 0000.003.0.50. 2.0

HDD Number

Channels Suppor ted

Alarm In

Alarm Out

Audio I n

Audio Out

Ge ne ral

Us er Acc ou nt

Se cu rity Center

La yo ut

Lo gs

Ma in tenance

Au to Reboot

System

Channel

Record

Alarm

Net work

System

U-boot Version

Ker nel Version

15060F1320035

1506017142315

Network

Channel

Disk

Alarm

3G/4G

PPPOE

Network Traffic

Platform Access

IP cameras

Switch/ Router

Produktspezifikationen

Marke:	Ernitec
Kategorie:	Videoaufzeichnungen
Modell:	NVR Hybrid
WLAN:	Nein
Breite:	350 mm
Tiefe:	305 mm
Gewicht:	1800 g
Produktfarbe:	Schwarz
Höhe:	49 mm
Anzahl USB 2.0 Anschlüsse:	2
Betriebstemperatur:	10 - 50 °C
Paketgewicht:	3000 g
Unterstützte Netzwerkprotokolle:	HTTP, HTTPS, TCP/IP, IPv4, UPnP, UDP, RTSP, SMTP, NTP, DNS, DHCP, P2P, IP Filter, DDNS, 802.1X, SNMP
Stromverbrauch (max.):	15 W
Ethernet LAN Datentransferraten:	10, 100 Mbit/s
Zahl der Benutzer:	4 Benutzer
LED-Anzeigen:	Ja
Luftfeuchtigkeit bei Lagerung:	0 - 90 %
Analoges Signalformatsystem:	NTSC, PAL
Maximale Framerate:	30 fps
Ausgangsstrom:	4 A
Ausgangsspannung:	12 V
Maximale Auflösung:	3840 x 2160 Pixel
Ethernet-WAN:	Ja
HDD Kapazität:	- GB
HDD Schnittstelle:	SATA
RS-485-Anschlüsse:	1
Maximale unterstützte Anzahl der HDD:	2
Gewährleistungsfrist:	5 Jahr(e)
Max. Speicherkapazität:	8 TB
Video-Eingangskanäle:	16 Kanäle
Alarm-Eingangskanäle:	4
Alarm-Ausgangskanäle:	1
BNC-Videoeingang:	Ja