D-Link DXE-820T Bedienungsanleitung

D-Link Netzwerkkarte / Adapter DXE-820T

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für D-Link DXE-820T (2 Seiten) in der Kategorie Netzwerkkarte / Adapter. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Dual Port 10 Gigabit Ethernet PCIe Adapter

DXE-820T

Add 10 Gigabit connectivity to your server or high-powered workstation with the D-Link

DXE-820T Dual Port 10 Gigabit Ethernet PCIe Adapter. It is a high performance network

adapter which combines 10GBase-T with high-speed PCI Express 2.0 x8 interface. The DXE-820T

oers increased bandwidth over standard Cat 6a cabling without the need to overhaul your

infrastructure wiring or invest in a costly upgrade to bre. Furthermore, the PCI express interface

oers increased bandwidth, reliability and functionality compared with standard PCI network

cards. It is specically designed to allow throughput at rates up to 40 Gbps, thus eliminating the

bottleneck that exists with current 32 and 64-bit PCI bus architectures.

Advanced Features and Security

The adapter features onboard screening of 802.1Q VLAN tagged Ethernet frames, allowing you

to assign multiple subnets to each server and isolate devices within each VLAN from the rest

of the network for better trac control and security. With support for advanced features such

as 802.3x ow control, jumbo frames, and SNMP for network management, the DXE-820T can

easily interoperate with your current networking equipment.

Performance and Reliability

The DXE-820T increases network throughput by utilising PCI Express bus architecture. With

Smart Load Balancing™, the DXE-820T congures multiple adapters to work as a team, sharing

trac and ensuring data reliability. This creates both a faster network and provides fault

tolerance resulting in a stable and ecient network.

Checksum Ooading

The DXE-820T features TCP, UDP, and IP checksum ooading functionality, which transfers

the checksum processing tasks from the computer’s CPU to the network card. The DXE-820T’s

ability to handle the checksum processing means that the CPU’s processing power can be used

for other tasks while still achieving 20 Gbps network speeds.

Features

High-Performance:

• PCI Express Interface v2.0

• Auto-negotiation

• Up to 40 Gbps throughput

Advanced Standards-based Enterprise Features:

• 802.1Q VLAN tagging

• 802.3x ow control

• 802.3ad teaming

• Jumbo frame support

• SNMP statistics

• TCP/UDP/IP checksum ooading

High-speed Transmission

High-speed data transmission at rates of up to

40 Gbps allow for seamless data transfer1

Advanced Features

802.3x ow control for trac management, 802.1Q

VLAN tagging for increased security, and checksum

ooading to reduce CPU processing burden

Bandwidth Management

NIC partitioning enables administrators to manage

bandwidth for greater network eciency

Product Highlights

DXE-820T Dual Port 10 Gigabit Ethernet PCIe Adapter

D-Link European Headquarters. D-Link (Europe) Ltd., D-Link House, Abbey Road, Park Royal, London, NW10 7BX.

Specications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.

Updated October 2015

For more information: www.dlink.com

Technical Specications

General

Standards • IEEE 802.1Q VLAN tagging

• IEEE 802.3x flow control

• IEEE 802.3an 10GBASE-T

• IEEE 802.3ab 1000BASE-T

• IEEE 802.3u 100BASE-TX

• IEEE 802.3az Energy-Efficient Ethernet (EEE)

• IEEE 802.3ad teaming

• PCI Express p2-x8 2.0, 5 GT/s compliant

Power • Maximum Power Consumption: 23.38 W • Input Voltage: 3.3 V and 12 V

Data Transfer Rate • 1 Gbps Full Duplex

• 10 Gbps Full Duplex

• Auto mode (support 100 Mbps)

Transmit Distance • 10GBASE-T

• 100M with Cat 6A or higher UTP

• 50M with Cat 6 UTP

• 100/1000BASE-T

• 100M with Cat 5 or higher UTP

Interface Slot PCI Express v2.0 x8/x16 slot Includes standard and low profile brackets• •

Supported Functions NIC partitioning•

• Other performance features

• TCP, IP, UDP checksum

• TCP segmentation

• Adaptive interrupts

• Receive Side Scaling (RSS)

• Manageability

• Statistics for SNMP MIB II, Ethernet-like MIB, and

Ethernet MIB

• SMBus controller

• IPMI support (IPMI pass thru mode)

• Advanced network features

• Jumbo frames (up to 9 KB)

• Virtual LANs

• Smart load balancing teaming

• LiveLink™ (supported in both the 32-bit and 64-bit

Windows operating systems)

• Logical Link Control (IEEE Std 802.2)

• Layer-2 Priority Encoding (IEEE Std 802.1p)

• High-speed on-chip RISC processor

• Up to 3 classes of service (CoS)

• Integrated 96 KB frame buffer memory

• Quality of Service (QoS)

• Support for multicast addresses via 256 bits hashing

hardware function

• JTAG support

• PCI Power Management Interface (v1.1)

• 64-bit BAR support

• iSCSI Boot support

• Virtualization

• Microsoft

• VMware

Functionality

Driver Support Windows Server 2008 (x86, x64)/2008 R2 (x64)•

• Windows Server 2012

• RHEL 6.4/6.5 (x64), RHEL 5.9 (x64)

• SLES 11.2/11.3 (x64)

• Solaris 11/11.1

Diagnostic LED • • Speed/Link Activity

Physical

Dimensions • 181 mm x 120.9 mm x 21.6 mm (7.13 x 4.76 x 0.85 inches)

Temperature • • Operating: 0 to 40 °C (32 to 104 °F) Storage: -20 to 70 °C (-4 to 158 °F)

Humidity • • Operating: 10% to 90% non-condensing Storage: 10% to 90% non-condensing

Certifications • CE

• FCC

• C-Tick

1 When connected in full-duplex mode.

Produktspezifikationen

Marke:	D-Link
Kategorie:	Netzwerkkarte / Adapter
Modell:	DXE-820T
WLAN:	Nein
Breite:	181 mm
Tiefe:	21.6 mm
Übertragungstechnik:	Kabelgebunden
Höhe:	120.9 mm
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Verpackungsbreite:	183 mm
Verpackungstiefe:	190 mm
Verpackungshöhe:	32 mm
Paketgewicht:	251 g
Netzstandard:	IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3an, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Quality of Service (QoS) Support:	Ja
Zertifizierung:	CE\nFCC\nC-Tick
Vollduplex:	Ja
Stromverbrauch (Standardbetrieb):	23.38 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Maximale Datenübertragungsrate:	10000 Mbit/s
Ethernet LAN Datentransferraten:	10,100,1000,10000 Mbit/s
Eingebaut:	Ja
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-20 - 70 °C
Luftfeuchtigkeit bei Lagerung:	10 - 90 %
Jumbo Frames Unterstützung:	Ja
Schnittstelle:	Ethernet
Unterstützung anderer Betriebsysteme:	Solaris 11
Management-Protokolle:	SNMP
Ausgangsspannung:	3.3-12 V
Ethernet Schnittstellen Typ:	10 Gigabit
Palettenlänge (brutto):	1100 mm
Palettenbreite (brutto):	1200 mm
Puffergröße:	96 KB
Unterstützung Datenflusssteuerung:	Ja
Jumbo-Frames:	9000
Hostschnittstelle:	PCI Express
Unterstützte Server-Betriebssysteme:	Windows Server 2008, Windows Server 2008 R2 x64, Windows Server 2012
Versandkartonsbreite:	359 mm
Versandkartonslänge:	393 mm
Versandkartonshöhe:	445 mm
Gewicht (innerer) Versandkarton:	11175 g
iSCSI-Unterstützung:	Ja
Chipsatz:	RISC
Menge pro Versandkarton:	40 Stück(e)
Nettogewicht Versandkarton:	10040 g
Palettenbruttogewicht (Luft):	427300 g
Anzahl der Kartons pro Palette (Luft):	36 Stück(e)
Anzahl pro Palette (Luft):	1440 Stück(e)
Palettenhöhe (Luft):	1915 mm
Palettenbruttogewicht (Meer):	427300 g
Anzahl der Kartons pro Palette (See):	36 Stück(e)
Anzahl pro Palette (See):	1440 Stück(e)
Palettenhöhe (See):	1915 mm
PCI version:	2.0
Ethernet/LAN:	Ja
VLAN-Tagging:	Ja