Cranborne Audio Carnaby HE2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Cranborne Audio Carnaby HE2 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Congratulations on your purchase of Carnaby HE2 and thank you for selecting
Cranborne Audio to be a part of your music creation process.
Please download the full User Manual from the Carnaby HE2 product
page on the Cranborne Audio website
www.cranborne-audio.com
Carnaby HE2 Quick Start Guide
Safety Information 2
General Safety 2
Installation notes 2
Power Safety 3
CE Certification 3
FCC Certification 4
RoHS Notice 4
Instructions for disposal of WEEE by end users in the European Union 4
Electromagnetic Compatibility 5
Package Contents 5
Front Panel Controls and Connectors 6
Rear Panel Controls and Connectors 8
Carnaby HE2 Quick Start Guide -Page 1- ©2024 Cranborne Audio Ltd
Safety Information
General Safety
- Read these instructions carefully
- Keep these instructions
- Heed all warnings
- Follow all instructions
- Do not use this apparatus near water
- Clean only with a dry cloth
- Do not block any ventilation openings and install in accordance with the
manufacturers instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of a grounding-type plug. A polarised plug
has two blades with one wider than the other. A grounding type plug has two
blades with a third grounding prong. The wide blade or the 3rd prong are
provided for your safety. If the provided plug does not fit your outlet, consult
an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories recommended by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long
periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
- Do NOT modify this unit, alterations may affect performance, safety and/or
international compliance standards.
- Cranborne Audio does not accept liability for damage caused by maintenance,
repair or modification by unauthorised personnel.
Installation notes
- When installing the apparatus either fit it into a standard 19” rack or place it
on a secure level surface.
- If the unit is rack mounted, fit all rack screws.
- When rack mounting, allow adequate ventilation above and below the unit to
enable cooling.
- Ensure that no strain is placed on any cables connected to this apparatus.
Ensure that all such cables are not placed where they can be stepped on,
pulled, or tripped over.
WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
ATTENTION: Afin de réduire les risques de choc électrique,
ne pas exposer cet appareil à l’humidité ou à la pluie.
Carnaby HE2 Quick Start Guide -Page 2- ©2024 Cranborne Audio Ltd
Power Safety
- The unit is supplied with an internal power supply and suitable mains lead.
Only use the supplied mains lead, however if you decide to use a mains lead
of your choice, bear in mind the following:
- Refer to the rating label of the unit and always use a suitable mains
cord.
- The unit should ALWAYS be earthed with the earth on the IEC socket.
- Please use compliant 60320 C13 TYPE SOCKET. When connecting to
supply outlets ensure that appropriate sized conductors and plugs are
used to suit local electrical requirements.
- Maximum cord length should be 4.5m (15’)
- The cord should bear the approval mark of the country it is to be used.
- Connect only to an AC power source that contains a protective earthing (PE)
conductor.
- Only connect the unit to single phase supplies with the neutral conductor at
earth potential.
GB The apparatus shall be connected to mains socket outlets with a protective
earthing connection.
DEN Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver
forbindelse til stikproppens jord.
FIN Laite on lilettävä sojamaadoituskoskettimilla varustettuun pistorasiaan.
NOR Apparatet må tilkoples jordet stikkontakt.
SWE Apparaten skall anslutas till jordat uttag.
ATTENTION: Un-earthed metal parts may be present inside the
enclosure. No user serviceable parts inside - to be serviced only
by qualified personnel. When servicing, disconnect all power
sources before removing any panels.
CE Certification
This unit is CE compliant. Note that any cables supplied with
Cranborne Audio equipment may be fitted with ferrite rings at each
end. This is to comply with the current regulations and these ferrites
should not be removed.
Carnaby HE2 Quick Start Guide -Page 3- ©2024 Cranborne Audio Ltd


Produktspezifikationen

Marke: Cranborne Audio
Kategorie: Nicht kategorisiert
Modell: Carnaby HE2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cranborne Audio Carnaby HE2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Cranborne Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-