Da-Lite Parallax Bedienungsanleitung

Da-Lite Monitor Parallax

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Da-Lite Parallax (8 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

INSTRUCTION BOOK FOR

Parallax™ Screen

Tools Required for Installation

Included Hardware

Phillips Screwdriver Tape MeasurePencil

Large Wall Bracket (47" Long)

Installation screws not included

Quantities vary by screen size:

Screens 80" and smaller viewing width = 1

Screens over 80" to 96" viewing width = 2

Screens over 96" viewing width = 3

Small Wall Bracket (8" Long)

Installation screws not included

Quantity = 1. Only for screens 80" and smaller viewing width.

#8 Stud with Shoulder (8 each) Black Flat Head Screw (12) Elastic Ring

(1 Pack - Usage Varies by Screen Size)

Foam Sheet (1)

Gloves (2 pair)

Disclaimer

Milestone and its ailiated corporations and subsidiaries

(collectively "Milestone"), intend to make this manual accurate

and complete. However, Milestone makes no claim that the

information contained herein covers all details, conditions or

variations, nor does it provide for every possible contingency in

connection with the installation or use of this subject to change

without notice or obligation of any kind. Milestone makes no

representation of warranty, expressed or implied, regarding the

information contained herein. Milestone assumes no

responsibility for accuracy, completeness or suiciency of the

information contained in this document.

Da-Lite® is a registered trademark of Milestone AV Technologies.

Material Handling Guidelines

CAUTION: Handle screen surface with care. Ambient light rejecting screen surfaces are delicate

and should remain lat at all times.

• Carefully and evenly unroll screen surface to ensure latness.

• Do not fold, stretch or crease screen surface.

• Do not allow objects to rest on screen surface.

• Do not puncture screen surface.

• Keep sharp objects away from screen surface.

• Rear side of screen surface is sensitive to scratches, cuts, and

abrasions. Handle with care.

1. Unwrap the frame pieces. Assemble frame pieces on provided

foam sheet. This will help keep the frame clean and protect it

from scratches.

NOTE: The frame pieces are labeled “top” and “bottom”. Be

sure the frame pieces are assembled according to the labels.

This will ensure the attachment pattern on the frame and

screen surface will match.

Figure 1 (Rear View)

Frame Assembly

Cleaning

Parallax screen surface can be cleaned as follows:

Using a white clean cloth (100% cotton preferred) that is dampened with clean water, gently wipe the area in a horizontal direction. Do

not wipe in a vertical direction or with a circular motion. Using a dry 100% cotton cloth, wipe screen surface dry in horizontal direction

after each cleaning. Windex Original spray cleaner can be used on tough to clean areas.

Do not attempt to clean rear side of Parallax screen surfaces.

2. Slide the frame pieces together at corners.

NOTE: The frame assembly holes may not appear to it

properly at the corners until all fasteners have been attached.

Once fasteners are attached, the frame corners will be drawn

in for a proper it.

3. Secure frame pieces with black lat head screws provided. Do

not tighten screws until all are started. See Figure 1.

4. Attach the eight #8 studs to the back of the frame in the

predrilled holes.

Black Flat Head Screws

#8 Studs

Produktspezifikationen

Marke:	Da-Lite
Kategorie:	Monitor
Modell:	Parallax
Befestigungstyp:	Wand
Menge pro Packung:	1 Stück(e)
Natives Seitenverhältnis:	16:9
Einsehbare Bildschirmhöhe (H):	114 mm
Einsehbare Bildschirmbreite (B):	203 mm
Diagonal:	92 "
Antriebstyp:	Manuell