Cudy GS1005PTS1 Bedienungsanleitung

Cudy Schalten GS1005PTS1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Cudy GS1005PTS1 (2 Seiten) in der Kategorie Schalten. Dieser Bedienungsanleitung war fĂŒr 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Physical Appearance2Hardware Connection1
Power Socket
Ethernet Device
(switch, router, etc.) Wireless AP Smart VoIPIP Camera
Powered Device (PD)
Internet
Front board
PoE Port
Ethernet Port
SFP Slot
Router
SpeciïŹcations
3
Network protocol
PoE Protocol
Network Medium
Optical Media
Model
Power
Ethernet
Switching Capacity
Throughput
Packet Buffer
MAC Address
Jumbo Frame
Transfer Mode
MTBF
Working Temperature
Storage Temperature
GS1005PTS1
Input: AC 100-240V, 50/60Hz
4*10/100/1000M PoE Port
1*10/100/1000M RJ45 Port
1* Gigabit SFP Uplink Port
12Gbps
8.928Mpps
1Mb
2K
9216bytes
Store and forward
100000 hour
0~40°C
-40~85°C
IEEE802.3 (10Base-T) / IEEE802.3u (100Base-TX)
IEEE802.3ab (1000Base-TX) / IEEE802.3z (1000Base-FX)
IEEE802.3x (Flow control)
IEEE802.3af (15.4W) IEEE802.3at (30W)
IEEE802.3at 4 Pairs (60W)
10Base-T : Cat3、4、5 or above UTP(≀100m)
100Base-TX : Cat5 or above UTP(≀100m)
1000Base-TX : Cat5 or above UTP(≀100m)
Multimode ïŹber : 50/125, 62.5/125, 100/140ÎŒm
Single mode ïŹber: 8/125, 8.7/125, 9/125, 10/125ÎŒm
4 GbE PoE ports + 1 GbE ports + 1 SFP Slot
120 Watts total PoE budget
60 Watts maximum for port #1 (802.3at/af)
30 Watts maximum for port #2~#4 (802.3at/af)
VLAN mode support for port #1~#4
Extend mode support for port #3~#4
Quick Installation Guide
Model: GS1005PTS1
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The
original EU declaration of conformity may be found at http://www.cudy.com/
810600090
Email: support@cudy.com
www.cudy.com
LED and Interface Explanation
5
PWR
Mode
Link ACT
Power LED
Mode LED
Link LED
ON
OFF
ON
OFF
Flashing
ON
OFF
Flashing
Power on
Power off
Port Isolation
Standard switching
Link extension
Link connected
Link disconnected
Link data transmitted
DIP Explanation
4
VLAN
(1-4 Ports)
Default
Extend
(3-4 Ports)
Port Isolation
Standard Switch
Link Extension
Downlink designated ports are isolated
from each other, only transmit data with
the uplink port.
All ports communicate freely
The speciïŹed port speed drops to 10Mbps/s,
max PoE transmission is 250 meters.


Produktspezifikationen

Marke: Cudy
Kategorie: Schalten
Modell: GS1005PTS1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cudy GS1005PTS1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schalten Cudy

Bedienungsanleitung Schalten

Neueste Bedienungsanleitung fĂŒr -Kategorien-