Coleman Pebble Creek Bedienungsanleitung

Coleman Zelt Pebble Creek

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Coleman Pebble Creek (3 Seiten) in der Kategorie Zelt. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
Connect Frame to Tent
– Insert one pin into the end of main black tent
pole to the side of the door. (illus. 3), (illus. 4)
– Go to opposite end of pole and gradually
apply pressure to the pole forming an arch
until you are able to insert the pin into the
pole end.
– Repeat for second pole.
– Insert remaining pin into the end of side pole,
go to opposite end of pole and apply
pressure until you arch the pole and can
insert the pin into the pole. (illus. 3), (illus. 4)
– Repeat for other side pole.
Pebble Creek20x11
1Layout & Positioning
of Tent, Pole Assembly
– Layout and position tent with doors
facing desired direction. (illus. 1)
– Unzip doors.
– Stake down tent corners, using the stake
loops. Keep the floor taut. (illus. 2)
– Stake down tent through the rings on the pin
and ring system.
Assemble frame poles by interlocking shock-
corded poles. (four poles)
– Insert the poles into pole sleeves. The longer
black poles should cross forming an “X” in
the middle of tent. The shorter side grey
poles insert into sleeves running front to
back. The shorter black center pole runs
straight front to back. (illus. 1)
2
When You Are Ready
To Set Up Your Tent
Select a level campsite clear of
rocks, branches and other hard
or sharp objects.
Do not set up your tent under trees.
For best results in windy conditions,
position the end of tent into the wind.
(2) Rainfly Poles
Side poles
(Grey)
Short Center
Pole (Black)
Assembled poles inserted
through pole sleeves
Instructions apply to Part Number 9272-210C
illus. 1
illus. 2
Tent stake
through ring
on stake loop
illus. 4
Tent frame
set-up
Part No. 9272-321
Part No. 9272-323
Part No. 9272-325
Part No. 9272-315
illus. 3
Insert pin into pole end
Rainfly
(2) Main Tent Poles
(Black)
(2) Side Poles (Grey)
Part No. 9272-319
Part No. 9272-317
(1) Center Pole
(Black)
(2) Upright Poles
(Black)
POLE ASSEMBLY PARTS
3Attach Center Pole and Upright Poles to
Hub.
– Insert center pole end into top of hub.
Repeat for other end. (illus. 5), (illus. 6)
– Insert the upright pole end with the clip
into the bottom of the hub until it clicks
into position. (illus. 5), (illus. 6)
– Insert the metal clip located at the
center of the tent, into the bottom
of the upright pole. (illus. 7)
– Repeat for second upright pole
on other side of tent.
Attach Frame Clips
Attach frame clips along the edges of
tent to frame poles. (illus. 6), (illus. 8)
5
4illus. 6 Assembled tent without rainfly
.
illus. 8
Frame clips
illus. 10 Completed tent with rainfly.
illus. 7
illus. 5
Center pole inserted into top of Hub
and Upright pole inserting into bottom
of hub.
illus. 9
Rainfly
Underside of rainfly
attaches to frame poles
Grommets for
rainfly poles
Rainfly pole
sleeves
Rainfly poles
Guylines
Attach Rainfly
Assemble rainfly poles by interlocking
shock-corded poles.
– Insert rainfly poles into pole sleeves
located at the center edges of the
underside of rainfly. (illus. 9), (illus. 10)
– Drape rainfly over tent frame, pole side
down. Rainfly poles should be over front
and rear doors. (illus. 10)
– Hook the eight elastic loops (found at the
rainfly corners) to the fabric loops on the
bottom row of frame clips. (illus. 11)
– Insert the tips of the rainfly poles into the
grommets on the front and rear of tent.
(See above illus. 6)
– Secure rainfly with attachments located
on underside of fly. (illus. 9)
Attach and stake out guylines.
PRINTED IN SRI LANKA Rev. 11/04
Things You Should Know
Under certain conditions (cold weather, high humidity, etc.)
condensation will form on the inside surfaces of your tent. Condensation is
caused by water vapor from your breath, perspiration, or any wet clothing
inside your tent. It is NOT LEAKAGE through the tent fabric. It can be
minimized by removing wet clothing from your tent and by providing good
ventilation through the tent.
Never store tent, even for a short period of time, without drying it
thoroughly and brushing off caked dirt. Do not pack stakes or poles inside
your tent. Use a separate storage bag.
STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF.
NEVER PULL ON THE TENT FABRIC OR TENT STAKE LOOP TO
REMOVE STAKE.
TENT POLES SHOULD NOT BE LEFT TELESCOPED
TOGETHER DURING STORAGE.
Seam sealer has not been provided with your tent. For additional protection
we recommend seam sealing your tent prior to camping. Seam sealer may be
purchased through your local retailer or at your local sporting goods store.
Do not leave your tent set-up for weeks at a time, be aware that
exposure to the ultraviolet rays of the sun can seriously damage material
and/or cause it to become discolored.
WARNING: KEEP ALL FLAME AND HEAT SOURCES
AWAY FROM THIS TENT FABRIC. This tent meets the flammability
requirements of CPAI-84.The fabric will burn
if left in continuous contact with any flame source.The application of
any foreign substance to the tent fabric may render the flame-resistant
properties ineffective.
illus. 11
Hooks attach to
fabric loop
IMPORTED BY
SUNBEAM CORPORATION (CANADA) LIMITED
5975 Falbourne Street, Mississauga (Ontario) L5R 3V8
1 800 387-6161 www.colemancanada.ca
MADE IN SRI LANKA


Produktspezifikationen

Marke: Coleman
Kategorie: Zelt
Modell: Pebble Creek

Brauchst du Hilfe?

Wenn Sie Hilfe mit Coleman Pebble Creek benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Zelt Coleman

Bedienungsanleitung Zelt

Neueste Bedienungsanleitung für -Kategorien-