D-Link DPS-520 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für D-Link DPS-520 (8 Seiten) in der Kategorie Netzwerkkarte / Adapter. Dieser Bedienungsanleitung war für 45 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Quick Installation Guide for
Redundant Power System
Information in this document is subject to change without notice. Reproduction in any manner whatsoever,
without the written permission of D-Link Corporation, is strictly forbidden.
Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and
Windows are registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. D-Link Corporation disclaims any proprietary interest in trademarks and
trade names other than its own.
© 2020 D-Link Corporation. All rights reserved.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
D-Link Corporate
17595 Mt. Hermann Street
Fountain Valley, CA 92708
(800) 326-1688
CE Mark Warning
This equipment is compliant with Class A of CISPR 32. In a residential environment, this equipment may cause
radio interference.
Avertissement Concernant la Marque CE
Cet équipement est conforme à la classe A de la norme CISPR 32. Dans un environnement résidentiel, cet
équipement peut provoquer des interférences radio.
VCCI Warning
この装置は、クラス 機器です。この装置を住宅環境で使用すると電波妨害を引き起こすことがありまA
す。この場合には使用者が適切な対策を講ずるよう要求されることがあります。 VCCI-A
BSMI Notice
此為甲類資訊技術設備,於居住環境中使用時,可能會造成射頻擾動,在此種情況下,使用者會被要求採
取某些適當的對策。
About This Guide
The D-Link DPS-520 is a Redundant Power System (RPS)
provides an aordable, 90 Watt, Power over HDBaseT
(PoH), rack-mountable, RPS solution. This guide provides
step-by-step instructions to setup the RPS and install it to
a switch that supports incoming PoH.
Please note that the model you have purchased may
appear slightly dierent from those shown in the
illustrations. For more detailed information about your
product, its components, making connections, and
technical specications, please refer to the User’s Guide
included with your product.
The DPS-520 provides an eective solution when the
internal power supply of a switch in the network fails,
which can result in the shutdown of a single switching
device or an entire network.
With an RPS connected, an integrated detection circuit
continuously monitors the switchs internal power
supply. In the event of a power interruption, the RPS is
immediately triggered so that the switch and connected
devices can continue providing services. This results in
a more reliable network infrastructure and protects the
network from a single failure of a network device power
supply.
Description
The DPS-520 is an RPS unit features four Gigabit Ethernet
90W PoH ports and one Gigabit Ethernet Management
port (MGMT). It is designed to conform to the power
requirements of the switches being supported.
Using PoH, it connects to a PoH-enabled switch using
a standard Ethernet UTP/STP cable. A standard, three-
pronged AC power cable connects the RPS to the main
power source.
Figure 1 - Front View of the DPS-520
Rack Installation
The DPS-520 can be installed on a desktop or into a
standard switch rack by inserting it into an additional
DPS-800.
The DPS-800 is a standard-size rack mount (1.25U in
height) designed to hold up to two RPS units.
Figure 2 - Installing the DPS-520 into the DPS-800
Figure 3 - Installing the DPS-800 in a standard switch rack


Produktspezifikationen

Marke: D-Link
Kategorie: Netzwerkkarte / Adapter
Modell: DPS-520
Breite: 196 mm
Tiefe: 257 mm
Gewicht: 1150 g
Produkttyp: Stromversorgung
Produktfarbe: Schwarz
Höhe: 52 mm
Energieschutzeigenschaften: Überstrom
Betriebstemperatur: 0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb: 10 - 90 %
Power over Ethernet (PoE): Ja
Netzteil Eingansgsspannung: 90 - 264 V
Anzahl Ethernet-LAN-Anschlüsse (RJ-45): 5
Warentarifnummer (HS): 85044095
Ethernet LAN Datentransferraten: 10,100,1000 Mbit/s
Eingebaut: Nein
LED-Anzeigen: Ja
Temperaturbereich bei Lagerung: -40 - 70 °C
Luftfeuchtigkeit bei Lagerung: 5 - 90 %
Rack-Einbau: Ja
Netzteilfrequenz: 47 - 63 Hz
Web-basiertes Management: Ja
Ethernet Schnittstellen Typ: Fast Ethernet, Gigabit Ethernet
Eingangsstrom: 2 A
Gesamtleistung Power over Ethernet (PoE): 180 W
Maximaler Arbeitsabstand: 100 m
Anzahl Lüfter: 1 Lüfter
Einfache Installation: Ja
Power over Ethernet (PoE) Spannung: - V
RJ-45-Ausgangsanschlüsse: 4
Power over Ethernet (PoE) Leistung pro Anschluss: 90 W
Externer Management-Port: RJ-45 (Gigabit)

Brauchst du Hilfe?

Wenn Sie Hilfe mit D-Link DPS-520 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Netzwerkkarte / Adapter D-Link

Bedienungsanleitung Netzwerkkarte / Adapter

Neueste Bedienungsanleitung für -Kategorien-